Background: We investigated the risk factors for the recurrence of anterior shoulder instability after arthroscopic surgery with suture anchors and the clinical outcomes after reoperation. Methods: A total of 281 patients (February 2001 to December 2012) were enrolled into our study, and postoperative subluxation and dislocation were considered as recurrence of the condition. We analyzed radiologic results and functional outcome including the American Shoulder and Elbow Surgeons Evaluation Form, the Korean Shoulder Society Score, and the Rowe scores. Results: Of the 281 patients, instability recurred in 51 patients (18.1%). Sixteen out of 51 patients (31.4%) received a reoperation. In terms of the functional outcome, we found that the intact group, comprising patients without recurrence, had a significantly better functional outcome than those in the recurrent group. The size of glenoid defect at the time of initial surgery significantly differed between intact and recurrent group (p<0.05). We found that the number of dislocations, the time from the initial presentation of symptoms to surgery, and the number of anchor points significantly differed between initial operation and revision group (p<0.05). The functional outcome after revision surgery was comparable to intact group after initial operation. Conclusions: Eighteen percent of recurrence occurred after arthroscopic instability surgery, and 5.6% received reoperation surgery. Risk factors for recurrence was the initial size of glenoid defect. In cases of revision surgery, good clinical outcomes could be achieved using additional suture anchor.
Proceedings of the Korean Geotechical Society Conference
/
1998.05a
/
pp.3-34
/
1998
The stability condition of rock slopes is greatly affected by the geometry and strength parameters of discontinuities in the rock masses. Rock slopes Involving movement of rock blocks on discontinuities are failed by one or combination of the three basic failure modes-plane, wedge, and toppling. In rock mechanics, practically all the parameters such as the joint set characteristics, the rock strength properties, and the loading conditions are always subject to a degree of uncertainty. Therefore, a reasonable assessment of the rock slope stability has to include the excavation of the multi-failure modes, the consideration of uncertainties of discontinuity characteristics, and the decision on stabilization measures with favorable cost conditions. This study was performed to provide a new numerical model of the deterministic analysis, reliability analysis, and reliability-based optimization for rock slope stability. The sensitivity analysis was carried out to verify proposed method and developed program; the parameters needed for sensitivity analysis are design variables, the variability of discontinuity properties (orientation and strength of discontinuities), the loading conditions, and rock slope geometry properties. The design variables to be optimized by the reliability-based optimization include the cutting angle, the support pressure, and the slope direction. The variability in orientations and friction angle of discontinuities, which can not be considered in the deterministic analysis, has a greatly influenced on the rock slope stability. The stability of rock slopes considering three basic failure modes is more influenced by the selection of slope direction than any other design variables. When either plane or wedge failure is dominant, the support system is more useful than the excavation as a stabilization method. However, the excavation method is more suitable when toppling failure is dominant. The case study shows that the developed reliability-based optimization model can reasonably assess the stability of rock slopes and reduce the construction cost.
In wireless network, the amount of video streaming packet information in receiver replay buffer can be varied according tothe wireless network condition. By the effect, unforeseeable delay and jitter are generated and then busty video traffics can be made. If the amount of buffer information coming in receiver replay buffer is larger than the amount of a specific buffer information, buffer overflow is generated. Such a problem makes the image skip effect and packet loss, and then causes the quality degradation and replay discontinuity of the video streaming service in destination receiver. To solve the buffer overflow problem, this paper applies the token bucket for the busty traffic to the receiver terminal and analyzes the effect of the token bucket. The simulation result using NS-2 and JSVM shows that the proposed scheme with the token bucket has significantly better performance than the conventional scheme without the token bucket in terms of overflow generation number, packet loss rate and PSNR.
The analysis and design of steel frames are usually carried out under the assumption that the connections of beam-to-column are either fully rigid or ideally pinned. However the connections actually show semi-rigid behavior in many cases. The authors investigated the structural behavior of simi-rigid connection with reformed T-stub by using of SM490 steel. The objective of the study is to investigate the structural behavior of the beam-to-column semi-rigid connection with reformed T-stub, which is made of SS400 steel. The beam-to-column connections by using reformed T-stubs were tested under monotonic loading and cyclic loading condition. The possibility of application of semi-rigid connections with reformed T-stubs was ascertained from test results.
Journal of Korean Society for Geospatial Information Science
/
v.18
no.4
/
pp.119-129
/
2010
The joint use of remotely sensed data and field measurements has been widely used to estimate aboveground carbon stock in many countries. Recently, Korea Forest Research Institute has developed new carbon emission factors for kind of tree, thus more accurate estimate is possible. In this study, the aboveground carbon stock of Danyang area in South Korea was estimated using k-Nearest Neighbor(kNN) algorithm with the 5th National Forest Inventory(NFI) data. Considering the spectral response of forested area under the climate condition in Korea peninsular which has 4 distinct seasons, Landsat TM seasonal satellite images were collected. As a result, the estimated total carbon stock of Danyang area was ranged from 3542768.49tonC to 3329037.51tonC but seasonal trends were not found.
Journal of the Korean Society of Hazard Mitigation
/
v.6
no.4
s.23
/
pp.1-6
/
2006
In terms of the speed-up of the conventional line, the research for a improved turnout was carried out continually around world. A turnout is known that it is the most unstable equipment structurally in the rail system. So, the turnout is needed more stable structure. An accurate assembly of turnout affects traveling qualify of turnout area and running safety. Therefore, a turnout which is pre-assembled at a factory by using the split PC sleeper is transported to construction site recently in advanced countries. In this paper, the performance measurements which estimate the safety of the split PC sleepers which are adopted for the first time to improve performance of turnout are implemented indoors. The split PC sleeper is one of components of the improved turnout. The test is considered of the worst ballast condition under the maintenance work as like STT(Swithc Tie Tamper) or MTT(Multiple Tie Tamper). These experiments results indicate that structural safety for the expansion joint of the split PC sleepers.
Proceedings of the International Microelectronics And Packaging Society Conference
/
2001.04a
/
pp.35-43
/
2001
Flip chip assembly on organic substrates using ACAs have received much attentions due to many advantages such as easier processing, good electrical performance, lower cost, and low temperature processing compatible with organic substrates. ACAs are generally composed of epoxy polymer resin and small amount of conductive fillers (less than 10 wt.%). As a result, ACAs have almost the same CTE values as an epoxy material itself which are higher than conventional underfill materials which contains lots of fillers. Therefore, it is necessary to lower the CTE value of ACAs to obtain more reliable flip chip assembly on organic substrates using ACAs. To modify the ACA composite materials with some amount of conductive fillers, non-conductive fillers were incorporated into ACAs. In this paper, we investigated the effect of fillers on the thermo-mechanical properties of modified ACA composite materials and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers. Microwave model and high-frequency measurement of the ACF flip-chip interconnection was investigated using a microwave network analysis. ACF flip chip interconnection has only below 0.1nH, and very stable up to 13 GHz. Over the 13 GHz, there was significant loss because of epoxy capacitance of ACF. However, the addition of $SiO_2filler$ to the ACF lowered the dielectric constant of the ACF materials resulting in an increase of resonance frequency up to 15 GHz. Our results indicate that the electrical performance of ACF combined with electroless Wi/Au bump interconnection is comparable to that of solder joint.
Journal of Korean Academy of Fundamentals of Nursing
/
v.9
no.2
/
pp.180-189
/
2002
Purpose : This study focused on affirming of the effects of Dan-jun breathing exercise experienced by women in midlife. Method: The data were collected via direct interview from 20 participants, who participated in a Dan-Jun exercise program during three months. Collected data were analyzed by content analysis. Result : 1. As for the health problems of women in midlife before the Dan-jun exercise program, 93 items were extracted in the content analysis These items were categorized into 59 attributes and 15 higher attributes. 1) Of the 59 attributes of health problems, shoulder pain (30%) was the most dominant. 2) The 15 higher attributes consisted for the physical domain of, weakness, pain, joint stiffness, sexual problem, sleep disorder, gastro-intestinal disorder. menstrual irregularity. circulatory disorder, respiratory disorder. constipation, urinary incontinence, and for the psychological domain, anger, emptiness, depression, and anxiety. 2. As for the effects experienced by women in midlife after the Dan-jun exercise program, 169 items were extracted in the content analysis. These items were categorized into 85 attributes and 14 higher attributes. 1) Of 85 attributes, lightening of physical condition (55%) was the most dominant. 2) The higher attributes consisted in physical domain of, recovery of vigor, pain relief, menstrual regularity and improvements in flexibility. sexual problem, sleep disorder, gastro-intestinal disorder, circulatory disorder constipation, respiratory disorder and urinary incontinence, and for the psychological domain, relaxation, cultured mind and self-confidence. Conclusions : Dan-jun breathing exercise program for three months showed positive effects on physical and psychological health in women in midlife. In this context, it can be also considered as a significant nursing intervention for maintenance and promotion of the health of these women.
Park, Jun-sung;Kim, Woo-young;Paek, Seung-tae;Lee, Seung-deok;Kim, Kap-sung
Journal of Acupuncture Research
/
v.21
no.6
/
pp.259-267
/
2004
De Quervain's disease is caused by stenosing tenosynovitis of the first dorsal compartment of the wrist. The first dorsal compartment at the wrist includes the tendons of the abductor pollicis longus (APL) and the extensor pollicis brevis (EPB). Patients with De Quervain's usually report pain at the dorsolateral aspect of the wrist with referral of pain toward the thumb and/or lateral forearm. This condition responds well to nonsurgical treatment. Objective : The aim of this study was to find out the therapeutic effect of the Cervus elaphus Herbal-acupuncture in the treatment of patients with De Quervain's Disease. Design : A prospective study of Cervus elaphus Herbal-acupuncture was conducted. Setting : The study was conducted in the Kang-nam Oriental Hosp. of Dong-Guk University. Patients : The study comprised 4 patients with De Quervain's Disease. Methods : We investigated 4 cases patients the De Quervain's Disease. We evaluated wrist function that before and after Cervus elaphus Herbal-acupuncture treatment by VAS score, tenderness and Finkelstein test. the treatment is operated every other day. Results : Pain reduction(VAS) was found out in the case treated with Cervus elaphus Herbal-acupuncture. Conclusions : Clinical results show that Cervus elaphus Herbal-acupuncture has a good analgesic effect in De Quervain's Disease.
Journal of the Institute of Electronics Engineers of Korea TC
/
v.46
no.2
/
pp.53-59
/
2009
In multi-user MIMO systems, a base station transmits multiple data to multi-user simultaneously in order to improve performance and bandwidth efficiency. When the base station transmits multiple data to multi-user simultaneously, multi-user interference occurs severely. In this paper, we define a post-processing leakage as the total power leaked from desired user to all other users after combining at the output of each user. Using concept of the post-processing leakage, we also define a performance metric, the so called signal-to-post-processing-leakage-plus-noise ratio (SPPLNR). Assuming that the receiver is the minimum mean square error (MMSE) receiver, we propose an iterative SPPLNR-based beamforming that determines beamforming vectors and combining vectors by using an iterative method. The proposed scheme does not impose a condition on the relation between the number of transmit antennas for the base station and the number of receive antennas for users. Simulation results show that the proposed scheme outperforms a beamforming scheme perfectly eliminating the multi-user interference when channel estimation error exists.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.