• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.111-115
• /
• 2009

As shown in the accident analysis from 2007, it has been found that causes of accidents on large-scale projects are different from those found in general construction projects. A 300-question survey regarding systematic and practical aspects of safety problems at construction sites was distributed to ten (10) different companies. Participants were to respond subjectively, so that the results could be used to assemble the first formal questionnaire survey. They were collected and compiled by an advisory committee for this study. The resulting surveys were then sent to the division chiefs of the top 100 construction companies in Korea, in order to improve the response rate. The Department of Safety & Health Direction, and the :Ministry of Labor, ROK sent the same sheets to medium and small construction companies that placed within 101-200th of all Korea construction companies. The above safety engineers were classified into four (4) levels, from 1st to 4th, followed by the project dollar amount and risk level. Formulae were developed to assign safety engineers to construction sites by engineer level, the project dollar amount, and the project risk level. Conclusions are summarized as follows: 1) Reviewing the assignment system of experienced safety engineers to large scaled projects - The more experienced the engineers assigned to a project, the higher the level of accident prevention. 2) Enforcing the assignment of advanced level safety engineers to large-scaled sites - At least one advanced-level safety engineer should be assigned to construction sites with projects valued at $15million USD (15,000,000,000). 3) For assigning safety engineers by risk level - Twenty models have been developed to calculate the number of safety engineers to be assigned by risk level. In the future, risk level for each job should be established by the government (as is now the practice in Germany).

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.145-153
• /
• 2011

In this paper, we propose a CMS(Career Management System) based on the Android Platform, which is able to manage the result of MBTI, an aptitude test and English skills such as TOEIC, conversation, writing, etc. and to deal with the performance of the on-the-job practice, internship, project participation, graduation exhibition, contest exhibition, etc. during the period of attendance at school, This system is divided into the server module and the client one. First, the server module is used to build up the web site of the CMS that can serve to save the data related to each student's career. Second, the client module is to develop the application based on the Android Platform. This application can easily access the career-related information and always function as maintaining and managing the new data. If we make good use of the CMS proposed in this study, the relevant departments and bureaus in colleges and universities can activate the service capacity and also enhance the employment competitiveness by adding value to the students.

• Korean Institute of Interior Design Journal
• /
• v.13 no.5
• /
• pp.82-89
• /
• 2004

Today, people are bombarded with information, high-technology and multimedia. With that in mind, museum can no longer attract visitor with traditional concept, so it must find some solution or stimulation to attract their attention back. New museum is becoming a experimental space for new culture, new education, and most of all a place to fulfill one's satisfaction of life. Over the past centuries, Guggenheim Foundation has done a great job in providing place for art and place to get emotional stimulation. Out of all of their museums, Frank L. Wright's Solomon R. Guggenheim in New York and frank O. Gehry's Guggenheim Museum in Bilbao had most unique character yet share similar feature to be recognized as the architectural landmark of the 20th & 21st century Although there are close to 50 years of gap between two museums, their unique, attractive, site-specific, emotional value comes from the two most innovative architect of the past and present century. For Wright the Guggenheim was his last project but it had one of the greatest impact on his career and for Gehry the museum gave him confidence that anything is possible. This study will focus on the spatial organization as well as the architectural formation of both museum to compare and analyze. The goal of the research is to give fundamental data which will reveal emotional elements as well as concepts from each work. The content of this research will mainly focused on their architectural philosophy and it will reveal their concept on human emotion as well as the characteristics of the spatial organization. The result of the study will be a valuable reference for people designing art & cultural facilities in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.4
• /
• pp.79-87
• /
• 2011

Cost control is an exceedingly fundamental and important construction business function. Even though enormous research efforts have been exerted in this area, there has been no comprehensive and quantitative study exploring detailed cost control practice of construction companies in terms of practical patterns and trends. This paper identified the variables for practical cost control process first. A survey questionnaire was developed and used in order to collect data from Korean general contractors. Survey results analyzing responses from 45 companies show that engineering aspects of cost management has recently been strongly stressed in the construction industry. Applying various types of progress measurement method are getting popular, and the level of details in collecting job site cost data are prevalent. Cost forecasting are performed more frequently. These trends indicates the recent efforts by Korean general contractors to achieve competitive advantages in the globalized market.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.77-85
• /
• 2018

PURPOSES : The purpose of this study was to develop an urgent road-repair system and perform a field applicability test, as well as discover the optimum mix design for machine applications compared to the optimum mix design for lab applications. METHODS : According to reviews of the patent and developed equipment, self-propelled and mix-in-place equipment types are suitable for urgent pavement repair, e.g., potholes and cracks. The machine-application mix design was revised based on the optimum lab-test mix design, and the field application of a spray-injection system was performed on the job site. The mixture from the machine application and lab application was subjected to a wet-track abrasion test and a wheel-tracking test to calibrate the machine application. RESULTS and CONCLUSIONS : This study showed that the binder content could differ for the lab application and the machine application in the same setting. Based on the wet-track abrasion test result, the binder contents of the machine application exceeded the binder contents of the lab application by 1-1.5% on the same setting value. Moreover, the maximum dynamic stability value for the machine application showed 1% lower binder contents than the maximum lab-application value. Collectively, the results of the two different tests showed that the different sizes and operating methods of the machine and lab applications could affect the mix designs. Further studies will be performed to verify the bonding strength and monitor the field application.

• International Journal of Highway Engineering
• /
• v.4 no.3 s.13
• /
• pp.15-23
• /
• 2002

The waterproofing system's performance is known to show a determing by complex interaction of material factors, design details, and the quality of construction, and the waterproofing integrity of waterproofing membranes is determined by the bond to the deck and the amount of damage to the waterproofing membrane. In this research, the basic properties of waterproofing membranes on market and the tensile adhesive chracteristics of waterproofing systems of concrete bridge deck have also been investigated in the view of the damages frequently reported from job site. For the tensile adhesive strength of sheet waterproofing membranes, the results after asphalt concrete paving tends to increase more than before those. The results of the liquid waterproofing membranes are upside-down, and the more concrete has strength, the more strength of tensile adhesive increase. The ambient temperature of asphalt concrete when application of the waterproofing membrane has considerable influence on the performance of waterproofing system. As described above, waterproofing system can be influenced by several factors. If they are not considered under construction, the overlooking will cause the damages of pavement and waterproofing system after traffic opening.

• Journal of Engineering Education Research
• /
• v.11 no.2
• /
• pp.65-78
• /
• 2008

Currently co-work programs between industries and engineering schools play an important role for mutual interests, win-win strategy. Industries can develop new technologies through the human resources and facilities in school and schools are able to have research achievements by applying their own theoretical abilities to real field of industries's projects. However most co-work programs between industries and engineering schools mainly focus on programs such as research projects with graduate research lab, on-site training for job and training program for field engineers. And more it is difficult for schools to make co-work programs targeted engineering education for undergraduate school students because of many constraints such as planing program, budget and indifference of companies. Therefore this paper introduces LG Electronics Display Idea Competition hosted by LG Display Division in Kumi, S. Korea and present what benefits to both school and company made through this program and unique model of co-work program for engineering education between school and company in country.

• Journal of Digital Contents Society
• /
• v.5 no.4
• /
• pp.251-256
• /
• 2004

The flatness of a silicon wafer concerned with ULSI chip is one of the most critical parameters ensuring high yield of wafers. That is necessary to constitute the circuit with high quality for he surface of silicon wafer, which comes to be base to make the direct circuit of the semiconductor, Flatness, therefore, is the most important factor to guarantee it wafer with high quality. The process of polishing is one of the most crucial production line among 10 processing stages to change the rough surface into the flatnees with best quality. Currently at this process, it is general for an engineer in charge to observe, judge and control the model of wafer from the monitor of measuring equipment with his/her own eyes to enhance the degree of flatness. This, however, is quite a troublesome job for someone has to check of process by one's physical experience. The purpose of this study is to approach the model of wafer with digital contents and to apply the result of the research for an algorithm which enables to control the polishing process by means of measuring the degree of flatness automatically, not by person, but by system. In addition, this paper shows that this algorithm proposed for the whole wafer flatness enables to draw an estimated algorithm which is for the thickness of sites to measure the degree of flatness for each site of wafer.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.262-267
• /
• 2008

The domestic construction market started to expand steadily since 1970s. The building market which utilizes a sandwich panel with advantages of economical construction expenses and convenient construction has grown rapidly in recent years. However, the companies which specialize in constructing sandwich panels are relatively small or medium size, compared with other construction companies. As a result, studies on the improvement of productivity have not been conducted sufficiently. In this study, the construction sites of sandwich panel are investigated, and the work processes by each team are analyzed. Additionally, the productivity and the construction cost of each construction team are analyzed by constructing a model using the Web-Cyclone. It is expected that the results of this study can be applied to estimate the productivity and the construction cost of a sandwich panel construction that is appropriate for the on-site characteristics of small and medium sized construction companies in Korea. Also, similar processes can be simulated based on the modeling constructed in this study.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.24 no.4
• /
• pp.347-357
• /
• 2018

Purpose: The purpose of this study was to identify patient safety awareness and emergency response ability and affecting factors perceived by nursing homes and home visiting caregivers. Methods: This study was a descriptive study that conveniently extracts nursing caregivers who care for elderly patients in S and G provinces, Korea. Data collection was done by structural questionnaires from April to May 2018. A total of 204 responses consisting of 103 nursing homes and 101 home visiting caregivers were used for data analysis in SPSS Win 22.0. Results: Patient safety awareness and emergency response ability of nursing homes caregivers with each $4.24{\pm}0.50$, $74.26{\pm}09.57$ was each higher than that of the home visiting caregivers with $3.68{\pm}0.49$, $68.02{\pm}12.12$ (p<.001). The affecting factors of the patient safety awareness were working place, safety education, and daily average working hours with 12 or more (F = 27.30, p<.001) and that of emergency response ability were number of patients per personnel with 9 or more and emergency situation experience (F=14.00, p<.001). Conclusion: These results suggest that it is necessary to develop a safety education program that can share indirectly experience emergency situations that occur on the job site.