• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.385-394
• /
• 2013

Short-term agricultural machinery rental system has been operated by agricultural extension organization of local government (agricultural technology center) and sponsored by Ministry of Agriculture, Food, and Rural Affairs, to improve utilization efficiency and save agricultural production cost through joint utilization of agricultural machinery. This study was conducted to analyze current status of the rental system operation and provide recommendations for future direction. Question survey was conducted for officers in charge of the rental system in the technology center, and strategic improvement was suggested through importance performance analysis (IPA). Survey results showed that 11 issues should be reformed or improved by 2015, which is not practically feasible. IPA analysis resulted that administration and manpower support, cooperation between federal and local organizations, and cooperation with other organizations should be focused for successful operation of the rental system. Issues that seem to happen after 2015 need to be handled as future research.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1300-1309
• /
• 2010

In the railway bridges, steel plate girder types are preferred due the high stability. Nevertheless, it has been pointed out that this type of bridge has problems such as, structural damages in the rail and girder seat, noise problem due to impact at the rail joint and excessive vibration. This vibration and/or deflection are mainly because insufficient stiffness of steel plate type of bridge. To resolve these problems, PC-Slab composite plate girder type which has simple process and economic cost, is proposed in this study. The static and dynamic experiment is performed by using the production of actual sized PC-Slab and abandoned steel plate girder. The object of this experiment is to verify the fact that girder stiffness increase and structural safety. The result of the experiment is used to analyze the effect of performance improvement of PC composite plate girder type. Using this method, economic rail maintainers, girder stiffness increase, and also speed/ride improvement even for existing rail could be expected by dynamic performance improvement. Additionally noise due to impact, deflection and vibration caused from long rails can be reduced.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.199-204
• /
• 1999

As the engine design change to get high efficiency and performance of commercial diesel engine, surface wear of the cam follower becomes an important issues as applied load increasing at the contact face between cam follower and cam. Purpose of this study is the developing of the ceramic cam follower made of silicon nitride ceramic which is more wear resistant than the cast iron and sintered cam follower. Ceramic cam follower was made by direct brazing of thin ceramic disk to steel can follower body using active bracing alloy. Effect of joining condition on the interfacial phases and joining strength wer examined at bvarious joining temperatures, times, and cooling rates. Crowning resulted from the difference of thermal expansion coefficient after direct brazing without using any stress-relieving inter layer was measured. Interfacial phases are mainly titanium silicide and titanium nitride which are the products between active metal(Ti) in brazing alloy and silicon nitiride. Maximum joining strength of the ceramic metal joint, measured by DBS method, was 334MPa. Crowning(R) of the prototype ceramic cam follower was 1595mm. As machining for crowning is not necessary, production cost can be reduced.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.2
• /
• pp.51-55
• /
• 2006

Since 1970, China has become the biggest cocoon producer in the world, and made the highest historical record of cocoon output for 759,800 tons in 1995. However, in 1996 cocoon production reduced sharply to 470,900 tons. After a ten-year adjustment and reform, sericultural areas have shifted from developed regions to developing regions and from the east to the west. From 2000, the cocoon output has started to increase restoringly. By 2004 it recovered to 547,091 tons. With the development of market economy, sericulture management has been changed, including mulberry fields concentrated to the specializated households and cooperatives, cocoons produced in larger scale instead of individuals, Silkworm egg producing enterprises gradually changed into non-governmental joint-stock ones. The mechanism of market cocoon price has been gradually established. The management model of combination of trade, industry and agriculture is pushing and improving. It is the fruit of modern science and technology, especially sericultural basic research, that provides China's sericulture with the opportunity and vital force. China's sericulture, therefore, will continue to develop steadily in future.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.195-197
• /
• 2005

An intermediate heat exchanger(IHX) is a key component in a next-generation VHTR with process heat applications such as hydrogen production and also for an indirect gas turbine system. Therefore, high temperature brazing with nickel-based filler metal(MBF-15) was carried out to study the joining characteristic(microstucture, joining strength) of nickel-based superalloy(Haynes 230) by vacuum brazing. The experimental brazing was carried out at the brazing process, an applied pressure of about 0.74Mpa and the three kinds of brazing temperatures were 1100, 1150, and $1190^{\circ}C$ with holding time 5 minute. It's joining phenomena were analyzed by optical microscopy and scanning electron microscopy with EPMA. The results of microstructure in the centre-line region of a joint brazed with MBF-15 show a typical ternary eutectic of v-nickel, nickel boride and chromium boride.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.36-40
• /
• 2018

The car requires an inside mirror installed between the driver's seat and the passenger's seat to ensure the driver's rear and side view of the driver. Inside mirrors must always be attached to the vehicle to ensure the driver's visibility. Inside mirrors attached to the windshield of a vehicle are always exposed to direct sunlight and should be semi-permanently usable in hot and humid summer weather in Korea. Therefore, the mirror mount, which is the junction of the inside mirror, is particularly important in corrosion resistance and wear resistance suitable for humidity. Mirror mounts are currently difficult to manufacture due to their reliance on powder molding technology in advanced countries such as Japan and Germany. This paper focuses on the fabrication of high corrosion resistant stainless mirror mounts by vacuum sintering technique and focuses on the selection of materials suitable for the production of mirror mounts through experiments of 300 series stainless steel and 400 series stainless steel manufactured by vacuum sintering.

• PNF and Movement
• /
• v.5 no.1
• /
• pp.29-35
• /
• 2007

Purpose : The purpose of this study was investigated to find the approach in the PNF and TC for frail elder Method : This is a literature study with books, articles, seminal note and books for PNF and TC international course. Result : Neural mechanisms contribute significantly to the gains that occur in the range of motion about a joint with stretching exercises. The participation in a stretch-training program decreases tonic reflex activity and increases flexibility and decreases in force production and muscle activation. Also the stretching-induced decreases may be due to a central nervous system inhibitory mechanism. PNF stretch techniques can increase ROM in older adults. These results may differ from those of studies performed with younger populations because of age-related physiologic changes. TC exercise improves balance control and muscle strength and were associated with reorganized lower extremity neuromuscular patterns. Conclusions : The stretch training program of the PNF and TC contribute to increase the balance and coordination for frail elder. Therefore, The frail elder prevent falling. Further study, The PNF and TC be introduced as the new therapeutic intervention for frail elder.

• Corrosion Science and Technology
• /
• v.3 no.4
• /
• pp.154-160
• /
• 2004

The Sulfide Stress Corrosion Cracking (SSCC) resistance of structural steels is one of the critical concerns for the operators, material designers, and fabricators of oil-field equipment, especially treating sour gas (H2S) containing fluids. As far as its fabricators concerned, the systematic care of welding parameters should be taken to obtain comparable SSCC resistance of their weldment to that of its base material. In this respect, every different type of welding joint design for this use should be verified to be SSCC-proof with relevant test procedures. In this study, the welding parameters to secure a proper SSCC resistance of steel pipe's weldments were reviewed on the Welding Procedure Qualification Records (WPQR), which had been employed for actual fabrication of an offshore structure for oil and gas production. Based on this review, a guideline of welding parameters, such as, heat input, welding consumable for Y.S. 65 ksi class steel pipe material is proposed in terms of the NACE criteria for SSCC resistance.

• Journal of Welding and Joining
• /
• v.29 no.4
• /
• pp.67-72
• /
• 2011

The proportion of the welding in the production process of machinery, buildings and marine structures is increasing and the joining are mainly conducted by butt and fillet weld. In the case of fillet weld, the shape of structures is complicated depending on the constraint on the geometry of the structures, therefore, the full penetration is mostly difficult. Accordingly, it is necessary to establish safe and economical criteria of design of the structures through the strength based on the penetration state of the fillet weld. Patterns of fatigue failure in cruciform fillet weld jont appear in the form of the root, toe and mixed failure. In the case of toe and mixed failure, the fatigue strength is higher than root failure. Therefore, we have to make the enough depth of penetration or perform the welding work through improving the fatigue strength of cruciform joints in welded structures. So it is necessary to optimize the penetrated depth in the range of the possible mixed failure and find the way in the cost-effective design to lessen the amount of the welding work.

• Journal of the Korean Regional Science Association
• /
• v.8 no.2
• /
• pp.11-26
• /
• 1992

In spite of her abundant natural resources for tourist industry, Kangreung and Sokcho area became lagged in economic development during the national industrialization. The major purpose of this study is to exactly purpose of this study is to exactly measure the impacts of tourist industry on regional development. Through the regional input-output analysis, we found some critical facts: (1) Input coefficients are relatively high in those industries as fish products, food and drink products, and printing and publishing. (2) Input coefficients are high in fiber and apparel products, and other manufac-turing. (3) Induced production effects are high in chemical and coal products, fish products, food and fish products, printing and publishing, and public administration for Sokcho. (4) As for the induced employment effect, food and lodging, other services, wholesale and retail show high coefficients. (5) As for the location quotients, food and lodging, fish products, transportation and ware housing are identified as basic industries. Through the questionnaire survey, we also found some important facts: (1) Residents tend to evaluate employment effects higher than the income effects from resort-related development. (2) Pollution, forest demolition, general price increase, and traffic congestions are more serious than ever reported. (3) Willingness to participate in resort development is high, but is discouraged by the lack of regional capital. Based on these findings, we suggest some future directions of tourist industry: (1) blocking the leakage of income produced in tourist and tourist industry, (2) connection between fishery and tourist industry, (3) development of tourist route, and (4) administrative reshuffling that helps joint development between private and public sectors.