• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.125-134
• /
• 2023

When the patient with class III malocclusion needs extensive oral rehabilitation due to multiple missing teeth, accurate diagnosis, and careful analysis, such as the patient's occlusal relationship, facial changes, and evaluation of the temporomandibular joint are essential. Orthognathic surgery is often performed for aesthetic improvement, depending on the patient's chief complaint. If it is not possible due to certain circumstances, partial aesthetic improvement can be achieved through minimal elevation of the vertical dimension. As this patient may have unexpected issues, such as temporomandibular joint disorder, oral habits like bruxism, and masticatory muscle tension, it was determined whether the patient could adjust to a reversible temporary removable partial denture. After this, the maxillary implant-supported fixed prostheses and the mandibular fixed prostheses were used to achieve stable posterior support and to partially improve the maxillary anterior esthetics. The patient was satisfied with the results both aesthetically and functionally. The prognosis is expected to be good if regular check-ups are conducted.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.2
• /
• pp.103-116
• /
• 2021

The use of 3-dimensional (3D) printing is becoming more common, and its use is increasing in the orthopedic surgery. Currently, there are four major methods of using 3D printing technology in orthopedic surgery. First, surgical planning simulation using 3D printing model; second, patient-specific surgical instruments; third, production of customized prosthesis using 3D printing technique; fourth, patient-specific prosthesis produced by 3D printing. The areas of orthopedic surgery where 3D printing technology can be used are shoulder joint, spine, hip and pelvis, knee joints, ankle joint, and tumors. Since the diseases and characteristics handled by each area are different, the method of using 3D printing technology is also slightly different in each area. However, using 3D printing technology in all areas can increase the efficiency of surgery, shorten the surgery time, and reduce radiation exposure intraoperatively. 3D printing technology can be of great help in treating patients with particularly complex and difficult orthopedic diseases or fractures. Therefore, the orthopedic surgeon should make the most of the benefits of the 3D printing technology so that patient can be treated effectively.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.1
• /
• pp.18-22
• /
• 2007

Purpose: To provide basic data on anatomy of the ankle joint in adults using magnetic resonance imaging as well as to compare measurements with available data of corresponding dimension in the different sizes of the total ankle replacements design ($HINTEGRA^{(R)}$). Materials and Methods: Magnetic resonance (MR) sagittal and coronal images from one hundred-forty nine were studied. Post traumatic, arthritic, or grossly deformed ankles at any reason were excluded. Lengths, widths of the main parts of this articulation and also the radius of curvature of talar dome were measured in the MR images. Statistical analysis was performed on these measurements. Results: On MR coronal image data, average tibial width was $30.0{\pm}4.1\;mm$ and talar width was $27.0{\pm}3.4\;mm$. On sagittal image date, average anteroposterior length of the distal tibia was $39.0{\pm}4.2\;mm$, average anteroposterior length of the talus was $31.3{\pm}2.8\;mm$, and average sagittal radius of curvature of talar dome was $20.1{\pm}2.9\;mm$. All measurements in male were significantly larger than in female (p<0.01), but a significant difference according to age was not found. Conclusion: Ankle morphometric data define a basis of size, particularly useful in the design of ankle prostheses.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.49-56
• /
• 2019

Generalized severely worn dentition causes occlusal disharmony, esthetic problems, and temporomandibular joint disorders. In order to solve these problems, it is necessary to make a precise analysis of vertical dimension and treatment plans considering it. This case report demonstrates the complete mouth rehabilitation of a 58-year-old male patient with a lot of worn teeth by increasing vertical dimension. Provisional restorations were cemented and after 4 months of evaluation for patient's compliance, permanent prostheses were fabricated. With these treatments, functionally and esthetically satisfactory results were obtained.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.140-145
• /
• 2011

Purpose: Installing a radial head prosthesis has developed into a reliable procedure to replace the native radial head for treating unreconstructible radial head fracture when this is associated with an unstable elbow or forearm. A variety of implants have been developed and these are now commercially available. This article reviews the literature related to the indications, the available implants and the surgical techniques of radial head replacement arthroplasty. Materials and Methods: The main indication for a metallic radial head prosthesis is a comminuted fracture that is not amenable to reconstruction, and particularly if it is associated with complex elbow injuries. Excision of the radial head should be avoided in the presence of combined injured ligaments or interosseous membrane injury. Three different implants are available in Korea, including the bipolar, press fit monopolar and loose fit monopolar radial head prostheses. A primary technical goal of radial head arthroplasty is the insertion of an implant that closely replicates the native radial head. The major pitfall when using a metallic radial head prosthesis is the insertion of a longer implant, which results in overstuffing of the radiocapitellar joint. Results and Conclusion: Satisfactory clinical results can be anticipated when a radial head prosthesis is used for the correct indications and when a systemic approach is undertaken to ensure proper sizing. For the future studies, we need data regarding the long term outcomes and comparison of the various types of prostheses.

• Clinics in Shoulder and Elbow
• /
• v.16 no.2
• /
• pp.170-177
• /
• 2013

Total elbow arthroplasty is still in its infancy compared with other arthroplasties, such as knee or hip arthroplasties. Implant design has been evolving with clinical experiences; however, there are only limited data on the long-term clinical outcome of elbow arthroplasty in the literature. The design of total elbow prostheses can be divided into three categories: linked (constrained or semi-constrained), unlinked (unconstrained), and convertible types. The choice between an unlinked (unconstrained) implant and a linked (semi-constrained) implant depends on joint stability and adequacy of the bone stock. Linked elbow arthroplasty has provided high patient satisfaction, and pain relief thanks to proper patient selection, advancement of implant design, improvement in cement techniques, meticulous surgical technique, and appropriate postoperative rehabilitation. Concerns remain about the use of this implant in young or high-demand patients. This article focuses on the linked (semi-constrained) prostheses, which provides an overview of the current state of linked total elbow arthroplasty.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.157-170
• /
• 2021

Loss of posterior bite support might cause unstable occlusal relationship and when the mandible slides forward in the centric or habitual occlusion, excessive load is applied to the anterior region followed by causing the occlusal plane to collapse or leading to a decrease in occlusal vertical dimension. In addition, disorder of temporomandibular joint function may occur. The inter-dental arch discrepancy causes a mismatch in the vertical and horizontal overlap of the anterior and posterior regions. The deep bite in the anterior region and the scissor bite in the posterior region cause unstable occlusal contact and insufficient occlusal contact area. This report was to rehabilitate a patient with above-mentioned complex problems. Physiologic adaptation to increased vertical dimension and new occlusal plane were evaluated using provisional prostheses, and definitive prostheses was fabricated using cross-mounting technique. Stable occlusion, harmonious teeth overlap and adequate occlusal plane were established, so functionally and aesthetically satisfactory results are obtained.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.96-104
• /
• 2007

Purpose: The authors investigated whether 35 flexible nail-rotating hinge composite reconstructions around knee joint minimize junctional osteolysis of host bone. Material and Method: The reconstructive technique was as follows: 1) en bloc tumor resection, 2) filling of the host bone marrow cavity with multiple Ender nails, 3) assembling the Ender nails and an Endo-Link type total knee component with wire and bone cement. Result: Mean follow-up was 53 months (ranged 30~79). At final follow-up, 29 patients retained a mobile joint. Resection of more than 40% of bone showed a positive relationship with junctional hypertrophy (p=0.028). Eight patients showed nail breakage and eight prostheses were removed due to early or late infection. The cumulative prosthetic survival rate was 33% at 6 year. Average functional score according to the MSTS criteria was 26.8. Conclusion: Mid-term evaluations showed that results were fair. The revision process was straightforward. Junctional hypertrophy observed appears to give some clues as to how to minimize osteolysis at the prosthesis-host junction after modular prosthesis fixation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.780-786
• /
• 2007

Statement of problem. The performance and maintenance of implant-supported prostheses are primarily dependent upon load transmission both at the bone-to-implant interface and within the implant-abutment-prosthesis complex. The design of the interface between components has been shown to have a profound influence on the stability of screw joints. Purpose. The Purpose of this study was to compare the strength and the fatigue resistance of 1-piece and 2-piece abutment connected to oral implant, utilizing an internal conical interface. Material and methods. Twenty $Implatium^{(R)}$ tapered implants were embedded to the top of the fixture in acrylic resin blocks. Ten $Combi^{(R)}$(1-piece) and $Dual^{(R)}$(2-piece) abutments of the same dimension were assembled to the implant, respectively. The assembled units were mounted in a testing machine. A load was applied perpendicular to the long axis of the assemblies and the loading points was at the distance of 7mm from the block surface. Half of 1-piece and 2-piece abutment-implant units were tested for the evaluation of the bending strength, and the others were cyclically loaded for the evaluation of the fatigue resistance until plastic deformation occurred. Nonparametric statistical analysis was performed for the results. Results. Mean plastic and maximum bending moment were $1,900{\pm}18Nmm,\;3,609{\pm}106Nmm$ for the 1-piece abutment, and $1,250{\pm}31Nmm,\;2,688{\pm}166Nmm$ for the 2-piece abutment, respectively. Mean cycles and standard deviation when implant-abutment joint showed a first plastic deformation were $238,610{\pm}44,891$. cycles for the 1-piece abutment and $9,476{\pm}3,541$ cycles for the 2-piece abutment. A 1-piece abutment showed significantly higher value than a 2-piece abutment in the first plastic bending moment (p<.05), maximum bending moment (p<.05) and fatigue strength (p<.05). Conclusion. Both 1-piece and 2-piece conical abutment had high strength and fatigue resistance and this suggests long-term durability without mechanical complication. However, the 1-piece conical abutment was more stable than the 2-piece conical abutment in the strength and the fatigue resistance.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.1
• /
• pp.7-13
• /
• 2014

Purpose: As well as patient survival, the restoration of postoperative function such as ambulation is important in limb salvage operations for treatment of malignant bone tumors involving the proximal femur. The authors analyzed clinical outcomes of limb salvage operations using tumor prostheses for metastatic or primary malignant bone tumors in the proximal femur. Materials and Methods: From February 2005 to January 2014, 20 cases (19 patients) with malignant bone tumor involving the proximal femur with pain or complicated pathologic fracture were treated with segmental resection and limb salvage operations with tumor prostheses. Mean age was 63.1 years (range 35-86). Fourteen patients were male and six ones were female. The mean follow-up period was 20 months (1-94 months). There were 15 cases of metastatic bone tumor, 4 cases of osteosarcoma, and 1 case of multiple myeloma. The primary tumors of the metastatic bone tumors included 4 lung cancers, 3 hepatocellular carcinomas, and 3 renal cell carcinomas. Other primary tumors were breast cancer, thyroid cancer, colon cancer, prostate cancer, and malignant spindle cell tumor, each in 1 case. Modular tumor prostheses were used in all cases; (Kotz's$^{(R)}$ Modular Tumor prosthesis (Howmedica, Rutherford, New Jersey) in 3 cases, MUTARS$^{(R)}$ proximal femur system (Implantcast, Munster, Germany) in 17 cases). Perioperative pain was assessed with Visual Analogue Scales (VAS). Postoperative functional outcome was assessed with Musculoskeletal Tumor Society (MSTS) grading system. Results: Out of 20 cases (19 patients), 11 cases (10 patients) survived at the last follow-up. Average postoperative survival of the 9 deceased patients was 10.1 months (1-38 months). VAS score improved from pre-operative average of 8.40 (5-10) to 1.35 (0-3) after operation. Average postoperative MSTS function score was 19.65 (65.50%, 7-28). The associated complications were 2 local recurrences, 3 hematomas, 3 infections, 2 scrotal swellings, and 1 dislocation. There was no case of periprosthetic fracture or loosening. Conclusion: Limb salvage operation with tumor prosthesis is an appropriate treatment for early pain reduction and functional restoration in malignant bone tumors in the proximal femur with pain an/or complicated pathologic fractures.