• 한국수산과학회지
• /
• 제52권6호
• /
• pp.685-695
• /
• 2019

To assess the state of Todarodes pacificus fisheries, we examined changes in major fishing and ecological characteristics by comparing jigging fishery data between high (HCLP, 1996-2000) and low (LCLP, 2013-2017) catch level periods. The peak catch occurred in October during the HCLP compared with December during the LCLP. The average catch per unit effort was higher during the HCLP (1.3 tons/jigging vessel) than LCLP (1.0 ton/jigging vessel). During the HCLP, fishing grounds were highly concentrated in the southwestern East Sea and Yamato bank, whereas during the LCLP, the distribution of grounds extended to the South Sea, West Sea, and northern East Sea (near Russian waters) at a low density. Water temperatures in the main fishing ground in the southwestern East Sea were higher at 0, 50, and 100 m depths during the LCLP than HCLP. Meanwhile, the average mantle length of catches decreased from 23.5 cm during the HCLP to 22.21 cm during the LCLP. The mantle length at 50% maturity also decreased between the two periods from 22.06 (HCLP) to 18.77 cm (LCLP). These findings will help guide future management strategies for T. pacificus.

• 수산해양기술연구
• /
• 제58권4호
• /
• pp.299-309
• /
• 2022

Among the fishing vessels operating in the coastal waters, jigging fishing vessels were considered representative vessels engaged only by wind, sea, tide, and external force. Then, a fishing vessel with a length of shorter than 10 m from July 1, 2018 to August 5, 2019 was studied to obtain a drift prediction model by multiple regression analysis. In the correlation analysis between variables for leeway of speed and direction, the speed and direction of tidal seem to be the most affected in coastal waters. Therefore, it should be considered an explanatory variable when conducting drift tests. As a result of multiple regression analysis on the predicted equations of leeway speed and direction due to the external force on the drift of the fishing vessel, p < 0.000 was considered significant in the F-test, but the coefficient of determination was 55.2% and 37.8%. The effect on the predicted leeway speed was in the order of the tidal speed and current speed. In addition, the impact on the predicted leeway direction was in the order of the tidal speed and current speed. ŷ(m/s) = - 0.0011(x1) + 0.9206(x2) + 0.0001(x3) + 0.0002(x4) + 0.0050(x5) + 0.0529(x6) + 0.2457 ŷ(degree) = 0.6672(x1) + 93.1699(x2) + 0.0585(x3) - 0.0244(x4) - 1.2217(x5) + 4.6378(x6) - 0.0837

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.91-98
• /
• 2012

This study is aimed to utilize a basic data for setting up an allowable air noise with IMO standard in accommodation and working areas of 24m longer fishing vessels. The air noise in accommodation and working areas of 300 tons class squid-jigger were evaluated and the levels were compared to the allowable levels of IMO. The results indicated that the maximum range of noise levels was estimated to be between 54.8dB (A) and 83.2dB, and the correlation between the distance from the main engine to measuring point and the maximum noise level of each point was shown to be y=-13.8log (r)+92.91 ($r^2=0.821$). In addition, except the case of making an accommodation area near to the engine room in 24m longer jigging vessels, it was evaluated that the accommodation noise regulation of 1,600 tons international voyage vessels with 60dB (A) or an improved noise level with 65dB (A) could be properly applied.

• 수산해양기술연구
• /
• 제43권4호
• /
• pp.310-319
• /
• 2007

To investigate the catches of squid jigging fishery, a series of fishing experiments was conducted in the high seas of the Northwest Pacific($40^{\circ}-43^{\circ}N$, $150^{\circ}-155^{\circ}E$) during the period of 1 August to 22 October 2005 by commercial fishing vessel. The number of 142 test fishing was carried out in the Northwest Pacific during 83days. The total catch were 47,524kg as 4 squid species and CPUE was $8.9kg/line{\cdot}day$. CPUE showed high values in the frontal zone during the survey. Main squid species caught from the experimental fishing were the neon flying squid, Ommastrephes bartrami(96.8%) and the boreopacific gonate squid, Gonatopsis borealis(3.2%). Dorsal mantle length of the neon flying squid were increased by the time and increasing of the hook size. Loss rate of the neon flying squid in the water showed the highest values in 28.2% compare to the others. And the loss rate of the front roller and in the air were 1.1% and 1.0%, respectively.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.623-632
• /
• 2014

In this study, the stability of fishing vessels get some change in accordance with the installation of LED luring lamp in comparison with metal halide luring lamp were investigated. Inclining test for 9.77 ton class of squid jigging and hair-tail angling vessel was performed in order to make a stability evaluation. A performance analysis of the target vessels to the stability on the basis of KST-SHIP program was evaluated. The results were as follows in this study. The stability of the fishing vessel by a metal halide such as LED and the like according to the result obtained by the inclining test is a slightly present difference, and the stability is not affected. The fishing vessel with LED lamp installed satisfies all the stability criteria specified in law and IMO rule. Compared to the metal halide LED lamp the increase of the height of the center of gravity and the initial transverse metacenter was caused. Due to the LED installation, the somewhat wider wind area of the waterline, which appears as a result, does not lead to an actual increase in rolling period. But then it is necessary to be designed on that the LED lamp shape reduces wind pressure area. Because of LED lamp installation, the GM value of vessels is increasing faster rolling cycle so causes a decrease in the sense that the crew is aboard.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.511-519
• /
• 2014

This study is aimed to analyze the three-dimensional underwater irradiance using an optical simulation software and to clarify the propriety and operation method under considering luminous intensity distribution of the luring lamp and penetrability in the seawater, when we use the light diffuser type 300W high powered LED and the metal halide lamp (MHL) on a coastal squid jigging vessel in the 10-ton class, simultaneously. For their attenuation characteristics of each wavelength in relation to the sea, LED lamp was to be effective in the 1.9-fold at 50 m depth and 2.1-fold at 80 m for underwater irradiance more than MHL according to the power consumption. In addition, the underwater irradiance distribution using the LED and MHL combination was rather increased even when reducing total power usage up to 20% depending on the simulation with changing the configuration and lighting angle of the lamp. These results can be utilized as an evaluation method of the operation and performance of the LED lamp according to adjusting its arrangement and lighting angle.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.347-355
• /
• 2016

In this study, a new designed propeller was applied on 24 ton class squid jigging vessel to reduce of fuel consumption. The selected squid jigging boat was under construction at the shipyard to determine the resistance of the hull through the model experiment. The propeller design was carried out by using the experimental data and ITTC procedures. Sea trials were performed by measuring the speed and the horsepower required by the condition of five power levels of engine load, namely 70%, 80%, 90%, MCR and maximum engine power. The speed and delivered horse power were compared between the conventional propeller and the new design propeller. Delivered horse power by installing the new propeller takes 90% engine load at start-up conducted by decreased 9.06%. The measuring speed is increased up to the 0.6 knots in the low-speed range to high range. This study showed that only the design and installation of a new propeller can improve the propulsion efficiency of the boats; furthermore, reduce fuel costs can be achieved at the same time by improving the increased cruising speed.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.337-345
• /
• 2012

One of representative Korean fisheries, jigging and angling has 5,700 vessels for squid and hairtail. Hairtail angling is the most typical fishery in Jeju and has an enormous impact on regional economy. However, the price hike in oil and labor costs triggered the necessity of developing a high efficient and energy saving fish luring lamp in recent times. For that reason, this study aimed to analyze the fishing performance of the aircooled LED lamp targeting hairtail angling fishery. The experiment was conducted from September through October in 2009-2011 for a 9.77 ton of fishing vessel setting up 100 lamps. The fishing performance was tested compared with 6 vessels using metal halide lamps in the same waters. As the LED lamp's performance goes up, different lamps were used in 2008 for 80W, 2009 for 120W and 2011 for 180W respectively. The catch and CPUE of the experimental vessel have gradually increased respectively taking the $4^{th}$ and $6^{th}$ place in 2009, the $4^{th}$ and $2^{nd}$ place in 2010, the $1^{st}$ and $1^{st}$ place in 2011 among the 7 vessels. In summary, the LED fishing lamp showed higher fishing performance than comparison groups. It saved 33% of oil consumption and cut down on operating expenses and greenhouse gases emission.

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.110-116
• /
• 2023

In this study, samples of sea anchor canopy cloth mainly used in Korean jigging fishing vessels were collected and tested for performance evaluation. The canopy cloth of sea anchor is a basic element of form composition that is known to have the greatest influence on anchor performance. In order to evaluate the performance of sea anchor canopy cloth, five types of samples were tested for new metric count, tensile strength, water vapour transmission rate and drying speed according to the national standard (KS), and some correlations were identified. As a result of the test, the new metric count of cloths was 335.5-443.4 denier in warp and 217-447.6 denier in weft, and the minimum tensile strength was 860 N in warp direction and 430 N in weft direction. The apparent number and tensile strength of cloth were proportional, the water vapour transmission rate of the sample was 206.8 g/m²h, and the drying speed was 90-100 min. This study partially confirmed the performance evaluation based on speculation by the standard test method, and further research is needed on the clear relationship between the research results and the performance of the sea anchor.

• 수산해양기술연구
• /
• 제49권2호
• /
• pp.116-125
• /
• 2013

Jigging and angling fishery is prevalent in the East Sea of Korea and this fishery needs many lamps to attract the fish. And the fishing boat uses 24~47 ballasts by the vessel's tonnage to turn on the fishing lamp. A 3.5kW magnetic-type ballast being currently used at many fishing boats can drive two 1.5kW metal-halide lamps. Meanwhile, this ballast has large weight (25kg) and volume. Therefore it is one of reason for the over-consumption of energy and the fire, resulted from overheat and electrical short, occurs occasionally because the ballast is installed at narrow and hot engine room. In addition, most of magnetic ballast has several problems such as periodic condenser replacement, low energy efficiency and making lamp short life, etc. So it is necessary to improve or develop newly the electronic ballast, which has to be smaller, lighter and more efficient. An electronic ballast was designed for the fishing boat by considering duration and electromagnetic interference in the study. Its weight and volume are respectably 40% and 66% compared to current ballast on the basis of PCB. The metal-halide lamp's spectrum of the designed ballast was nearly same to that of the current ballast in the test of lighting. In particular, the light stability was improved and there isn't any radio interference. As mentioned above, it is expected that the developed electronic ballast can replace current magnetic ballast because of many advantages related to energy-saving.