• Journal of the Korean Geographical Society
• /
• v.49 no.1
• /
• pp.18-31
• /
• 2014

In this study, the spatio-temporal patterns of salty wind by typhoon in Jeju Island and their damages to windbreak forests are examined. To investigate these patterns, field trips as well as analyses of meteorological data were conducted after the attack of typhoon BOLAVEN in late August, 2012. Collected data show that salty wind damage in windbreak trees by the typhoon was distinct in the southern and eastern coastal areas due to the southeasterly gusts with less precipitation. Most of trees including Japanese cedar (Cryptomeria japonica) within 8km from the coast as well as pine trees (Pinus thunbergii) along the coasts were damaged by salty water driven by the typhoon, but the magnitude of its damages and recovery rates of damaged vegetation varied by species. These results indicate that prediction and proactive activities for salty wind are needed to reduce its damages to local vegetation particularly before the arrival of a dry typhoon accompanying gusty wind.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.809-820
• /
• 2016

The goal of this study was to predict lamina yield from logs of different diameter for production of cross laminated timber. Log characteristics of red pine (Pinus densiflora) and Japanese cedar (Cryptomeria japonica), including diameter, length, volume, and defects were used for statistical and geometrical analyses, along with the lamina characteristics, including width, thickness, and defects. Based on the data obtained, the strong factors influencing the yield and grade of lamina from the two species were statistically evaluated. A geometrical approach was used for analysis of the yield from logs of given diameters. Statistical analysis showed that lamina yield was dependent on target lamina size but the grade of lamina was not related to any of the log characteristics. The suggested yield equations from the geometrical approach indicated an accuracy of less than 20% difference.

• Korean journal of applied entomology
• /
• v.44 no.2
• /
• pp.91-95
• /
• 2005

This study was conducted to investigate the morphological characteristics, overwintering sites and behavior for each stage of Oligota kashmirica benefica (Coleoptera: Sthphylinidae). Egg was oval type, yellow, 0.3 mm size. Larva exuviated 3 times and the last (3rd) instar, length 1.6 mm, wide 0.4 mm, became dermata pupa in soil. Adult was lightish dark-brown, and coriaceous forewing covered a half of abdomen. O. kashmirica benefca mainly overwinters with adult at Japanese cedar (Cryptomeria japonica) windbreaks of orchards, but it did not diapause in greenhouse during winter.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.246-258
• /
• 2012

Particulate matter deposited on leaf surfaces may cause erosion/abrasion of epicuticular wax and the malfunction of stomata. However, the deposition processes of particulate matter, such as elemental carbon (EC), has not been studied sufficiently in Asian forest ecosystems. Deposition processes for particulate ${SO_4}^{2-}$ and EC were studied in a Japanese cedar forest in Kajikawa, Niigata Prefecture, Japan, and in a dry evergreen forest and a dry deciduous forest in Sakaerat, Nakhon Ratchasima province, Thailand. The ${SO_4}^{2-}$ fluxes attributed to rainfall outside the forest canopy (RF), throughfall (TF), and stemflow (SF) showed distinct seasonalities at both sites, increasing from November to February at the Kajikawa site and in March/April at the Sakaerat site. Seasonal west/northwest winds in winter may transport sulfur compounds across the Sea of Japan to the Kajikawa site. At the Sakaerat site, pollutants suspended in the air or dry deposits from the dry season might have been washed away by the first precipitations of the wet season. The EC fluxes from RF and TF showed similar variations by season at the Kajikawa site, while the flux from TF was frequently lower than that from RF at the Sakaerat site. Particulate matter strongly adsorbed onto leaf surfaces is not washed away by rainfall and contributes to the EC flux. At the Kajikawa site, Japanese cedar leaf surfaces accumulated the highest levels of particulate matter and could not be neglected when calculating the total flux. When such leaf-surface particles were considered, the contribution of dry deposition to the total EC flux was estimated to be 67%, 77%, and 82% at the Kajikawa site, and at the evergreen and deciduous forests of the Sakaerat site, respectively. Leaf-surface particles must be included when evaluating the dry and total fluxes of particulate matter, in particular for water-insoluble constituents such as EC.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.169-178
• /
• 2020

This study aimed to compare the organic carbon stocks of Cryptomeria japonica and Chamaecyparis obtusa stands established under a similar-site environmental condition in South Korea. C. japonica and C. obtusa stands adjacent to each other from 13 representative regions were chosen to evaluate the carbon stocks of tree biomass, forest floor, and mineral soils. Mean stand ages were 45 years for C. japonica and 43 years for C. obtusa, respectively. Tree density was significantly lower in C. japonica (989 tree ha^-1) than in C. obtusa (1,223 tree ha^-1) stands, whereas diameter at breast height and dominant tree height values were significantly higher in C. japonica (27.4 cm and 20.4 m, respectively), compared with C. obtusa (23.9 cm and 17.9 m, respectively) stands. The total carbon stocks of tree biomass were linearly related with stand basal area (C. japonica: r² = 0.82; C. obtusa: r²= 0.92; P< 0.05), whereas stand density and site index were not correlated with the carbon stocks of tree biomass (P > 0.05). The carbon stocks of aboveground tree biomass were significantly higher in C. obtusa (117.7 Mg C ha^-1), compared with C. japonica (95.5 Mg C ha^-1) stands, whereas carbon concentration and stocks of the forest floor and mineral soil layers were insignificantly different between the C. japonica and C. obtusa stands. The results indicated that trees in C. obtusa stands sequestrated more carbon dioxide, compared with C. japonica stands, whereas carbon stocks in the forest floor and mineral soil layers were unaffected by stand development processes of the different tree species.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.97-106
• /
• 2024

Evaluating carbon (C) and nitrogen (N) inputs from litterfall is important for soil nutrient management to enhance forest productivity and to understand the mechanisms of nutrient cycling in forest ecosystems. This study was conducted to compare C and N inputs from litterfall components of Cryptomeria japonica D. Don an d Chamaecyparis obtusa Endlicher planted in adjacent sites in the Jinju Research and Experimental Forests in Gyeongsangnam-do, South Korea. Litterfall into litter traps was collected at three-month intervals between December 2020 and December 2021, and the C and N concentrations of the litterfall components were measured. Litterfall amounts were not significantly different between the plantations, except for reproductive litterfall components. Litterfall accumulation peaked between December and March. The litterfall C concentration in the needle and seed litterfall was significantly higher for C. obtusa than for C. japonica. By contrast, the C concentrations in needle and flower litterfall differed seasonally. The mean N concentration of needle litterfall was significantly higher in C. japonica (0.96%) and C. obtusa collected between June and September (1.01%) than in the other seasons (C. japonica: 0.43%; C. obtusa: 0.53%). Carbon and N inputs in both plantations were highest in needle litterfall collected from December to March and lowest in needle litterfall collected from June to September. Annual C input by litterfall was similar between the plantations (C. japonica: 3,054 kg C ha^-1 yr^-1; C. obtusa: 3,129 kg C ha^-1 yr^-1), whereas total N input was higher for C. japonica (46.93 kg N ha^-1 yr^-1) than for C. obtusa (25.17 kg N ha^-1 yr^-1). The higher N input in the C. japonica plantation than in the C. obtusa plantation was associated with the input of reproductive components. These results could be applied to improve stand-scale models of C and N cycling by litterfall components in C. japonica an d C. obtusa plantations.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.566-577
• /
• 2009

The modification of wood color occurs rapidly during the service period at indoor. It is crucial to investigate the characteristics of color change, chemical and microscopical modification of wood at indoor. Wood products made of Japanese cedar at different years were used for this work. The tests were performed in order to evaluate the degree of color change of wood surface, breakpoint of brightness from surface to inside of wood, chemical analysis with FT-IR, and microscopical characteristics using the LM and TEM. Surface color of cedar wood stored indoor were rapidly changed at early stage, particularly ${\Delta}a$ (yellow), and ${\Delta}b$ (red) values were steeply decreased for one year old indoor wood, ${\Delta}L$ (white) value was dropped until 5 years old indoor wood compared with control sample. Decrease of peaks related to polysaccharide and lignin was noticed, especially, lignin was severely degraded. Although degradation of cell wall limited only to surface layers of indoor wood, degradation pattern of indoor wood showed similar degradation pattern to natural weathering of wood during outdoor weathering or wood behavior under artificial UV irradiation.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.76-83
• /
• 2001

This study was carried out to clarify the mechanical behaviour of the earlywood and the latewood to the compressive load applied parallel to the grain. The results from the analysis of Japanese cedar wood (Cryptomeria japonica) were used to introduce a concept on stress-strain behaviour of the earlywood and the latewood. There was a significant differences in the mechanical behaviour of the earlyWood and the latewood. In the earlywood, the rate of cell wall upon annual ring was almost similar and the strain increased linearly with the stress increased. However, the rate of cell wall upon annual ring varied in the latewood and the strain of that increased curve-linearly with the stress increased. The longitudinal compression modulus of elasticity (MOE) variation by loading speed on latewood specimens and earlywood specimens shows no significant difference. The modulus of rupture (MOR) and MOE of latewood were about 4 times higher than those of earlywood.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.5-38
• /
• 2006

Although in Korea there are only three examples of wooden coffins being found in burial mounds - from the Daho-ri, Songhyun-dong, and Munyung tombs, in Japan data on the shape and structure of wooden coffins from the Gofun era is relatively abundant. The wooden coffins of the Gofun era of Japan can be classified into either the dugout log style or the combined boards style according to their method of manufacture. They can also be divided by shape, into such categories as the boat shape, the split bamboo shape, the box shape, and so on. The box shape category can be further divided into the assembled type and the nailed type, according to how the boards are put together. Japanese Umbrella Pine (Sciadopitys verticillata) was favored as coffin-wood in all ages, but during the later Gofun era easily obtained woods such as the Japanese cedar (Cryptomeria japonica) or the Hinoki Falsecypress (Chamaecyparis obtusa) were also used. The coffins found at Daho-ri and Songhyun-dong are similar to the Japanese dugout log style in shape and manufacture, while the king's and queen's coffins excavated at Munyung Tomb are seen to have had direct influence on the appearance of nailed coffins Japan. The coffin in Songhyun-dong 7th mound was originally a dugout log boat. It was probably used for practical reasons such as the bugproof, anti-corrosion qualities of camphor wood, not because of ideological reasons such as in a boat burial (in which the boat takes the deceased to the after world). Because the Changnyong region is inland, where camphor trees do not grow, using an already existing boat may have been the only way to procure a camphor-wood coffin. From historical circumstances, it may be inferred that the camphor trees were imported into Korea from Japan, between which there was much cultural exchange.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.27-32
• /
• 2002

We investigated the effect of polyethylene glycol(PEG) treatment of preservative treated green japanese cedar(Cryptomeria japonica) round posts on their preservative penetration and check formation during the air drying. The round rods were dip-treated in 10% preservative solution of Basilit CFK for 1 day, followed by application(3, 5, and 10 times) with 50% PEG-400 solution, and then dried for 30 days under natural conditions. The rate of preservative penetration into sapwood was a low by 23.2% without PEG treatment, whereas that was a high by about 51.2~64.5% with PEG treatment. From these results, it was assumed that PEG played an affirmative role in the penetration of preservative components loaded onto the surface of round rods by dipping. During the air drying, the formation of drying checks decreased significantly with increasing application times of PEG. Even though some drying checks in PEG treated rods were developed, the number and size of checks was reduced remarkably by PEG treatment. After 2 months of outdoor exposure, PEG treatment failed to reduce checking in preservative-treated rods whereas finishing of polyurethane resin lacquer after PEG treatment was significantly effective in preventing check development.