• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1651-1656
• /
• 1995

The adhesively bonded tubular single lap joint shows large nonlinear behavior in the loaddisplacement relation, because structural adhesives for the joint are usually rubber toughened, which endows adhesives with nonlinear shear properties. since the majority of load transfer of the adhesively bonded tubular single lap joint is accomplished by the nonlinear behavior of the adhesive, its torque transmission capability should be calculated incorporating nonlinear shear properties. However, both the analytic and numerical analyses become complicated if the nonlinear shear properties of the adhesive are included during the calculation of torque transmission capabilities. In this paper, in order to obtain the torque transmission capabilities easily, an iterative solution which includes the nonlinear shear properties of the adhesive was derived using the analytic solution with the linear shear properties of the adhesive. Since the iterative solution can be obtained very fast due to its simplicity, it has been found that it can be used in the design of the adhesively bonded tubular single lap joint.

• 한방재활의학과학회지
• /
• 제29권4호
• /
• pp.135-142
• /
• 2019

The objective of this study is to propose Korean Medicine treatment for recurrent limb weakness after Guillain-Barre syndrome (GBS) improvement by intraveinous immunoglobulin, and to report its effectiveness. Manual muscle test (MMT), Korean modified Bathel index (K-MBI), and tendon reflex were used to evaluate the patient. The patient was improved hip joint, knee joint, ankle joint MMT from grade 3-/3- to grade 5/5 and in the upper limb the patient can do big joint exercise but cannot do micromovement like writing or using cell phone. When discharge date the patient's wrist joint MMT grade is improved grade 5-/5- to grade 5/5. The K-MBI score is improved from 71 to 86 and there was a big change in walking and chair/bed transfer, there was no change in tendon reflex. This study suggests that Korean Medicine can be effective for patients who have recurrent limb weakness after GBS improvement.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.1-21
• /
• 2022

In the structural analysis of steel frames, joints are generally considered as rigid or hinged considering their moment transfer ability. However, the first studies conducted with the beginning of the 20th century showed that the joints do not actually fit these two definitions. In reality, a joint behaves between these two extreme points and is called semi-rigid. Including the actual state of the joint in the structural analysis provides significant economic advantages, so the subject is an intense field of study today. However, it does not find enough application area in practice. For this reason, a large-scale literature published from the first studies on the subject to the present has been examined within the scope of the study. Three important points have been identified in order to examine a joint realistically; modelling the load-displacement relationship, performing the structural analysis and how to design. Joint modelling methods were grouped under 7 main headings as analytical, empirical, mechanical, numerical, informational, hybrid and experimental. In addition to the moment-rotation, other important external load effects like axial force, shear and torsion were considered. Various evaluations were made to expand the practical application area of semi-rigid connections by examining analysis methods and design approaches. Dynamic behaviour was also included in the study, and besides column-beam connections, other important connection types such as beam-beam, column-beam-cross, base connection were also examined in this paper.

• Archives of Plastic Surgery
• /
• 제47권5호
• /
• pp.451-459
• /
• 2020

Background For volar soft tissue defects of the proximal interphalangeal (PIP) joint, free flaps are technically challenging, but have more esthetic and functional advantages than local or distant flaps. In this study, we compared the long-term surgical outcomes of arterial (hypothenar, thenar, or second toe plantar) and venous free flaps for volar defects of the PIP joint. Methods This was a single-center retrospective review of free flap coverage of volar defects between the distal interphalangeal and metacarpophalangeal joint from July 2010 to August 2019. Patients with severe crush injuries (degloving, tendon or bone defects, or comminuted/intra-articular fractures), thumb injuries, multiple-joint and finger injuries, dorsal soft tissue defects, and defects >6 cm in length were excluded from the study, as were those lost to follow-up within 6 months. Thirteen patients received arterial (hypothenar, thenar, or second toe plantar) free flaps and 12 received venous free flaps. Patients' age, follow-up period, PIP joint active range of motion (ROM), extension lag, grip-strength ratio of the injured to the uninjured hand, and Quick Disabilities of Arm, Shoulder & Hand (QuickDASH) score were compared between the groups. Results Arterial free flaps showed significantly higher PIP joint active ROM (P=0.043) and lower extension lag (P =0.035) than venous free flaps. The differences in flexion, grip strength, and QuickDASH scores were not statistically significant. Conclusions The surgical outcomes of arterial free flaps were superior to those of venous free flaps for volar defects of the PIP joint.

• 수산경영론집
• /
• 제50권4호
• /
• pp.11-28
• /
• 2019

In this study, the Inter-Korea Fisheries Cooperation Project was divided into four categories: North Korea's Fisheries Infrastructure Development Project, Fisheries Cooperation Project, Human Exchange Project, and North Korea Fisheries Investment Project. First, North Korea's fisheries infrastructure development projects include North Korea's fisheries resource research project, it's fisheries resource development project, and joint enforcement on illegal operation of Chinese ships. Second, fisheries cooperation projects include the operation of the North-South common fish area in the West Sea, the fishing project in North Korea's East sea, and the import of North Korean seafood. Third, human exchange projects include training of aquaculture technicians in North Korea, technology transfer and training of fishing vessels, and boarding of North Korea's fisherman in Korean fishing vessels. Fourth, North Korea's fisheries investment projects include aquaculture facilities and aquaculture feed support, aquatic product processing facilities and technology transfer, and fishery equipment support. However, as international sanctions are maintained in the international community to North Korea, Inter-Korea Fisheries cooperation, however, should be promoted according to the level of easing of international sanctions as international sanctions are maintained in the international community to North Korea. First, North Korea's fisheries resource research project, North Korea's fisheries resource creation project, joint enforcement on illegal operation of Chinese ships, and operation of the common fish area in the West Sea can be promoted if international sanctions are maintained at present, promote North Korea's fisheries resource research project. Second, boarding of North Korean's fisherman in Korean fishing vessels, conducting the fishing project in North Korea's East sea, and importing North Korean seafood can be aided if commercial transactions are possible with North Korea. Third, South Korea will support aquaculture facilities and aquatic feed, fisheries processing facilities and technology transfer, fishery equipment support, training of fisheries and aquaculture technicians, fishery fishing technology transfer, and training of fisherman when a comprehensive economic cooperation project is possible with North Korea.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.611-616
• /
• 1994

Most of Commercial Remote Center Compliance(RCC) devices have been designed using deforma ble structures. In this work, we propose another type of assembly devices which generate the compliance effec ts by attaching the compliances (or spring) at the prismatic joints of the griven mechainsm. First, the kinematic analysis for a parallel-type planar 3-degree-of-freedom mechanism is performed using modified transfer method of generalized coordinate. Then, compliance characteristics for the mechanism using prismatic joint compliances are investigated. In particular, when the system maintains its symmetric configuration, the mechanism is show n to have RCC points at the center of the workspace. Finally, sensitivity analysis around RCC points is perfor med.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.185-191
• /
• 2001

In many papers, the powertrain system generally has been madeled as one-dimensional torque model. One-dimensional powertrain model may calculate the torque correctly but it does not consider the non-rotational degrees-of-freedom of the powertrain components and the interaction of these degrees-of-freedom with the vehicle body frame and suspension. To consider the non-rotational degrees of freedom, the differential is modeled as a three-dimensional rigid body in this paper. A constant velocity joint is newly formulated and a relative constraint is also formulated to model the motion transfer due to gear ratio of the differential. Implementing the proposed powertrain system in the multibody model, more detail dynamic responses can be obtained. Obtained outputs such as reaction torques on the constant velocity joint and reaction forces on the rack can be useful data in the design of a powertrain.

• 대한토목학회논문집
• /
• 제26권4D호
• /
• pp.593-600
• /
• 2006

줄눈 콘크리트포장의 줄눈폭의 크기는 인접한 슬래브의 온습도 변화에 따른 체적변형에 기인하여 발생하고 인접 슬래브 간 하중 전달율에 영향을 미치며 줄눈채움재의 설계를 위한 중요한 인자이다. 슬래브의 온도가 하강하거나 습도가 감소하면 줄눈폭은 증가며 일반적으로 최대 줄눈폭은 AASHTO Guide에서 제안된 식을 사용하여 예측하고 있다. 동일한 포장 구역 내에서도 각각의 줄눈별로 발생되는 줄눈폭의 크기가 상당한 차이를 보이고 있는 반면, AASHTO 줄눈폭 예측식은 동일 포장 구역 내에서는 각 줄눈들에서 동일한 줄눈폭이 발생한다는 가정을 갖고 개발되었다. 이러한 가정은 AASHTO 줄눈폭 예측식이 임의 포장구역 내에서의 줄눈폭의 평균값에 대한 예측만을 가능하게 하여 상당부분의 줄눈에 대해서는 과소평가를 초래한다는 단점을 갖게 한다. 이로인해 최대 줄눈폭이 과소평가된 줄눈에서는 줄눈채움재가 조기파손하고, 하중 전달율이 불량하여 단차가 발생할 소지가 높고, 수분의 하부침투 및 세골제등이 줄눈폭 사이에 침입하여 스폴링을 유발할 가능성이 높아진다. 이러한 파손들은 포장 설계시 고려되지 않기 때문에 계획된 포장 수명이 도달하기 전에 포장공용성이 저하되게 한다는 문제점이 있다. 본 연구에선 다양한 줄눈콘크리트포장의 줄눈폭 모니터링 데이터를 포함하고 있는 LTPP SMP Data를 이용하여 임의 포장 내에서의 최대 줄눈폭의 크기가 어떤 분포양상을 나타내는지 고찰하고 줄눈폭이 과소평가되는 비율을 포장설계자가 선택할 수 있도록 하는 확률론적 줄눈폭 예측 모델을 개발하였다.

• Archives of Reconstructive Microsurgery
• /
• 제22권2호
• /
• pp.63-68
• /
• 2013

Purpose: In case of the failed replantation, if the patients want to preserve the length of amputated stump, toe transfer is the ideal choice. However, reconstruction of these amputated stump with a free flap can be a useful method when the patients refuse sacrificing their toe. Our purpose of this study is to evaluate availability of functional results and patient satisfaction after this procedure. Materials and Methods: From March 2008 to February 2012, we reconstructed the amputated stump with free flap by patients demand. Eleven patients were included, medial plantar artery perforator flap in seven cases and great toe pulp flap in five cases. Follow-up range 12 to 24 months and we evaluate patient satisfaction by using a visual analogue scale (VAS; 1=unsatisfied, 5=excellent) and functional recovery by measuring the range of motion of remaining joint at 12 months after operation. Results: During follow-up period, all transferred free flaps survived and no major complications were noted. Range of motion of remaining joint appeared satisfactory result ($15^{\circ}$ to $100^{\circ}$). The VAS patient satisfaction score for aesthetic were five in six patients, four in four patients, and three in one patient. Conclusion: In case of the failed digital replantation, if patient refuse toe transfer, it could be useful method to reconstruction with the free flap to preserving maximal length of amputated stump.

• Archives of Reconstructive Microsurgery
• /
• 제20권1호
• /
• pp.82-88
• /
• 2011

Vascularized free fibula head transfer is an established method for reconstruction of long bone defects of the upper limb involving the distal radius or the proximal humerus. For the wrist following tumor resection, in cases of resection of the radial articular surface, three reconstructive options are possible: 1. fibular head transfer to replace the radial joint surface, 2. fixation of the fibula to the scaphoid and lunate, 3. complete wrist fusion. The decision on the type of the operation depends on the amount of the resection and the remained normal anatomical structures, and also the necessity of function of the wrist in the future. The authors believe that the vascularized free fibula head graft is a safe and reliable method for reconstructing the upper limb, especially for patients with a defect of the distal radius, and report the operative methods, donor vascular consideration, complications, and functional result after this operation.