• Steel and Composite Structures
• /
• v.28 no.2
• /
• pp.233-250
• /
• 2018

Back-to-back built-up cold-formed steel un-lipped channel sections are used in cold-formed steel structures; such as trusses, wall frames and portal frames. In such built-up columns, intermediate fasteners resist the buckling of individual channel-sections. No experimental tests or finite element analyses have been reported in the literature for back-to-back built-up cold-formed steel un-lipped channel sections and specially investigated the effect of screw spacing on axial strength of such columns. The issue is addressed in this paper. The results of 95 finite element analyses are presented covering stub to slender columns. The finite element model is validated against the experimental tests recently conducted by authors for back-to-back built-up cold-formed steel lipped channel sections. The verified finite element model is then used for the purposes of a parametric study to investigate the effect of screw spacing on axial strength of back-to-back built-up cold-formed steel un-lipped channel sections. Results are compared against the built-up lipped channel sections and it is shown that the axial strength of un-lipped built-up sections are 31% lesser on average than the built-up lipped channel sections. It was also found that the American Iron and Steel Institute (AISI) and the Australian and New Zealand Standards were over-conservative by around 15% for built-up columns failed through overall buckling, however AISI and AS/NZS were un-conservative by around 8% for built-up columns mainly failed by local buckling.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.345-352
• /
• 2007

Two-dimensional (2D) MT surveys near the Century mine in Australia have been performed with very far remote reference in Esashi, Japan (RR_ESS) as well as Gregory Downs (RR_GREG), which are roughly 6,400 km and 80 km apart from the survey area, respectively. Good quality of MT data could be obtained by remote reference processing with RR_GREG, while the coherency of magnetic fields between field sites and RR_ESS was not sufficient to be used as remote data. Both 2D and 3D inversion of 2D profile data represented the general geological structure beneath the survey area. The main target of the survey, Termite Range Fault, appeared as a boundary between a conductive block to the north and a resistive block to the south in the reconstructed resistivity section, and is inclined slightly to the north-east direction.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.503-507
• /
• 1998

Percutaneous absorption and model membrane variations of melationin (MT) in aqueous-based propylene glycol and $2-hydroxypropyl-{\beta}-cyclodextrin $vehicles were investigatted. the excised hairless mouse skin (HMS) and two synthetic ethylene vinyl acetate (EVA) and microporous polyethylene (MPE) were selected as a model membrane. the solubility of MT was determined by phase equilibrium study. the vertical $Franz{\circledR}$ type cell was used for diffusion study. The concentration of MT was determined using reverse phse HPLC system. The MT solubility was the highest in a mixture of PG and $2-HP{\beta}CD$. The percutaneous absorption of MT through excised HMS increased as the solubility increased. However, the permeability coefficient decreased and then slightly increased in mixture of PG and $2-HP{\beta}CD$. On the other hand, both flux and permeability coefficient through EVA membrane decreased as the solubility increased. No MT was detected over 12 h after starting diffusion through MPE membrane. The flux of MT was dependent on the type of membrane selected. Flux of MT was greatest in excised HMS followed by EBA and MPE membrane. Flux of MT through EVA membrane was 5-20 times lower when compared to excised HMS. Interestingly, volumes of donor phase when MPE membrane was used, significantly increased during the study period. the HMS might be applicable to expect plasma concentration of MT in human subjects based on flux and pharmacokinetic parameters as studied previously. the current studies may be applied to deliver MT transdermally using aqueous-based vehicles and to fabricate MT dosage forms.

• Archives of Pharmacal Research
• /
• v.27 no.2
• /
• pp.169-172
• /
• 2004

Activity-guided fractionation of the EtOAc-soluble extract of the stems of Couepia ulei, using a bioassay based on the induction of quinone reductase (QR) in cultured Hepa 1c1c7 mouse hepatoma cells led to the isolation of two active compounds, a new natural product, erythro-2,3-bis(4-hydroxy-3-methoxyphenyl)-3-ethoxypropan-1-o1 (1), and a known compound, evofolin-B (2), along with five inactive compounds all of known structure, viz., betulinic acid, oleanolic acid, pomolic acid, ($\pm$)-syringaresinol, and ursolic acid. These isolates were identified by analysis of physical and spectral data. Compounds 1 and 2 exhibited QR inducing activity, with observed CD (concentration required to double induction) values of 16.7 and 16.4 $\mu\textrm{M}$, respectively.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.149-161
• /
• 2020

This paper aims to explore the question of whether the environment in Korea where credit card use is prevalent affects the intention to accept Fintech-based mobile payment. The institution that encourages the credit card use such as credit card receipt obligation may lead to the lock-in and build infrastructures to influence the acceptance of new payment acceptance. This paper investigates how the perceived of use, usefulness, accessibility and stability affect the intention to use mobile payment based on the Technology Acceptance Model(TAM) model with the mediator of lock-in and moderator of credit card receipt obligation. In the results, we found that the perceived usefulness, perceived ease of use and accessibility positively impact on the intention of mobile payment usages. It is also observed that the usefulness and accessibility of credit cards positively mediate to the intention of mobile payment use.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.119-120
• /
• 2015

We report results of the measurement of the trigonometric parallax of an $H_2O$ maser source in IRAS 22555+6213 with the VLBI Exploration of Radio Astrometry (VERA). The annual parallax was determined to be $0.278{\pm}0.019$ mas, corresponding to a distance of $3.66^{+0.30}_{-0.26}kpc$. Our results confirm that IRAS 22555+6213 is located in the Perseus arm. We computed the peculiar motion of IRAS 22555+6213 to be ($U_{src}$, $V_{src}$, $W_{src}$) = ($0{\pm}1$, $-32{\pm}1$, $9{\pm}1$) $km\;s^{-1}$, where $U_{src}$, $V_{src}$, and $W_{src}$ are directed toward the Galactic center, in the direction of Galactic rotation and toward the Galactic north pole, respectively. IRAS 22555+6213, NGC7538 and Cepheus A lie along the same line of sight, and are within $2^{\circ}$ on the sky. Their parallax distances, with which we derived their absolute position in the Milky Way, show that IRAS 22555+6213 and NGC7538 are associated with the Perseus arm, while Cepheus A is located in the Local arm. We compared the kinematic distances of IRAS 22555+6213 derived with flat and non-flat rotation curve with its parallax distance and found the kinematic distance derived from the non-flat rotation assumption ($-32km\;s^{-1}$ lag) to be consistent with the parallax distance.

• Proceedings of the CALSEC Conference
• /
• 1999.07a
• /
• pp.215-231
• /
• 1999

CALS, Enterprise Integration, Virtual Enterprise 등을 구현하는데 있어서 BPR (business process re-engineering), ISP (Information Strategy Planning), Analysis/Design 등은 필수 적이다. 이러한 BPR, ISP, A/D 추진하는데 있어서 각 단계의 산출물은 유연하게 연계되지 못한다. 그 이유는 각 단계가 접근하는 초점이 다르고, 산출물의 성격이 다르며, 무엇보다도 각 단계의 전문가가 다르기 때문에 발생한다. 현재 기업이 각 단계를 추진할 때에는 반복적인 피드백을 통하여 정보를 공유하거나, 각 단계의 정보 연계가 제대로 이루어지지 않는다. 이러한 문제를 해결하기 위하여 BPR-ISP-A/D의 정보 연계를 유연하게 하기 위하여 PPO (Product-Process-Organization) 객체 진화에 의한 통합 방법론을 제안 하고자 한다. 그 과정은 1) Real world 정보를 PPO 객체로 정의하고, 2) PPO 객체를 기반으로 BPR을 수행하여 TO-BE model 을 만드는 동시에, 3) PPO TO-BE model과 함께 IT Architecture를 정의하며, 4) PPO 객체를 기반으로 Analysis and Design 과정을 통하여 Application system 객체 및 Data 객체를 정의한다. 이때 PPO 객체는 Real-world 객체에서 Application system 객체 및 Data 객체로 진화하게 되고 BPR-ISP-A/D의 seamless 통합이 이루어진다. 여기서, 단계 1) 과 2)는 System Engineering을 통하여 이루어진다. ARIS(Architecture of Integrated Information System, Dr. A-W. Scheer, 1998)개념을 도입하여 실세계를 정해진 규약에 따라 Model로 Mapping하고, 생성된 Model을 바탕으로 BPR을 수행하여 개선된 Model을 산출해 낸다. 단계 3)은, IE (Information Engineering, James Martine, 1990) 의 ISP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.1
• /
• pp.34-46
• /
• 2020

Computational assessment of gas-dynamic characteristics is explored for a three-dimensional counter-flow thrust vector control system in a rectangular supersonic nozzle. This convergent-divergent nozzle is designed by Method of Characteristics and its design Mach number is specially set as 2.5. Performance variations of the counter-flow vector system are illustrated by varying the gap height of the secondary flow duct. Key parameters are quantitatively analyzed, such as static pressure distribution along the centerline of the upper suction collar, deflection angle, secondary mass flow ratio, and resultant thrust coefficient. Additionally, the streamline on the symmetry plane, three-dimensional iso-Mach number surface contour, and three-dimensional turbulent kinetic energy contour are presented to reveal overall flow-field characteristics in detail.

• Journal of The Korean Astronomical Society
• /
• v.50 no.1
• /
• pp.7-20
• /
• 2017

We carry out the study of $850{\mu}m$ sources in a part of the XMM-LSS field. The $850{\mu}m$ imaging data were obtained by the SCUBA-2 on the James Clerk Maxwell Telescope (JCMT) for three days in July 2015 with an integration time of 6.1 hours, covering a circular area with a radius of 15'. We choose the central area up to a radius of 9'.15 for the study, where the noise distribution is relatively uniform. The root mean square (rms) noise at the center is 2.7 mJy. We identify 17 sources with S/N > 3.5. Differential number count is estimated in flux range between 3.5 and 9.0 mJy after applying various corrections derived by imaging simulations, which is consistent with previous studies. For detailed study on the individual sources, we select three sources with more reliable measurements (S/N > 4.5), and construct their spectral energy distributions (SEDs) from optical to far-infrared band. Redshift distribution of the sources ranges from 0.36 to 3.28, and their physical parameters are extracted using MAGPHYS model, which yield infrared luminosity $L_{IR}=10^{11.3}-10^{13.4}L_{\odot}$, star formation rate $SFR=10^{1.3}-10^{3.2}M_{\odot}yr^{-1}$ and dust temperature $T_D=30-53K$. We investigate the correlation between $L_{IR}$ and $T_D$, which appears to be consistent with previous studies.

• Journal of the Korean Ceramic Society
• /
• v.56 no.3
• /
• pp.211-232
• /
• 2019

Porous ceramics are promising materials for a number of functional and structural applications that include thermal insulation, filters, bio-scaffolds for tissue engineering, and preforms for composite fabrication. These applications take advantage of the special characteristics of porous ceramics, such as low thermal mass, low thermal conductivity, high surface area, controlled permeability, and low density. In this review, we emphasize the direct foaming method, a simple and versatile approach that allows the fabrication of porous ceramics with tailored microstructure, along with distinctive properties. The wet foam stability is achieved under the controlled addition of amphiphiles to the colloidal suspension, which induce in situ hydrophobization, allowing the wet foam to resist coarsening and Ostwald ripening upon drying and sintering. Different components, like contact angle, adsorption free energy, air content, bubble size, and Laplace pressure, play vital roles in the stabilization of the particle stabilized wet foam to the porous ceramics. The mechanical behavior of the load-displacements curves of sintered samples was investigated using Herzian indentations testes. From the collected results, we found that microporous structures with pore sizes from 30 ㎛ to 570 ㎛ and the porosity within the range from 70% to 85%.