• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.228-236
• /
• 2004

Two varieties of alfalfa (Medicago sativa L cv. Pioneer and Beaver) and timothy (Phleum pratense L cv. Climax and Joliette), grown at different locations in Saskatchewan (Canada), were cut at three stages [1=one week before commercial cut (early bud for alfalfa; joint for timothy); 2=at commercial cut (late bud for alfalfa; pre-bloom head for timothy); 3=one week after commercial cut (early bloom for alfalfa; full head for timothy)]. The energy values of forages were determined using three approaches, including chemical (NRC 2001 formula) and biological approaches (standard in vitro and in situ assay). The objectives of this study were to determine the effects of forage variety and stage of maturity on energy values under the climate conditions of western Canada, and to investigate relationship between chemical (NRC 2001 formula) approach and biological approaches (in vitro and in situ assay) on prediction of energy values. The results showed that, in general, forage species (alfalfa vs. timothy) and cutting stage had profound impacts, but the varieties within each species (Pioneer vs. Beaver in alfalfa; Climax vs. Joliette in timothy) had minimal effects on energy values. As forage maturity increased, the energy contents behaved in a quadratic fashion, increasing at stage 2 and then significantly decreasing at stage 3. However, the prediction methods-chemical approach (NRC 2001 formula) and biological approaches (in vitro and in situ assay) had great influences on energy values. The highest predicted energy values were found by using the in situ approach, the lowest prediction value by using the NRC 2001 formula, and the intermediate values by the in vitro approach. The in situ results may be most accurate because it is closest to simulate animal condition. The energy values measured by biological approaches are not predictable by the chemical approach in this study, indicating that a refinement is needed in accurately predicting energy values.

• Archives of Reconstructive Microsurgery
• /
• v.1 no.1
• /
• pp.9-16
• /
• 1992

Volkmann's ischemic contracture is the end result of an untreated, delayed or Inadequately decompressed compartment syndrome in which muscle ischemia and necrosis have occurred. Once the muscle necrosis have happened, the involved muscle undergo permanent change into fibrous tissue. So secondary shortening and distal joint contracture will be a final outcome, which results in marked functional impairment of hand and forearm. Even though several procedures, such as muscle sliding operation has been attempted, overall results were far from satisfaction, compare to healthy opposite hand. The management of these unfavorable condition of the forearm and hand was regarded as one of challenging area in orthopedics. Recently new approach, using microsurgical technique which transfers functioning muscle unit, has been developed and its result was much better than any other methods in the aspect of an active motion. Among these musculocutaneous free flaps, gracilis has obtained special reputation due to its easiness to handle such as elevation of flap and reliable neurovascular pedicle. Other advantages are flexibility of flap size to adjust variable size of the defect in the forearm and minor morbidity of the donor site. Authors have performed 7 cases of functioning gracilis musulocutaneous free flap transplantation for the functional loss of forearm and hand due to Volkmann's ischemic contracture or muscle and skin defect due to severe trauma since November, 1981 till May, 1991. The results in most cases were satisfactory and acceptable.

• Clinics in Shoulder and Elbow
• /
• v.20 no.2
• /
• pp.84-89
• /
• 2017

Background: Common and effective treatments for calcific tendinitis involve needling procedures. However, it has been widespread practice to refer patients with calcific tendinitis, which is a predominantly orthopedic condition, to radiology department. The purpose of this study was to compare clinical and radiological outcomes after ultrasound-guided needling for calcific tendinitis between the orthopedics and radiology department. Methods: Seventy-seven shoulders (Group 1) and 38 shoulders (Group 2) treated in the radiology and orthopedic department, respectively. A fellowship-trained orthopedic surgeon and a musculoskeletal radiologist each performed the procedure of ultrasound-guided needle decompression with subacromial steroid injection. Clinical outcomes was evaluated using the visual analogue scale for pain (pVAS) and the American Shoulder and Elbow Surgeons (ASES) shoulder score before treatment and at each follow-up. The pre- and postneedling size and shape of the calcific deposits were compared between the two groups. Results: We analyzed a total of 56 shoulders for Group 1 and 32 shoulders for Group 2. The mean age and sex ratio of the patients no significantly different. We found that the mean decrease in the diameter of calcification between pre- and post-needling was 9.0 mm for Group 1 and 13.1 mm for Group 2; the difference was significantly larger in Group 2 than in Group 1. Both groups showed improved pVAS and ASES scores after needling but the extent of these improvements did not differ with the type of operator. Conclusions: Needling decompression performed by orthopedic surgeons could a viable option for the treatment of calcific tendinitis.

• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.225-234
• /
• 2011

In this study, an in situ heater test for investigating the thermo-mechanical behavior related to heat flow was carried out. It was the first in situ heater test in Korea. For the test, an adequate design of heater, observation sensors, and data logging system was developed and installed with a consideration of the site condition and the test purposes. It was possible to observe that steep joints are overwhelmingly developed in the test area from a joint survey. The major rock and rock mass properties at the test site could be determined from the thermal and mechanical laboratory tests using the rock cores from the site. From the measured rock temperature distribution, it was possible to observe the influence of the rock joints and the heat flow through tunnel wall. When the heater temperature was maintained as $90^{\circ}C$, the rock temperature at 0.3 m from the heater hole was increased up to $40^{\circ}C$.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.5
• /
• pp.341-352
• /
• 2017

Well designed group bolted connections can exhibit excellent ductile behavior through the bearing mechanism until the occurrence of shear rupture in the bolt or in the connecting plate. This excellent ductility can be utilized in favor of economical connection design. In this study, comprehensive tests on single-bolt bearing connections were conducted and analyzed considering bearing boundary conditions. The primary objective was to propose a generalized bearing strength and load-deformation relationship that can be used for designing group-bolted connections. To this end, new bearing strength formula, deformation limits as well as new load-deformation relationship were first proposed. Especially the proposed load-deformation relationship can reflect the stiffness, strength, and geometrical boundary conditions of the joint. The proposed formula and relationship are validated based on test results.

• Korean Journal of Childcare and Education
• /
• v.9 no.4
• /
• pp.235-257
• /
• 2013

This study intended to deeply understand teachers' experiences about their self-supervision at after-school nurseries through many different stories. This study composed field texts based on the data collected through face-to-face talks with participants, their journals, and e-mails and phone conversations given and taken with participants for a total of 4 months from September to the end of December, 2012. The teachers all had ten years teaching experience, and worked as after-school nursery teachers in S-gu, S-si. The study found many things such as experiencing the joy of learning things that were unknown through self-supervision, hardship involved in self-supervision, co-workers dedicated to joint learning, and time and spaced used to better understand children. The study figured out that the meaning of self-supervision lay in the pursuit of learning and bright eyes(seeing what was not seen before), despite the difficult condition to self-supervise, the after-school nursery teachers unceasing passion for self-supervision brings happiness within oneself. As a result, this study discussed the implications which the experience of after-school nursery teachers who found a happy meaning of life through self-supervision in spite of the actual difficult conditions offered to after-school nursery teachers.

• CELLMED
• /
• v.2 no.1
• /
• pp.6.1-6.4
• /
• 2012

The traumatic removal of the mandibular third molar may promote post chirurgic consequences such as orofacial pain and limited mandibular movements. The aim of this case report is to describe the use of an anterior bite plane and complementary therapies (low level laser therapy and acupuncture) to treat the muscular dysfunction and the painful symptoms. A 33 year-old male patient who had a severe malocclusion and signs and symptoms of temporomandibular dysfunction was submitted to an initial clinical examination: electromyography of the masticatory muscles and IRM of the temporomandibular joint. After treatments, the results showed reduced pain symptoms and an increase of the mandibular movements and adequated electromiographic activities. The authors concluded that the combination therapies may be used as an alternative treatment because it satisfied the functional requirements of the patient and provided an asymptomatic clinical condition.

• Journal of the Korean association of regional geographers
• /
• v.8 no.4
• /
• pp.468-479
• /
• 2002

This study attempts to characterize Taebaek mountainous region as a natural unit, relating to morphoclimatic milieu and landform development patterns of the mountains of each lithologic type. In the case of granitic mountains of Nothern parts of this region, the slopes presents more or less steep or irregular profile because of abundant microforms of exposed bedrocks and blocks. The development of such landscape is essentially due to differential weathering, associated with difference of joint density. In the case of gneissic mountains, the slopes are well regularized straight steep ones, due not only to generalized superficial weathering but also to massmovement of weathered materials. In the Middle parts of this region, especially in Taegwallyong area, with frequent alternations both of freezing-thawing and of snow accumulation-melting, the roles played by cryo-nival processes proved to be important in weathering of granite as well as in morpho-pedogenesis. In this area, weathered mantle, developed by cryogenic activity under humid condition of nival environment, covered almost all over the slopes. Although Southern parts of this region consist of limestone, on the mountainous volume, distribution of Karst forms are limited while predominate none karst forms such as cockpit type peaks, V-shaped type valleys dissecting steep slopes covered with thin deposits in thickness containing rock debris.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.46-54
• /
• 2014

Direct shear tests have been initiated to understand the characteristics of joints which crucially affect the stability of rock mass. In this research, numerical approach in direct shear tests has been initiated using 3DEC on the basis of 3D distinct element method. Normal loads were altered in four different levels on artificial joint tests depending on the sawtooth angle and strengths on constant normal stress conditions, measuring the peak shear strength according to the direct shear tests under laboratory condition. Also results obtained from mechanical properties through laboratory test were used to perform numerical modeling, and shear strength obtained from the modeling was used to compare with laboratory direct shear test. As a result numerical analysis from distinct element method can simulate well on the shear behavior of rockmass.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.1
• /
• pp.65-73
• /
• 2012

The purpose of this study was to identify the saddle to pedal length contributing to successful performance in kayak using a kayak ergometer. Ten male elite kayak players participated in this study. players were tested on the kayak ergometer which was varied saddle to pedal length by the knee flexion angle(90deg; 120deg; 150deg) to measure stroke frequency, paddling amplitude, joint angle, RoM and angular velocity, foot pressure and force, iEMG using the 3D motion system, foot pressure system and EMG wireless system. At a results, rowing at 120deg on knee flexion angle showed higher stroke frequency and paddling amplitude than other knee flexion angles. RoM at upper extremity showed not significant difference between knee flexion angles. But there were significant differences in thorax and pelvis rotation RoM, knee flexion-extension RoM in each condition. In addition, foot pressure, force and iEMG were significantly different in knee flexion angles. Study showed that changed of saddle to pedal length affected rowing performance kinds of stroke frequency, paddling amplitude. The most important thing, increased range of motion in pelvic and thorax has occurred by force that generated foot-bar to seat. Not only that, but it seems to be attributed to a technical adaptation developed to maximum rowing performance.