• 한국재료학회지
• /
• 제29권10호
• /
• pp.639-646
• /
• 2019

Ink-jet printing is a manufacturing process technology that directly prints a digitalized design pattern onto a substrate using a fine ink jetting system. In this study, environmentally friendly yellow aqueous ceramic ink is synthesized by mixture of distilled water, yellow ceramic pigment and additives for ink-jet printing. The graft polymer, which combines electrostatic repulsion and steric hindrance mechanism, is used as a surfactant for dispersion stability of aqueous ceramic ink. Synthesized ceramic ink with graft polymer surfactant shows better dispersion stability than did ceramic ink with PAA surfactant; synthesized ink also shows desirable ink-jet printability with the formation of a single ink droplet during printability test. Finally, ceramic ink printed on glass substrate and ceramic ink with graft polymer surfactant shows a high contact angle without surface treatment on glass substrate. Consequently, it is confirmed that the ceramic ink with graft polymer surfactant can achieve high printing resolution without additional surface treatment process.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.146-158
• /
• 2021

This paper reports the preparation of an ink-jet printed flexible electrochromic device based on a water-soluble viologen-functionalized dendrimer. Polyamidoamine (PAMAM) dendrimers were modified with different concentrations of 1-1 bis(propylamine)-4,4'-bipyridylium dibromides to obtain solution-processable electrochromic materials (K1/2 and K1). FTIR, NMR, and elemental analyses are used to characterize synthesized viologens. Moreover, their electrochemical properties were investigated using cyclic voltammetry in an electrolyte solution consisting of 0.1 M HCl to find the optimum viologens. The low-cost ink-jet printer was used to print the prepared water-soluble electrochromic inks onto the ITO coated PET substrate to form desired transparent patterns. The electrolyte was applied on the printed electrochromic ink to make a sandwich with another ITO coated PET to prepare the electrochromic devices (ECD). By applying an electrical potential (0 to -2 V), the transparent ECD's color changed from colorless to blue. The color changes for the optimum ECD (K1), which had more viologen units on the dendrimer, was accompanied by an optical contrast of 47% and 311.5 ㎠C-1 coloration efficiency at 600 nm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1747-1751
• /
• 2008

Electrohydrodynamic jet printing (EHDP) technique is widely used for the direct writing. However, in the existing EHDP method, the printing characteristics are affected by the printing substrate used, and the line width of the printed is determined by the geometry of the nozzle. We propose an EHDP method which is capable of (1) removing the effect from the substrate, and (2) controlling the line width through the ON/OFF control of the each nozzle in the nozzle array. Printing characteristics of our EHDP system were examined and successful ON/OFF control of the nozzle array were demonstrated. By using the proposed EHDP, it is expected that stable meniscus regardless of the substrate and different line widths even using the same nozzle can be achieved.

• 대한기계학회논문집B
• /
• 제39권4호
• /
• pp.379-384
• /
• 2015

최근 전기방사를 이용한 프린팅이 미세 패터닝 분야에 응용이 되고 있다. 전기방사를 이용한 패터닝은 연속 프린팅 방식으로 기존의 요구적출형 방식에 비해 패터닝 속도가 빠르다는 장점이 있다. 안정적인 연속 프린팅을 위해서는 고분자의 폴리머를 프린팅하려고 하는 잉크에 혼합하는 것이 필요하다. 본 연구에서는 PEO 를 이러한 첨가 폴리머로 사용하였다. 이러한 폴리머의 첨가에 대한 잉크의 점도 및 Taylor cone 형성에 대해 미치는 영향을 조사하였다. 마지막으로 전기방사 프린팅의 예로서 실버 페이스트 잉크를 유리 기판 위에 패터닝하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.69-70
• /
• 2023

The development of advanced 3D printing technologies has opened up new opportunities for customized digital designs in the construction industry. Using nano- and micro-scale additives is expected to improve the performance of cement-based materials in 3D printing. TiO₂ particles have been widely used as reinforcing additives in cement-based materials. Therefore, this study aims to investigate the application of cement-based materials containing multi-size TiO₂ particles in binder jet 3D printing and the effect of different-size TiO₂ particles on the performance of printed samples. TiO₂ particles exhibit an excellent filling effect, which increases the density of the printed samples and promotes hydration, thereby improving the compressive strength of the samples. In addition, larger TiO₂ particles exert more pronounced filling and photocatalytic effects on the resulting samples.

• 한국결정성장학회지
• /
• 제27권5호
• /
• pp.256-262
• /
• 2017

$1000^{\circ}C$ 이상의 고온에서도 안정적인 발색 특성을 보이는 세라믹 잉크를 활용한 디지털 프린팅 기술은 우수한 내구성을 가지는 제품을 다양한 디자인을 적용하여 생산할 수 있는 친환경 공정이라는 장점으로 인해 최근 관심이 높아지고 있다. 특히 건축용 세라믹 타일 산업에서 잉크젯 프린팅 기술 도입을 통한 디지털 공정으로의 전환은 점점 가속화되고 있으며, 이와 관련된 프린팅 시스템 및 고온발색 세라믹 잉크에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 세라믹 타일의 표면 유약층에서 고온발색 세라믹 잉크의 인쇄적성을 분석하였다. 디지털 4원색인 Cyan, Magenta, Yellow, Black 색상의 고온발색 세라믹 잉크가 프린팅된 세라믹 타일의 표면 및 단면의 미세구조를 분석함으로써 세라믹 잉크의 종류에 따른 인쇄특성에 대해 비교하였다. 또한 고온 열처리 공정이 필수적으로 요구되는 세라믹 소재의 특성상 잉크젯 프린팅 후 세라믹 잉크 패턴의 열처리 공정에 따른 거동변화에 관하여 고찰하였으며, 세라믹 타일 유약층에서 세라믹 잉크의 인쇄적성은 미세구조 및 고온 소성 과정에 큰 영향을 받고 있음을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1532-1534
• /
• 2008

Aquesous carbon nanotubes (CNTs) solutions were prepared using SDS (sodium dodecyl sulfonate) and NADDBS (sodium dodecylbenzene sulfonate). Our inks are found to have the viscosity of 1-2 cps. In addition, the surface tension of inks inversely decreased with increasing surfactant concentration and then saturated at critical micelle concentration (CMC). The low surface tension at CMC gave rise to lower contact angles on Indium layers, resulting in larger printable feature sizes. In the fabrication of cold cathode, jet-printing is feasible to modify and scale up the cathode structures. These feasibilities could contribute jet-printing method to be more adaptable for making large-area cold cathodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.673-675
• /
• 2005

Ink jet printheads are now widely used in manufacturing processes that require precise dispensing of materials. Today, Dimatix manufactures a variety of drop-on-demand ink jet printheads for the industrial printing market, but emerging opportunities present fresh challenges to our technology. In response to requirements for digitally printing on flexible substrates and dispensing novel electronic fluids, we are developing next generation jetting technology based on our three-dimensional silicon MEMS technology with a piezo-driven pumping chamber integrated into the chip structure. This presentation will address the functional and physical design features and properties of Dimatix's MEMS process, its characteristics, reliability and usability. Examples of opportunities and applications for digitally printing electronic fluids on flexible substrates with MEMS-based ink jet technology will be presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.920-922
• /
• 2009

Flexible, transparent thin-film transistor with active layers composed of carbon nanotube-based conducting ink were fabricated on a plastic substrate by ink-jet printing. The properties of the formulated conducting ink containing carbon nanotubes, a conducting polymer, and additives were characterized and optimized. The conducting ink was applied to flexible thin-film transistors using ink-jet printing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.937-939
• /
• 2009

In this paper, we report electrical properties of OTFTs made by ink-jet printing with polyvinylphenol (PVP) for bank layer and bis(triisopropylsilylenthynyl) pentacene (TIPS-pentacene) for semiconductor. We could achieve better crystallization and surface uniformity of TIPS pentacene by employing PVP bank layer. The OTFT with PVP bank layer exhibited an field-effect mobility of 0.18 $cm^2$/Vs, current on/off ratio of $2.09{\times}10^5$, and subthreshold slope of 0.42 V/decane.