• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.190-193
• /
• 2004

This paper presents studies on the creation time of scanning path using rapid prototype device. In the case of Jewellery, it needs to take time too much at the whole process of rapid prototype in accordance with heigh of the multi-layered. When increases the number of polygon by heigh of the Multi-layered, it has proper influence on the creation time of scanning path. Therefore, we can get the spending time and the number of polygon for the creation during increase the heigh of the multi-layered. These values are showed by the quantitative. We try to analyze relation between these and heigh of the multi-layered.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.205-210
• /
• 2005

This paper addresses the correlation between the change of file size and the scanning path build time by the slicing height of STL file. Though the study about STL file has been achieved quite actively scanning path build time using STL file is not investigated so much to be satisfied. The file size depends on the number of polygon created by the slicing height specified. And this number of polygons increases in a regular rate. The correlation between the number of polygons and the scanning path build time is examined and verified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.114-118
• /
• 2004

This paper is compared the build time of scanning path as to laminate height of the SLC and STL file. The STL file improve the surface roughness according to slicing height. But it have the fault spending long time to the creation of scanning path by being lower slicing height. So we proposed the SLC file to improve this fault. Therefore this paper showed to the build time of scanning path by the increase of peace using the jewellery model.

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.440-446
• /
• 2006

This study relates to the effect of forming time of injection path on the total process. The whole process can be divided into build process of forming path of injection and after treatment process. The total time required for the whole process could be reduced by reducing the forming time of injection path using SLC file to correct the problems of STL file that is the basic file format for high speed molding devices. First of all, I verify the forming time of injection path according to the conditions of STL file during the formation of injection path. And I verify problems using STL file during formation of injection path. And then I tried to solve problems of STL file by comparing between the formation time of injection path and the existing method using SLC files.

• 패션비즈니스
• /
• 제1권3호
• /
• pp.1-18
• /
• 1997

The purpose of this study is to investigate Modernism of Gabrielle Chanel in respect to her fashion business. Chanel always considered the work of a fashion designer 'a technique, a craft, a trade' and chastised couturiers who looked upon themselves as artists. She was the first to cater to the public in its broader sense and to produce standard which appealed to every taste, the first to democratize the art of dressmaking for purely economic reasons. The results were as follows; 1. Chanel personified ~his new spirit of independence and evolved a style of dress for the modern, liberated woman. 2. Chanel excelled at fabrics, their interpretation, and an ability to use them. She had taken a humble material, one that was used by men and that they had shunned, and turned it into a fashionable fabric. In the process she also accelerated the growth of the ready-to-wear industry for it was a fabric within the financial reach of the majority of woman who wanted to dress fashionably but were not well off. 3. Chanel thought black chic and would never go out of fashion. As American Vogue for 1 October 1926 prognosticated, her little black dress became a kind of uniform. 4. Chanel represented an exception among couturiers because she was flattered that her styles were so popular and widely copied. She believed that her style would be affirmed by high-street copies-after all, copying is the sincerest form of flattery. 5. Chanel changed the concept of costume jewellery. It was not an original idea of Chanel's. Whereas Poiret had pioneered the original idea of costume jewellery, it was Chanel's avant-garde way with it not to mention her usual deceptive simplicity and supreme artistry that made costume jewellery evolve a successful and lucrative part of the fashion industry.

• 대한지리학회지
• /
• 제31권1호
• /
• pp.19-37
• /
• 1996

대도시권내 소매업의 지역구조 변화를 이해하기 위하여 우리나라에서 소매업의 규모가 가장 큰 수도권지역 소매업 경영의 지역적 변화형태를 고찰한 결과 다음과 같은 점이 밝혀졌다. 1979~1991년 사이에 연간판매액에 의한 소매업의 업종구성 변화는 <종합 소매업>과 <개인 운수장비 소매업 및 주유소 운영업>의 구성비가 매우 높아졌다. 그리고 소매업의 경영상의 변화는 개인 경영조직이 탁월해지고, 종사자의 常傭化가 많이 나타났다. 주성분 분석에 의한 수도권지역 소매업의 주된 경영성분은 1. 소매업의 대규모화와, 2. <섬유, 의복, 신발 및 의복 악세사리 소매업>, <가구, 철물 및 가정용품 소매업(가전제품 포함)>, <장신구 및 시계 소매업>의 법인 조직화와 상용 조사자의 고용화이다. 소매업 경영의 유형변화를 보면, 1979년에는 섬유, 의복, 신박 및 의복 악세사리 소매업, 가구, 철물 및 가정용품 소매업(가전제품 포함), 장신구 및 시계 소매업의 법인 조직화와 상용 종사자의 고용화, 달리 분류되지 않은 일반 소매업의 대규모 소매업의 법인 조직화가 다소 이루어졌으나, 1991년에는 소매업의 대규모화가 이루어진 것이다. 이러한 경영변화를 나타내는 지구는 서울시와 그 위성도시 및 경기도의 남동부지역이다. 또 1979년에 섬유, 의복, 신발 및 의복 악세사리 소매업, 장신구 및 시계 소매업, 달리 분류되지 않은 일반 소매업의 대규모 소매업의 법인 조직화가 다소 이루어진 것에서, 1991년에는 개인 운수장비 소매업 및 주유소 운영업의 상용 종사자의 고용화가 이루어졌다. 이러한 변화를 나타내는 지구는 경기도의 동부와 북부지역이다. 따라서 우리나라 수도권지역 소매업 경영의 변화형태는 1979년에 일부 소매업이 법인 조직화와 상용 종사자의 고용화가, 1991년에는 소매업의 대규모화와 개인 운수장비 소매업과 주유소 운영업의 종사자 고용화가 나타난 점이다.

• The International Journal of Costume Culture
• /
• 제6권2호
• /
• pp.69-82
• /
• 2003

The Scythians had a veritable passion for adornment, delighting in decorating themselves no less than their horses and belongings. Their love of jewellery was expressed at every turn. The most magnificent pieces naturally come from the royal tombs. In the area of the neck and chest the Scythian had a massive gold Torques, a symbol of power, made of gold, turquoise, cornelian coral and even amber. The entire surface of the torque, like that of many of the other artefacts, is decorated with depictions of animals. Scythian Torques are worn with the decorative terminals to the front. It was put a Torque on, grasped both terminals and placed the opening at the back of the neck. It is possible the Torque signified its wearer's religious leadership responsibilities. Scythian Torques were divided into several types according to the shape, Torque with Terminal style, Spiral style, Layers style, Crown style, Crescent-shaped pectoral style.

• 패션비즈니스
• /
• 제2권4호
• /
• pp.13-20
• /
• 1998

Scandinavia consists of Norway, Sweden, Denmark, Finland, Iceland and Lapland, all linked by historical and geographical ties. In this respect, the objective of this research was to clarify the folk costume of the Scandinavia. Scandinavia many skilled handicrafts are practised, such as leatherwork, silverwork and embroidery. The most popular colours are yellow, blues, reds, greens and white. For women the costume consist of a blouse with a bodice, skirt and apron, over which is worn a jacket or shawl, accompanied by a headdress. Their accessories may be jewellery, belts, kerchiefs and separate pockets. For the men, the costume is a shirt, trousers or breeches, worn with a waistcoat and jacket, neck scarf, and topped with a hat or cap. And the Lapps, both men and women, wear woollen shirts beneath their blue-skirted tunics, and blue trousers. It is one of the most ancient of the costumes worn in western Europe, due to its total suitability to their way of life.

• 한국융합학회논문지
• /
• 제11권2호
• /
• pp.225-230
• /
• 2020

3D프린팅의 활용은 매우 혁신적이면서 유용한 기술이다. 하지만 장신구 분야에서는 3D프린팅 기술은 제작방법의 한 분야로서 한정적 으로 사용되는 기술이다. 이러한 3D프린팅의 한계를 극복하기 위해 3D프린팅 출력방식 중 가장 대중적이며 조형활동에 적합한 출력방식을 선정하고 출력시간, 조건을 한정하여 장신구에 적용 가능성을 알아보기 위해 비주조과정과 주조과정 각각의 방법을 통해 시제품까지 완성하고 이를 비교해 보았다. 그 결과, FDM출력 방식은 비용과 시간적인 측명에서 매우 긍정적인 장점이 있지만 표면에 적층구조가 지워지지 않으며 출력과정시 발생되는 필라멘트의 잔여물로 인해 선 조형을 표면시 완성도가 떨어지는 단점이 있었다. DLP출력방식은 표면처리가 고르며 완성도가 높은 반면, 비용과 시간적인 측면에서 효율성이 떨어지는 단점이 있었다. 하지만 두 출력방법 모두 장신구 활용 가능하며 향후 디자인에 맞는 다양한 출력방법연구가 이루어져 장신구에 3D 작품연구가 활발히 수행되기를 바란다.

• 복식
• /
• 제58권3호
• /
• pp.19-33
• /
• 2008

Hair style of royal ladies in the 19th century according to the wedding record of King Heon-jong and Lady Sunhwagung is studied in this paper and summarized as follows: First, Saengmeori was a bridal hair style for the wedding night in Gyeonmagi(jacket) and Daeranchima(Skirt with gold trimming). It was a typical girls' hair style before the coming-of-age ceremony. It was composed of Saengmeoridari(wig), Seockunghwang, Jogduri(Coronet decorated with Jewellery), Saengdaeng-gi(hair ribbon) trimmed pearls, and jade disk trimmed pearls. Second, Garaemeori(double bun hair style) was the hair style with Wonsam when the chosen bride went to Byeol-Gung, a special palace for the bridal. It was composed of Gareachi(wig) and Cheopji(small wig) with the frontal hair ornament, jogduri, and Saidang-gi(hair ribbon). Third, Jojimmeori(single bun hair style) is a basic hair style for the madame. It was composed of jojimmeorichilbo, jogduri, jojimmeoridari(wig), and Cheopji with a frontal hair ornament. Fourth, Keunmeori is the second most important hair style for the court ceremony. It was composed of Eoyeomjogduri, Eoyeomdari(wig), Cheopji with a frontal hair ornament, Keunmeoridari(wig), and Keunmeorichilbo. Fifth, Susik, the most important hair style for the court ceremony, is the hair style for ceremonies including the day of becoming the formal queen, the first greeting day to the King's family. It was composed of 4 kinds of wigs and Susik-chilbo.