• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.7-10
• /
• 2006

Four programs, i.e. TRMM, ADEOS2, ASTER, and ALOS are going on in Japanese Earth Observation programs. TRMM and ASTER are operating well, and TRMM operation will be continued to 2009. ADEOS2 was failed, but AMSR-E on Aqua is operating. ALOS (Advanced Land Observing Satellite) was successfully launched on $24^{th}$ Jan. 2006. ALOS carries three instruments, i.e., PRISM (Panchromatic Remote Sensing Instrument for Stereo Mapping), AVNIR-2 (Advanced Visible and Near Infrared Radiometer), and PALSAR (Phased Array L band Synthetic Aperture Radar). PRISM is a 3 line panchromatic push broom scanner with 2.5m IFOV. AVNIR-2 is a 4 channel multi spectral scanner with 10m IFOV. PALSAR is a full polarimetric active phased array SAR. PALSAR has many observation modes including full polarimetric mode and scan SAR mode. After the unfortunate accident of ADEOS2, JAXA still have plans of Earth observation programs. Next generation satellites will be launched in 2008-2012 timeframe. They are GOSAT (Greenhouse Gas Observation Satellite), GCOM-W and GCOM-C (ADEOS-2 follow on), and GPM (Global Precipitation Mission) core satellite. GOSAT will carry 2 instruments, i.e. a green house gas sensor and a cloud/aerosol imager. The main sensor is a Fourier transform spectrometer (FTS) and covers 0.76 to 15 ${\mu}m$ region with 0.2 to 0.5 $cm^{-1}$ resolution. GPM is a joint project with NASA and will carry two instruments. JAXA will develop DPR (Dual frequency Precipitation Radar) which is a follow on of PR on TRMM. Another project is EarthCare. It is a joint project with ESA and JAXA is going to provide CPR (Cloud Profiling Radar). Discussions on future Earth Observation programs have been started including discussions on ALOS F/O.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2005년도 추계학술대회 및 한일 식물생명공학 심포지엄
• /
• pp.106-111
• /
• 2005

For breeding of a new rootstock for eggplant production, somatic hybrids between two species, Solanum integrifolium and S. sanitwongsei were obtained through protoplast fusion. The former species has been commonly used for rootstock for eggplant production in Japan. Eggplants on these rootstocks are more productive than ungrafted plants, but are susceptible to bacterial wilt caused Ralstonia solanacearum. While the latter species is resistant, the growth of eggplants on this rootstock is rather slow and low yield. Protoplast of both species were isolated from cotyledons, and inactivated with iodoacetamide or UV-irradiation, then fused electrically. The fused products were then cultured. Regenerated plantlets were then transplanted on soil then maintained in a green house. The plants were classified into four groups. Those in the first group showed morphological characters intermediate of the parentalspecies. The plants bore fruit with viable seeds. The plants showed a chromosome number of 2n=48, the sum of those of the parental species, and are suggested to be symmetric fusion products. While plants in the other groupswas less vigorous and showed chromosome number 2n= 68 to 72 suggesting asymmetric fusion products by genomic in situ hybridization(GISH). Isozyme pattern of shikimate dehydrogenase (SKDH; EC 1.1.1.25), isocitrate dehydrogenase (IDH; EC 1.1.1.41) and phosphoglucomutase (PGM; EC 2.7.5.1) showed that 24 regenerated plants in three groups were somatic hybrids. Analysis of random amplified polymorphic DNA (RAPD) showed that 43 S. integrifolium-specific and 57 S. sanitwongsei-specific bands were all found in 24 plants. Both somatic hybrids and its S1 plants were found to be resistant to bacterial wilt, and eggplant grafted these plants using for rootstocks were more productive than grafted mother plants. Now, S1 progenies are used for commercial eggplant production in Osaka Prefecture.

• 한국지리정보학회지
• /
• 제5권4호
• /
• pp.45-55
• /
• 2002

본 연구에서는 일본 사가시의 토지이용정보시스템 구축의 예를 살펴보고 도시계획분야에서의 GIS를 활용한 용도지역 지정과 토지이용분석 방법을 제안했다. 사가시의 도시계획정보시스템 데이터베이스는 1990년대 초반에 구축되어졌다. 건물데이터는 토지가옥조사도(1/1,000)를 디지타이징하여 입력하였으며, 1994년도 도시계획기초조사 데이터로부터 건물용도현황 및 용도지역 지정현황 등의 속성을 입력한 것을 사용했다. 그리고, 특화계수의 산출로 Saga시의 토지이용특성을 명확히 했으며 용도지역별로 특화범위를 비교했다. 또한, 건물용도별 및 용도지역별 관찰도수와 기대도수를 오버레이분석으로 산출하여 비교 분석한 결과 용도지역에 의해 건축물의 용도가 유도되고 있음을 알았다.

• 한국가스학회지
• /
• 제15권1호
• /
• pp.9-14
• /
• 2011

대형 디젤엔진은 주행거리가 길고 배기량이 크기 때문에 차량의 대수는 상대적으로 적지만 대기환경에 미치는 영향은 크다. 시내를 주행하는 시내버스의 경우 한일 월드컵을 계기로 CNG 버스로 전환되었다. 그러나 대형트럭과 장거리 시외버스의 경우 주행거리가 길고 CNG 충전소가 대도시의 시내버스 차고지 위주로 설치되어 있어 이용이 불가능하였다. 단열용기의 적용으로 천연가스를 압축상태가 아닌 액체 상태로 보관이 가능해져 주행거리가 긴 대형트럭이나 장거리 시외버스로의 적용이 가능해졌으며, 혼소엔진의 경우 LNG 충전이 어려운 지역에서는 디젤로 운행이 가능하다. 이와 같은 장점으로 인하여 석유 의존도를 크게 낮출 수 있어 에너지원의 다변화가 가능하며, 디젤차의 고질적인 단점으로 여겨왔던 매연 및 질소산화물뿐만 아니라 저탄소 연료를 사용함으로서 대표적인 온실가스중의 하나인 이산화탄소도 10%이상 저감할 수 있었다.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.194-202
• /
• 2013

In the modern society, phenomena such as a decrease in population and an increase in urban small houses caused by demographic changes, a decrease in midium-large housing constructions, and the concentration of one to two person families in the capital area cultivated ground for the growth of small house market. In response to these trends, interior coordination becomes a critical factor to be applied to the small houses in order to suit the residents' needs in most convenient, efficient and aesthetic ways. Therefore, an evaluation element is in demand to extract, evaluate and constantly improve the interior coordination elements. This study extracts and analyzes the essential elements required for small houses into spatial structure, system coordination and interior coordination. In domestic cases, most of spatial structure was conventional and linear while in foreign countries, various variations were found to reflect the needs from different consumers. For the system coordination, convenience played the most important role to emphasize on the easy use of digital system and built-in appliance system in domestic cases. However, in foreign countries, safety issue and economic aspects were the most considered when it comes to the interior coordination. In regard to interior coordination, installations of the storages for the limited small spaces that also support as extended spaces were rare to find in both cases for domestic and international settings. It is expected that systematic studies focused on more objective standards for interior coordination shall be implemented to provide indicators to measure the interior coordination cases in the near future.

• Environmental Engineering Research
• /
• 제18권2호
• /
• pp.85-90
• /
• 2013

This study is an attempt to quantify rainwater utilization and miscellaneous water demand in Tokyo's 23 special wards, the core of the urban area in Tokyo, Japan, in order to elucidate the potential of further rainwater utilization. The rainwater utilization for miscellaneous appropriate water demands, including toilet flushing, air conditioning, and garden irrigation, were calculated for six different types of building: residential house, office, department store, supermarket, restaurant, and accommodation. Miscellaneous water demands in these different types of building were expressed in terms of equivalent rainfall of 767, 1,133, 3,318, 1,887, 16,574, and 2,227 (mm/yr), respectively, compared with 1,528 mm of Tokyo's average annual precipitation. Building types, numbers and its height were considered in this study area using geographic information system data to quantify miscellaneous water demands and the amount of rainwater utilization in each ward. Area precipitation-demand ratio was used to measure rainwater utilization potential for miscellaneous water demands. Office and commercial areas, such as Chiyoda ward, showed rainwater utilization potentials of <0.3, which was relatively low compared to those wards where many residential houses are located. This is attributed to the relatively high miscellaneous water demand. In light of rainwater utilization based on building level, the introduction of rainwater storage mechanisms with a storage depth of 50 mm for six different types of buildings was considered, and calculated as rainfall of 573, 679, 819, 766, 930, and 787 (mm), respectively. Total rainwater utilization using such storage facilities in each building from 23 wards resulted in the retention of 102,760,000 $m^3$ of water for use in miscellaneous applications annually, and this volume corresponded to 26.3% of annual miscellaneous water demand.

• 한국위성정보통신학회논문지
• /
• 제11권2호
• /
• pp.42-47
• /
• 2016

최근 태양광, 에너지 저장 시스템 등의 발전으로 인해 가정에서 에너지 관리 시스템을 구축하고 에너지 생산을 스스로 하고자 하는 에너지 자립형 스마트 홈 시스템에 대한 연구가 활발해 지고 있다. 특히, 일본의 경우 후쿠시마 원전 사태 이후 전력망의 불안정성으로 인해 태양광을 통해 발전하고 이를 전력 에너지 저장 시스템에 저장하고 사용하는 가정용 시스템이 상용화되었다. 북미나 유럽에서도 태양광과 에너지 저장 시스템을 결합하여 신재생에너지 보급사업을 통해 보조금을 지급하면서 설치 가정을 확대하고 있다. 본 논문에서는 댁내 홈 네트워크를 통해 태양광과 에너지 저장 시스템을 연결하고 실시간 요금제에 기반을 둔 에너지 자립형 스마트 홈 시스템 개발에 대해 기술한다. 사용자의 개입을 최소화하면서 자동화된 운전으로 전력망으로부터의 에너지 사용을 최적화하여 에너지 자립형 홈을 구현하였다.

• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• 산업경영시스템학회지
• /
• 제40권3호
• /
• pp.83-91
• /
• 2017

Climate change has been identified as one with the greatest challenges facing nations, government, business and over future decades. Activities to reduce greenhouse gas emissions by the Kyoto Protocol, the international community has been in progress. Korea also has introduced the Emission trading system to reduce greenhouse emission from the supervision of the government. Greenhouse gases emissions quantity should be internationally recognized. Mutual Recognition Arrangement should be recognized as the same greenhouse gas emission. International recognition of domestic verification body of international mutual recognition is required. Efforts are needed to secure the equivalence between the emission rights through direct cooperation with the relative nation accreditation body. Early entry into the IAF/PAC GHG MLA is essential for demonstrating equivalence between greenhouse gas emissions. Emissions trading will also require connection to the EU ETS, California, USA, and Tokyo, Japan to link Emissions trading. In the case of establishing accreditation standards and accreditation criteria, it will be necessary to distinguish between the domestic Energy Target Management System and the Emission Trading System. Independent greenhouse gases verification bodies should be established to meet the requirements of IAF and PAC. It is necessary to revise the qualification criteria for the verification of the greenhouse gas verification body according to international standards requirements. It is necessary to support the role of accreditation bodies of domestic greenhouse gas verification bodies. It is required to join international organizations of international mutual recognition of international trade and the need for pilot projects to link greenhouse gas emissions. The core link to our emission trading system is called EU-ETS, and we will need to join the IAF/PAC GHG MLA GHG. The International Mutual Recognition Agreement (IAF) is expected to allow international interoperability of GHG emissions verification between EA and the PAC. By signing a PAC GHG MLA, it will need to be prepared to prepare for the pilot project to link the emission trading system.

• 디지털콘텐츠학회 논문지
• /
• 제19권1호
• /
• pp.123-131
• /
• 2018

힐링 공간의 디자인은 인간에게 기와 여유로움, 정신적 해방감을 제공한다. 지친 몸을 회복시키며 삶의 건장함을 제공해 준다. 힐링이란 의미와 외국의 사례 등을 통하여 힐링의 중요성과 가치를 확립하여 보았다. 인간이 자연에서 왔다가 자연으로 돌아가는 것은 지극히 필연적이라 생각되며, 살아가는 동안 목표를 세워서 조금씩 완성하고 극복해 나가는 과정을 끊임없이 계속하면서 큰 목표점에 도달하게 된다. 자연에서 온 만큼 자연의 분위기를 만들어 그 속에서 생활함으로써 치유의 효과를 누릴 수 있는 것이다. 건축의 내부에 목재를 사용하는 것이 가장 편안한 힐링의 조건이 되며, 일본의 사례에서도 알 수 있듯이 건축물의 외부 전체를 목재로 완성한 써니힐스의 건물은 마치 까치의 집을 연상케 하기도 한다. 실내의 책상이나 책장도 목재로 하여 보다 따뜻한 분위기를 연출하고 관엽식물을 심으면 힐링의 효과는 더욱 커진다. 천장에는 구름의 그림이나 나무, 해 등의 그림을 그리고 벽의 색은 기분을 차분하게 하는 파란색 계통이나 부드러운 핑크색을 적용하면 힐링의 효과는 배가된다. 본 연구를 통하여 힐링의 기본인 자연과 접하고 자연의 소재를 활용하여 생활공간을 형성하는 것이 힐링의 효과를 가져 올 수 있다는 것을 알 수 있었다.