• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.762-770
• /
• 2013

Korean military is currently using and operating a precision approach and landing system, called RAPCON (ASR/PAR), which is imported from overseas. However, drawbacks of this system are operational and cost problems that come along, e.g. straightness of the radio waves, limited ability of narrow searching, lack of interoperability, and high cost of installation and maintenance. Moreover, as the civilian air traffic control uses a similar system compared to the military, the so called DME/VOR/ILS, disturbance between these two systems triggered the consideration of GNSS as alternative system. In this paper, we conduct a research on trends in the field of precise approach and landing systems based on GNSS, analyze weaknesses of GNSS(jamming, fault) and consider possible solutions. Furthermore, we propose the precise approach and landing system based on GNSS to be used by the Korean military as we found it to be also suitable for military purposes. Finally, we examine the benefits of a domestic development with different focuses(development/cost of mass production/operational advantages and potential for increased performance).

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.524-530
• /
• 2022

When radar return contains strong jammers along with ground clutter echo, a STAP(space-time adaptive processing) algorithms tend to suppress jammer components more severely than it does the clutter. This hinders moving target detection in that the target echo is apt to be buried by clutter echo. This paper presents a two-step STAP algorithm in which the pre-suppression of jammer by the spatial filtering is applied, prior to applying the STAP algorithm. We propose how to find the coefficients of the spatial filter and show that the spatial filtering barely alter the spectra of the target and the clutter echo, having only to suppress the jammers. Finally, we simulate a STAP scenario with strong jammers and show the proposed algorithm can improve STAP performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.365-371
• /
• 2014

Chaos communication system is possible to improve the system security by using chaos signal. Further, it is possible to reduce the possibility of eavesdropping, and have strong characteristics from interference signal and jamming signal. However, BER(Bit Error Rate) performance of chaos system is worse than digital communication system. By this reason, researches in order to improve the BER performance of chaos communication system are being actively studied. In previous studies, we proposed a novel chaos map for BER performance improvement, and called it 'Boss map'. Also, we proposed a novel chaos transceiver for BER performance improvement. However, BER performance is evaluated differently according to delay time in transceiver. Therefore, in order to use Boss map effectively, we should find the optimal delay time in proposed chaos transceiver. In this paper, when Boss map is used, we evaluate BER performance of CDSK(Correlation Delay Shift Keying) system and novel chaos transceiver according to delay time. After evaluation of BER performance according to delay time, we find a delay time that is possible to have best BER performance in CDSK system and novel chaos transceiver.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.44-50
• /
• 2014

Chaos communication system is one of the security algorithms that is applied to improve the security. Chaos signal is non-linear, and it is generated randomly according to the initial conditions. Also, chaos communication system has characteristics such as non-periodic, wide-band, non-predictability of signals and easy implementation. So, security of chaos communication system is superior, and it has low interception probability and good anti-jamming characteristic. However, BER performance is worse than digital communication system, because it has many self interference signal in case of CDSK system. To improve these disadvantages, we analyze the PDF trend which can improve the BER performance in existing study, and we proposed a chaos map. And, proposed chaos map was defined as the 'Boss map'. Generally, BER performance is changed according to initial values, parameters and spreading factors. Therefore, in this paper, we will introduce PDF trends which can improve the BER performance, and will describe about Boss map. Also, characteristics of Boss map is analyzed by evaluating the BER performance of Boss map according to initial values, parameters and spreading factors. As a result, while maintaining the similar BER performance, initial value of Boss map can be selected from 0 to 1.2, and BER performance is best when parameter alpha is 2.5. Also, BER performance is best when spreading factor is 50.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1241-1249
• /
• 2011

There are TOA, TDOA and AOA method to estimate the position of the electromagnetic wave transmitter by using the multiple receivers at the fixed position. Among these methods, AOA method is suitable for the jammer localization system. Because TOA method can be adopted for the clocks of the transmitter and the receiver are synchronized each other, and TDOA method can be only adopted for a broad-band jamming signal. This paper, therefore, analyzes the characteristics of the AOA measurements and the sensitivity of the positioning performance according to the system design parameters. Based on the analyzed results, the jammer localization system to meet the desired performance is designed, and it has been checked that the positioning error for the jammer located at a distance of 10km is lower than 38m through the simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.514-520
• /
• 2015

Sidelobe canceller(SLC) requires main beam pattern(SUM beam) and auxiliary beam patterns for rejection of sidelobe noise jammer. For best performance of sidelobe noise jamming cancellation of adaptive SLC, gain dominant region of each auxiliary beam pattern shall not be overlapped one another in elevation/azimuth regions of sidelobe of main beam, and beam patterns of auxiliary channels should have low gains in regions of mainlobe of main beam. In the monopulse radar, the difference beam patterns for monopulse processing have these properties. This paper proposes the method using data from the difference channel for monopulse processing as data from auxiliary channel for sidelobe cancellation. For the proposed SLC, the results of simulation and performance analysis was presented. If the proposed method is used in the monopulse radar, SLC can be constructed by using basic SUM and difference channels without extra channel composition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.577-580
• /
• 2016

One of the effective jamming methods to disturb monopulse radars is a wavefront distortion. Most well-known wavefront distortion is the cross eye technique which uses two transmitters. The cross eye can make angle error regardless of monopulse radar structure but high accuracies of phase and amplitude between two transmitters should be needed to make large angle error. Thus, the accuracies of phase and amplitude are essentially required performance parameters for implementation of wavefront distortion systems and the required values of accuracy is dependant on amount of angle error. In this paper, we derive expressions for minimum required values of phase difference and amplitude ratio according to amount of angle error and analyze the results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1422-1430
• /
• 2016

Researches for oceans are limited to military purpose such as underwater sound detection and tracking system. Underwater acoustic communications with low-probability-of-interception (LPI) covert characteristics were received much attention recently. Covert communications are conducted at a low received signal-to-noise ratio to prevent interception or detection by an eavesdropper. This paper proposed optimal covert communication model based on direct sequence spread spectrum for underwater environments. Spread spectrum signals may be used for data transmission on underwater acoustic channels to achieve reliable transmission by suppressing the detrimental effect of interference and self-interference due to jamming and multipath propagation. The characteristics of the underwater acoustic channel present special problems in the design of covert communication systems. To improve performance and probability of interception, we applied BCJR(Bahl, Cocke, Jelinek, Raviv) decoding method and the direct sequence spread spectrum technology in low SNR. Also, we compared the performance between conventional model and proposed model based on turbo equalization by simulation and lake experiment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.51-56
• /
• 2017

With the rapid increase in the number of mobile terminals, demand for wireless technologies has sharply increased these days. While wireless communication provides advantages such as ease of deployment, mobility of terminals, continuity of session, and almost comparable transmission bandwidth to the wired communication, it has vulnerability to malicious radio attacks such as eavesdropping, denial of service, session hijacking, and jamming. Among a variety of methods of preventing wireless attacks, the MTD(Moving Target Defense) is the technique for improving the security capability of the defense system by constantly changing the ability of the system to be attacked. In this paper, in order to develop a resilient software defined radio communication testbed system, we present a novel MTD approach to change dynamically and randomly the radio parameters such as modulation scheme, operating frequency, packet size. The probability of successful attack on the developed MTD-based SDR communication system has been analysed in a mathematical way and verified through simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1388-1398
• /
• 2012

SAR(Synthetic Aperture Radar) systems can provide images of wide coverage in day, night, and all-weather conditions. However wideband SAR systems are known to be vulnerable to interferences from other devices operating at in-band or adjacent spectrums and this may lead to image corruptions. In this paper, a SAR point target simulator is developed that provides performance analysis on image distortion caused by interferences from other devices. Interference signals are generated based on the experimental data observed from acquired SAR raw data. Simulation results include typical SAR performance measures such as spatial resolution, peak to sidelobe ratio and integrated sidelobe ratio. Finally, SAR target simulations are performed and shown to correspond to the image corruptions found in real SAR missions affected by RF interferences.