• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.5
• /
• pp.57-72
• /
• 1999

Traditional theories of the tensile failure of paper have assumed that uniform strain progresses throughout the sheet until an imperfection within the structure causes a catastrophic break. The resistance to tensile elongation is assumed to be elastic , at first, throughout the structure, followed by an overall plastic yield. However, linear image strain analysis (LISA) has demonstrated that the yield in tensile loading of paper is quite non-uniform throughout the structure, Traditional theories have failed to define the flaws that trigger catastrophic failure. It was assumed that a shive or perhaps a low basis weight area filled that role. Studies of the fracture mechanics of paper have typically utilized a well-defined flaw around which yield and failure could be examined . The flaw was a simple razor cut normal to the direction of tensile loading. Such testing is labeled mode I analysis. The included fla in the paper was always normal to the tensile loading direction, never at another orientation . However, shives or low basis weight zones are likely to be at random angular orientations in the sheet. The effects of angular flaws within the tensile test were examined. The strain energy density theory and experimental work demonstrate the change in crack propagation from mode I to mode IIas the initial flaw angle of crack propagation as a function of the initial flaw angle is predicted and experimentally demonstrated.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.81.1-81.1
• /
• 2017

L1251B is an excellent example of a small group of pre- and protostellar objects in low-mass star-forming region. Previous interferometer data with a high angular resolution resolved the outflows associated with L1251B into a few components. To understand the physical conditions of the protostellar outflows in L1251B, we mapped this region spectroscopically with Spitzer/IRS and obtained spectral line data from Herschel/PACS. Spitzer/IRS provides the S(0)-S(7) pure rotational lines of H2 as well as fine-structure emissions produced in shocks such as S, [Si II], and [Fe II] and it is a powerful tool for studying shocked interstellar gas. In addition, [O I] lines observed with Herschel/PACS are described well by J-type shock models expected in the outflows from protostars. We will present an analysis of the L1251B protostellar outflow in the H2 pure rotational lines and fine-structure emissions.

• Journal of the Korean Society of Costume
• /
• v.52 no.3
• /
• pp.1-18
• /
• 2002

The purpose of this study is to investigate the relationship between costumes of court masque and the fashion trend at that time, by the analysis of the portraits. The period in this thesis is from Elizabeth I (1588-1603), until James I (1603-1625), when Inigo Jones was actively involved in court in masque, and when the traits of court masque began to appear in costume. The research material of this thesis is from the papers, costume design sketches, portraits and miniatures. As a result the costume of court masque which is the mixture of that of ancient Greece, Rome, middle age, and the exotic style of Ireland and Persian, had a great impact on the general fashion, and the unique pattern f costume became prevalent in the end of 16th and the early 17th century. This thesis might help us understand and special costume of that age and study the way how it come to have an influence on the fashion of the costume pertaining mainly to the privileged class.

• Journal of Life Science
• /
• v.7 no.4
• /
• pp.358-360
• /
• 1997

Soybean [Glycine max (L.) Merr.] seed size is a important yield component and is a primary consideration in the development of cultivars for specialty markets. Our objective was to examine the consistency of QTLs for seed size across generations. A 68-plant F$_{2} segregation population derived from a mating between Marcury (small seed) and PI 467.468 (large seed) was evaluated with RAPD markers. In the F$_{2} plant generation (i.e. F$_{3} seed), three markers, OPL09a, OPM)7a, and OPAC12 were significantly (P<0.01) associated with seed size QTLs. In the F$_{2} ; F$_{3} generation (i.e., F$_{4} seed), four markers, OPA092, OPG19, OPL09b, and OPP11 were significantly (P<0.01) associated with seed size QTLs. Just two markers, OPL09a, and OPL09b were significantly (P<0.05) associated with seed size QTLs in both generations. The consistency of QTLs across generations indicates that marker-assisted selection for seed size is possible in a soybean breeding program.

• Steel and Composite Structures
• /
• v.34 no.2
• /
• pp.171-188
• /
• 2020

The past research on cold-formed steel (CFS) flexural members have proved that rectangular hollow flanged sections perform better than conventional I-sections due to their higher torsional rigidity over the later ones. However, CFS members are vulnerable to local buckling, substantially due to their thin-walled features. The use of packing, such as firmly connected timber planks, to the flanges of conventional CFS lipped I-sections can drastically improve their flexural performance as well as structural efficiency. Whilst several CFS composites have been developed so far, only limited packing materials have been tried. This paper presents a series of tests carried out on different rectangular hollow compression flanged sections with innovative packing materials. Four-point flexural tests were carried out to assess the flexural capacity, failure modes and deformed shapes of the CFS composite beam specimens. The geometric imperfections were measured and reported. The North American Specifications and Indian Standard for cold-formed steel structures were used to compare the design strengths of the experimental specimen. The test results indicate clearly that CFS rectangular 'compression' flanged composite beams perform significantly better than the conventional rectangular hollow flanged CFS sections.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.640-645
• /
• 2010

This paper describes the power generating property of hydrothermally grown ZnO nanorods on a flexible polyethersulfone (PES) substrate. The piezoelectric currents generated by the ZnO nanorods were measured when bending the ZnO nanorod by using I-AFM, and the measured piezoelectric currents ranged from 60 to 100 pA. When the PtIr coated tip bends a ZnO nanorod, piezoelectrical asymmetric potential is created on the nanorod surface. The Schottky barrier at the ZnO-metal interface accumulates elecntrons and then release very quickly generating the currents when the tip moves from tensile to compressed part of ZnO nanorod. These ZnO nanorods were grown almost vertically with the length of 300-500 nm and the diameter of 30-60 nm on the Ag/Ti/PES substrate at $90^{\circ}C$ for 6 hours by hydrothermal method. The metal-semiconductor interface property was evaluated by using a HP 4145B Semiconductor Parameter Analyzer and the piezoelectric effect of the ZnO nanorods were evaluated by using an I-AFM. From the measured I-V characteristics, it was observed that ZnO-Ag and ZnO-Au metal-semiconductor interfaces showed an ohmic and a Schottky contact characteristics, respectively. ANSYS finite element simulation was performed in order to understand the power generation mechanism of the ZnO nanorods under applied external stress theoretically.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.118-130
• /
• 2017

During the landscape design process, landscape architects produce various forms of drawings to visualize the future designed landscape. This work thoroughly examines the process of the utilization of James Corner's theory and practice of representation. Since the early 1990s, Corner has explored the characteristics and functions of landscape architectural drawing theoretically. Specifically, Corner argued that the use of visual representation makes it difficult to achieve the full embodiment of all of the multisensory characteristics of a landscape. Thus, he explored new drawing techniques that alternatively visualize the landscape and generate creative ideas(i.e., imagination of drawing), rather than a realistic illustration of not-yet-actualized landscapes(i.e., instrumentality of drawing). Corner's theory has evolved throughout the mid and late-1990s as applied to landscape practice. Corner embraced ecology and implemented the theory and practice of Landscape Urbanism, thereby once again emphasizing the instrumentality of drawing. Whereas the early theory mainly explored a perspective view using collage and montage, Corner later began to stress the importance of the instrumentality again. For example, Corner employed a mapping technique based on the instrumental map and that simultaneously creatively transforms it. Corner's theory and practice of representation fully explored the identity of landscape architectural drawings and reflected the interaction between theory and practice. Thus, his design and theoretical works continue to have significant influence on present landscape practice and theory.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.4
• /
• pp.963-972
• /
• 1997

In imformation retrival, query reformulation algorithms construct querise from a set of intial input and feedback documents, and retrieval performance cna be varied by different sets of input documents. In this study, we developed a criterion for measuring the performance sensitivity of query reformulation algorithms to unput sets. In addition, we also propose a way of mesuring the changes in retrived area, (CIRA) during qucry reformulation. We cimpared CIRAs of query refromulation algorithms (i.e., query tree, DNF method, and Dillon's method) using three test sets:the CACM, CISI, and Medlars. In the experiments, the query tree showed the highest decreasing CIRA during refirmulations, which means the fastest convergence rate to an output set. For sensitivity analysis, the query tree sored the highest sensitivity to different input sets even though its differences to the tther algorithms are very small.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.2
• /
• pp.268-273
• /
• 2000

A 32-year-old woman complaining of cough, sputum, and chest discomfort for the past ten days was admitted to the hospital. The radiologic findings were transradiant left lung with reduced number and size of vessels, mediastinal shifting to the right at expiration, matched ventilation-perfusion defect on ventilation-perfusion scan, and diffuse hypoplasia of the left pulmonary artery and i1s branches on the pulmonary angiography. We describe a case of unilateral hyperlucent lung by main bronchus obstruction in a patient who presents a clinical picture suggestive of the Swyer-James syndrome.

• Journal of Food Hygiene and Safety
• /
• v.4 no.3
• /
• pp.165-170
• /
• 1989

To isolate the aflatoxin producing strains from agricultural products in Youngnam districts, rice(59), meju(30), corn(32), barley(58), soil(33), peanut(30), soybean(45), and unhulled barley(60) were collected from markets or homes. From 342 sample sources, 280 strains of Aspergillus spp. were isolated. As a result of screening by TLC, 29 strains expressed fluorescent spot and four strains have a same Rf value of standard aflatoxins, and the percentage of contamination from aflatoxin producing strains was 1.3%, and those strains were estimated as Aspergillus flavus group by the examine of characteristics and morphology.