• Journal of Korean Biological Nursing Science
• /
• v.21 no.4
• /
• pp.318-325
• /
• 2019

Purpose: The purpose of this study was to identify the effects of a finger guard developed to prevent sharp injuries in nursing students. Methods: This study was an equivalent control group posttest design. Seventy nursing students were randomly allocated to either the experimental group (n= 35) or the control group (n= 35). The finger guard was used whileopening the glass ampoule in the experimental group. The outcome variables such as sharp injuries, anxiety and user satisfaction were measured. Results: Sharp injuries were 0 in the experimental group and 2 in the control group (p= .160). Anxiety in the experimental group was significantly lower than the control group (p< .001). User satisfaction was 4.33 score in the range from 1 to 5, the highest item was the weight (4.63), followed by effectiveness (4.51). Conclusion: Using a protective device while opening the glass ampoule was observed to be effective in reducing anxiety among the nursing students, and exhibited protection of skin.

• Coupled systems mechanics
• /
• v.3 no.2
• /
• pp.195-211
• /
• 2014

When strong seismic forces act on reinforced concrete structures, their beam-column connections are very susceptible to damage during the earthquake event. The aim of this numerical work is to evaluate the influence of the internal steel reinforcement array on the nonlinear response of a RC beam-column connection when it is subjected to strong cyclic loading -as a seismic load. For this, two specimens (extracted from an experimental test of 12 RC beam-column connections reported in literature) were modeled in the Finite Element code FEAP considering different stirrup's arrays. In order to evaluate the nonlinear response of the RC beam-column connection, the 2D model takes into account the nonlinear thermodynamic behavior of each component: for concrete, a damage model is used; for steel reinforcement, it is adopted a classical plasticity model; in the case of the steel-concrete bonding, this one is considered perfect without degradation. At the end, we show a comparison between the experimental test's responses and the numerical results, which includes the distribution of shear stresses and damage inside the concrete core of the beam-column connection; in the other hand, the effects on the connection of a low and high state of confinement are analyzed for all cases.

• Restorative Dentistry and Endodontics
• /
• v.42 no.2
• /
• pp.140-145
• /
• 2017

Objectives: The aim of this randomized, controlled, prospective clinical study was to evaluate patients' intraoperative discomfort during root canal preparations in which either multi-file rotary (Mtwo) or single-file reciprocating (Reciproc) systems were used. Materials and Methods: Fifty-five adult patients, aged between 25 and 69 years old, with irreversible pulpitis or pulp necrosis participated in this study. Either the mesiobuccal or the distobuccal canals for maxillary molars and either the mesiobuccal or the mesiolingual canals for mandibular molars were randomly chosen to be instrumented with Mtwo multi-file rotary or Reciproc single-file reciprocating systems. Immediately after each canal instrumentation under anesthesia, patient discomfort was assessed using a 1 - 10 visual analog scale (VAS), ranging from 'least possible discomfort' (1) to 'greatest possible discomfort' (10). The Wilcoxon signed-rank test was used to determine significant differences at p < 0.05. Results: Little intraoperative discomfort was found in all cases. No statistically significant differences in intraoperative discomfort between the 2 systems were found (p = 0.660). Conclusions: Root canal preparation with multi-file rotary or single-file reciprocating systems had similar and minimal effects on patients' intraoperative discomfort.

• Journal of Power Electronics
• /
• v.11 no.5
• /
• pp.743-750
• /
• 2011

This article deals with the sensor-less control of a DC Motor via a SEPIC Converter-Full Bridge combination powered through solar panels. We simultaneously regulate, both, the output voltage of the SEPIC-converter to a value larger than the solar panel output voltage, and the shaft angular velocity, in any of the turning senses, so that it tracks a pre-specified constant reference. The main result of our proposed control scheme is an efficient linear controller obtained via Lyapunov. This controller is based on measurements of the converter currents and voltages, and the DC motor armature current. The control law is derived using an exact stabilization error dynamics model, from which a static linear passive feedback control law is derived. All values of the constant references are parameterized in terms of the equilibrium point of the multivariable system: the SEPIC converter desired output voltage, the solar panel output voltage at its Maximun Power Point (MPP), and the DC motor desired constant angular velocity. The switched control realization of the designed average continuous feedback control law is accomplished by means of a, discrete-valued, Pulse Width Modulation (PWM). Experimental results are presented demonstrating the viability of our proposal.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.1117-1126
• /
• 2017

The main contribution of this paper is the use of sensorless active diodes to generate the gate signals for a three-phase boost-rectifier with a self-powered control scheme. The sensorless operation is achieved making use of the gate control signals generated by the active diode schemes on each of the switching devices using a pulse width half-controlled boost rectifier modulation technique (PWM-HCBR). The proposed scheme synchronizes the gate control signals with a three phase voltage supply. Autonomous operation is obtained making use of the output DC bus to feed the control circuitry, the active diodes and the driver circuitry. The three-phase boost-rectifier is supplied by a three-phase permanent magnet electric generator powered by a solar concentrator dish with variable voltage and variable frequency conditions. Experimental results report an efficiency of up to 94.6% for 25 W and an input of 3.6 V peak per phase with 450.

• Steel and Composite Structures
• /
• v.32 no.3
• /
• pp.337-346
• /
• 2019

The present paper tries to contribute fill the gap of application of the component method to tubular connections. For this purpose, one typical joint configuration in which just one component can be considered as active has been studied. These joints were selected as symmetrically loaded welded connections in which the beam width was the same as the column width. This focused the study on the component 'side walls of rectangular hollow sections (RHS) in tension/compression'. It should be one of the main components to be considered in welded unstiffened joints between I beams and RHS columns. Many experimental tests on double-sided I-beam-to-RHS-column joint with a width ratio 1 have been carried out by the authors and a finite element (FE) model was validated with their results. Then, some different analytical approaches for the component stiffness and strength have been assessed. Finally, the stiffness proposals have been compared with some FE simulations on I-beam-to-RHS-column joints. This work finally proposes the most adequate equations that were found for the stiffness and strength characterization of the component 'side walls of RHS in tension/compression' to be applied in a further unified global proposal for the application of the component method to RHS.

• PNF and Movement
• /
• v.17 no.2
• /
• pp.223-236
• /
• 2019

Purpose: This research was to develop a module for problem-based learning(PBL) and to enhance the problem-solving abilities of physical therapy students in a neurological physical therapy course and to evaluate the effects of the module using quantitative and qualitative data. Methods: The PBL module was applied to 55 third-year physical therapy students who participated in a neurological physical therapy course at S university in Seoul. Anonymous self-report questionnaires and reflection journals were collected, and the data were analyzed. Results: The results of the analysis showed that the academic achievements of the students who participated in the first PBL class improved compared to the academic achievements of the students who had participated in the same class in the previous semester. Second, the students who participated in the PBL class evaluated the PBL as a very effective learning method for developing clinical practical ability. Third, the students of the PBL class showed increased cooperation and communication abilities between team members. Conclusion: The results of this study indicated that, if PBL class case studies and various types of teaching and learning methods appropriate for theoretical and practical fields are continuously studied, then it is expected that teaching models will be developed that can develop flexibility and creativity among preliminary physical therapists in a rapidly changing medical environment.

• Earthquakes and Structures
• /
• v.20 no.2
• /
• pp.161-173
• /
• 2021

The structural behavior of a tensile fabric structure, known as hypar, is investigated. Seismic-induced stresses in the fabric and axial forces in masts and cables are obtained using accelerograms recorded at different regions of the world. Time-history analysis using each recording are performed for the hypar by using finite element simulation. It is found that while the seismic stresses in the fabric are not critical for design, the seismic tensile forces in cables and the seismic compressive forces in masts should not be disregarded by designers. This is important, because the seismic design is usually not considered so relevant, as compared for instance with wind design, for these types ofstructures. The most relevant findings of this study are: 1) dynamic axial forces can have an increase of up to twice the static loading when the TFS is subjected to seismic demands, 2) large peak ground accelerations seem to be the key parameter for significant seismic-induced axial forces, but not clear trend is found to relate such forces with earthquakes and site characteristics and, 3) the inclusion or exclusion of the form-finding in the analysis procedure importantly affects results ofseismic stresses in the fabric, but not in the frame.

• Asia Marketing Journal
• /
• v.22 no.4
• /
• pp.63-78
• /
• 2021

In 2020, the unexpected pandemic scenario has led to a downfall of live concerts performances, after the government restriction for events and gatherings with a large number of people. The Korean-Pop (K-Pop) group BTS (Bangtan sonyeondan) also had their concert tour canceled in 2020. Therefore, the group came up with an innovative project to the music market, called "BangBangCon: The Live", a live streaming paid concert held by the group, on June 14^th, which achieved a Guinness World Record for most viewers during a paid music concert, in a live streaming format. It's important, then, to study this event, and initiate a debate about alternative ideas for marketing strategies with live streaming music performances. The method to accomplish this research was desk research, analysing all the communication delivered from BTS, studying the website and platform where the event "BangBangCon: The Live'' was held, and researching about the results the event has achieved. The results were the description of the event as a project, informing how many people have attended the event, and what were the marketing strategies that made it possible to become the highest audience to a paid live streaming concert, until the moment this article was published.

• Journal of Daesoon Thought and the Religions of East Asia
• /
• v.1 no.2
• /
• pp.61-87
• /
• 2022

This article compares the concepts of divine incarnation as expounded in Daesoon Thought and in Christianity and questions the essence of the divinity in both traditions. In Daesoon Thought, The Supreme God, Sangje, saw major disorganization leading to extreme violence and doom and decided to incarnate on earth under the human form of Kang Jeungsan (1871-1909). Then the living God taught the solution to human suffering through the revelations he sent in 1917 to Jo Cheol-Je, or Jo Jeongsan (1895-1958) and the revelations were passed on to Dojeon Park Wudang who in 1969 founded Daesoon Thought. In Christianity, God incarnated in his son, Jesus Christ, who allowed for the radical transformation of the condition of man through his physical sacrifice. Daesoon differs in that Sangje did not offer himself as sacrifice when he came on earth but reorganized the world and taught how to apply benevolence to establish the Earthly Paradise. The affirmation that Daesoon Jinrihoe is both monotheistic and polytheistic is then analyzed. If the concept of monotheism seems to differ vastly between the two traditions, it appears that biblical monotheism is itself relatively young in the history of world religions so that Christianity has ancient roots germane to those of Daesoon Jinrihoe. The article concludes on the originality of this religion: though it is built on Daoism, Buddhism and Confucianism, it has transformed their vision of the deity and of its message in a most convincing manner.