• 터널과지하공간
• /
• 제13권4호
• /
• pp.294-303
• /
• 2003

터널이나 사면과 같은 암반 구조물의 거동은 불연속면에 의해 지배적인 영향을 받는다. 따라서 암반내 존재하는 불연속면 자료의 조사 및 분석은 암반구조물 설계 및 시공에 있어서 상당히 큰 중요성을 가진다. 이러한 불연속면의 조사 및 분석 작업 중에서 반드시 거처야 할 작업 중 하나가 절리군을 분별하는 것이다. 기존의 절리군 분석 작업은 대부분 시각적인 방법으로 행해지고 있다. 이 경우 분석자의 주관에 따라 차이를 보일 수 있으며 절리의 방향 정보 외의 다른 추가적인 정보들은 사용하기 힘든 단점이 있다. 본 연구에서는 절리군 분석을 돕기 위하여 퍼지 클러스터링 기법을 이용한 프로그램을 개발하였으며 이를 두 가지 형태의 절리 자료에 대한 절리군 분석에 적용하였다. 적용 결과 퍼지 클러스터링 기법이 다수의 절리 자료에 대한 절리군 분석, 평균방향 및 밀집도 추정에 효과적이며 타당한 방법임을 확인하였다.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.57-67
• /
• 2005

The purpose of this study was to analyze the kinetic factors of the golf driver swing using the Inverse Dynamics function. For this purpose, joint force were calculated. In order to test the possibility of Inverse Dynamics function(motion-dependent interaction), a triple segmental system was set for wrist, left shoulder and lumbar and joint force working on the anatomical joint region was estimated. For this study, 7 professional golfers were sampled, and then, their driver swings were recorded with two high-speed digital video cameras (180 frames/sec.) to be synthesized into 3-dimensional images and coordinated. Then, Eular's equation was used to produce some kinematic data, which were used to calculate joint force and torque with Newton's function. All data were calculated using LabVIEW 6.1 graphic program. The results of this study can be summarized as follows; It was found that the joint force was generated on wrist, shoulder and lumbar joints in the direction of the target, and that the joint force was stronger in the direction of target immediately before impact. The joint force was generated towards the target to activate the nodes, and then, it was generated in the reverse direction to increase the speed during impact.

• 가정과삶의질연구
• /
• 제7권2호
• /
• pp.163-178
• /
• 1989

This study was mainly concerned providing a basic of data for the more reasonable home management. The purpose study was to investigate the relationship of husbands and wives self-actualization and degree of joint decision-making. For the purpose of this study 500 questionaire were distributed to the marital in seoul. The 412 data were analized by Frequency, Percentage, T-test, ANOVA, Scheffe-test. The major findings of this study were as follows: 1) Over one and half of husbands and wives are try to be self-actualized. 2) The tendency of the husbands and wives decision-making was joint decision-making. 3) The important influential variables on the husbands and wives self-actualization husbands were age, life-cycle, job employment motivation. And wives were life-cycle, education, income, job, employment motivation. 4) The important influential variables on the joint decision-making were age, number of child, life-cycle. 5) A marital joint decision-making level differs significantly, according to the degree of husbands and wives self-actualization. The higher level of husbands and wives self-actualization, the higher degree of marital joint decision-making. The result of this study implies that a marital joint-making necessary in order to carry on happy home management and the reasonable home administration.

• 수산해양교육연구
• /
• 제26권3호
• /
• pp.535-542
• /
• 2014

The purpose of this study was to analyze the movements of the lower extremity joints during a taekwondo kick motion called 'Juchumseogi hu Apkkoaseogi yeopchagi', which was administered to players to improve their balance, stability, and range of motion for the prevention of injuries. Eight professional players and amateur players were recruited as the subjects. Kinematic data were collected by four real-time infrared cameras. The hip joint, knee joint, and ankle joint angles were measured using instruments. During the 'Juchumseogi hu Apkkoaseogi yeopchagi' kick motion, there were small and inconsistent effects on each joint. This study processed the data using the Windows SPSS Ver. 18.0 to get an independent t-test, with the setting, p< .05. Results indicated that hip joint, knee joint, and ankle joint angles were almost significantly different between professional and amateur player during 'Juchumseogi hu apgeule Apkkoaseogi' kick motion.

• 한국학교ㆍ지역보건교육학회지
• /
• 제15권3호
• /
• pp.31-41
• /
• 2014

Objective: The purpose of this study was to obtain the basic data for quality of life and improve the oral health through relevance of academic stress with academic high school girl temporomandibular joint syndrome. Methods: Data was collected from the students of two academic girl high school in Daegu, using questionnaire. They were the students of the 1st, 2nd grade, in total 311 student. The analysis was made using ${\chi}^2-test$, (one way ANOVA), and Pearson's Correlation, multiple linear regression analysis. These were conducted using spss 14.0 version Results: High school girl had at least one temporomandibular joint syndrome was 70.4%. In subjective of temporomandibular joint syndrome academic stress for grade stress scores were highest 52.3, study stress 35.0 all the depth of a lesson stress 45.5, there was a statistically significant(p<0.001). effect on subjective of temporomandibular joint syndrome influence the bad oral habit(${\beta}=0.325$) were found to have subjective of joint syndrome showed a statistically significant increase in the higher significant positive(p<0.001).

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.19-36
• /
• 2023

An experimental study of eleven PVC-FRP Confined Concrete (PFCC) column-Reinforced Concrete (RC) beam joints reinforced with Core Steel Tube (CST) under axial compression is carried out. All specimens are designed in accordance with the principle of "weak column and strong joint". The influences of FRP strips spacing, length and steel ratio of CST, height and stirrup ratio of joint on mechanical behavior are investigated. As the design anticipated, all specimens are destroyed by column failure. The failure mode of PFCC column-RC beam joint reinforced with CST is the yielding of longitudinal steel bars, CST and stirrups of column as well as the fracture of FRP strips and PVC tube. The ultimate bearing capacity decreases as FRP strips spacing or joint height increases. The effects of other three studied parameters on ultimate bearing capacity are not obvious. The strain development rules of longitudinal steel bars, PVC tube, FRP strips, column stirrups and CST are revealed. The effects of various studied parameters on stiffness are also examined. Additionally, an influence coefficient of joint height is introduced based on the regression analysis of test data, a theoretical formula for predicting bearing capacity is proposed and it agrees well with test data.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.91-99
• /
• 2018

암반사면을 안전하고 효과적으로 해석하기 위해서 암반의 역학적 특성을 면밀하게 조사해야 한다. 하지만 클리노미터를 사용한 절리조사의 한계점으로 인해 이를 보완한 새로운 측정법의 연구가 필요하다. 본 연구에서는 절리방향의 특성을 분석하기 위해 절리의 방향성을 현장에 적용할 수 있는 절리조사 측정장비를 개발하였다. 개발된 측정장비는 해석 소프트웨어와 하드웨어로 구분된다. 하드웨어는 암반 절리 방향성을 측정하는 측정모듈, 측정자료를 전송하는 전송모듈로 구성되었다. 소프트웨어는 측정모듈을 통해 얻은 데이터로부터 절리의 방향성을 분석하기 위해 개발하였으며 Drone Joint Orientation Survey Measurement로 명명하였다. 개발된 측정장비는 접근이 어려운 지역 등 조사자가 측정할 수 없는 경우에 현장적용성이 양호하며 절리의 방향성에 대한 실내시험결과를 효과적으로 분석할 수 있었다.

• 아동학회지
• /
• 제30권5호
• /
• pp.155-165
• /
• 2009

This study was conducted to identify relationships between toddler-teacher joint attention and toddlers' vocabularies. Toddlers' vocabularies were assessed by the MacArthur Communicative Development Inventory-Korean (MCDI-K) modified by Kim (2006); joint attention episodes were observed by classification categories for engagement condition (Bakeman & Adamson, 1984). Data were analyzed by means, t-test and Pearson's correlations. Results were that : (1) receptive vocabulary of toddlers was about 1.1 times as high as their expressive vocabulary. (2) Coordinated joint attention was observed most frequently, followed by supported joint attention; coordinated joint attention was closely related to support joint attention. (3) The relationship between toddler-teacher joint attention and toddlers' vocabularies were significant in a positive direction.

• 산업공학
• /
• 제16권1호
• /
• pp.85-93
• /
• 2003

The purposes of this study are to investigate perceived discomfort for static joint motions, and to propose rankings for the joint motions based on the perceived discomfort. The perceived discomfort was measured through an experiment using the free modulus method of the magnitude estimation, in which ten healthy college-age female students participated. The results showed that joints, joint motions and their levels significantly affected the perceived discomfort at $\alpha$=0.01, and that the interaction of joints and joint motion levels was also significant. Based on the experimental results, three rankings were proposed by joint and joint motions, by joints and by joint motions, which were very different from the existing ones. Especially, the proposed rankings were different from the males' published before in their order and magnitude. These rankings can be used as a valuable tool for better understanding potentially adverse effects of poor working postures in industrial sites, and as basic data for developing the postural classification scheme.

• The Journal of Korean Physical Therapy
• /
• 제25권2호
• /
• pp.117-125
• /
• 2013

Purpose: The purpose of this study was to investigate changes in movement strategies of lower limb joints depending on the type of heel during sit-to-stand. Methods: Twenty healthy females participated in this study. All subjects performed sit-to-stand three times each with three different types of heels - bare feet, 9 cm high-heeled shoes, and unstable shoes. Trails were conducted in random order. Three-dimensional motion analysis systems were used for collection and analysis of the kinematic data of lower limb movements. Results: Results of this study showed kinematic differences in pelvis, hip joints, knee joints, and ankle joints during sit-to-stand based on the type of heels. At the initial sit-to-stand, hip joint flexion, knee joint flexion, ankle joint flexion, and ankle joint inversion showed significant differences. The maximal angles of hip joint flexion, hip joint adduction, knee joint flexion, ankle joint flexion, and ankle joint inversion were significantly different, while hip joint adduction, pelvic forward tilt, hip joint rotation, knee joint flexion, ankle joint flexion, and ankle joint inversion differed significantly during the terminal of sit-to-stand. Conclusion: Therefore, the type of heel played an important role in selection of lower limb movements during sit-to-stand which were essential parts of daily life movements.