• 제목/요약/키워드: JP-7 fuel

검색결과 7건 처리시간 0.017초

스크램제트 연료로써 JP-7 의 점화 특성 (Ignition Characteristics of JP-7 as a Scramjet Fuel)

  • 최정열
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제24회 춘계학술대회논문집
    • /
    • pp.377-380
    • /
    • 2005
  • 산소 및 공기와 반응시 크랙된 JP-7 연료의 점화 특성에 관한 연구를 넓은 범위의 압력(1-20atm)과 온도(1200-2000K), 당량비(0.5-1.5)에 대해서 수행하였다. Chemkin-II Package와 최소 자승법을 이용하여 $\tau=Aexp(E/RT)[F]^{a}[O_2]^{b}$형태로 점화 지연시간을 계산하고 각 변수 사이의 상호관계를 검증하였다. 크랙된 JP-7 연료에서 $C_3$ 탄화수소 계열 성분의 영향을 두 가지 다른 크랙된 JP-7연료의 조성에 대하여 점화지연 시간을 비교하였으며, 액체 JP-7 연료의 점화 지연 시간과도 비교하여 보았다.

  • PDF

보조동력장치 비상연료 시험 (Auxiliary Power Unit Emergency Fuel Test)

  • 임병준;이동호;구현철;류세현
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.908-911
    • /
    • 2011
  • 항공기에 사용되는 보조동력장치는 주연료(JP-8) 뿐 아니라 비상시 운용을 위하여 규정된 비상연료를 사용하여 운용이 가능하여야 한다. 이러한 요구조건을 입증하기 위하여 상용 디젤유에 대하여 비상연료 시험을 수행하였다. 디젤유의 경우, 시험 전, 후 부하조건에 따른 비연료소모율의 차이는 3.5%~7.8%로 요구조건을 만족하였다. 주연료와 비교하여 디젤유 적용에 따른 시동특성은 유사하였다. 비연료소모율은 부하조건의 변화에 따라 주연료 대비 2.0%~3.4%의 차이가 발생하였다.

  • PDF

Induction Parameter Modeling을 이용한 열 분해된 JP-7 연료 /산소 혼합기의 데토네이션 파 해석 (Detonation Wave Simulation of Thermally Cracked JP-7 Fuel/Oxygen Mixture using Induction Parameter Modeling)

  • 조덕래;신재렬;최정열
    • 한국항공우주학회지
    • /
    • 제37권4호
    • /
    • pp.383-391
    • /
    • 2009
  • JP-7/산소 혼합기의 데토네이션 파 특성을 상세 반응 기구로부터 얻은 일 단계 유도 변수 모델을 (IPM) 이용하여 살펴보았다. 탄화수소 혼합기에 대한 상세 화학 반응 모델로 부터 신뢰할 만한 일 단계 반응 모델을 얻기 위한 일반적 과정을 본 연구에서 제시하였다. IPM은 상세 반응 모델 라이브러리로부터 획득한 유도 시간 데이터베이스를 재구성하여 얻었으며, 상세 반응 모델에 의한 결과와 비교하여 확인하였다. 이후 IPM을 유체역학해석 코드에 적용하였으며, 데토네이션 파 전파에 대한 수치해석에 이용하였다. 수치해석 결과는 탄화수소 연료 연소의 상세 반응 기구를 직접 적용해서는 가능하지 않은, JP-7/산소 혼합기의 데토네이션 파 전파 특성의 상세한 특징을 보여주었다.

Determination of trace icing Inhibitors (ether type) in free-floating fuels by gas chromatography-mass spectrometry

  • Shin, Ho-Sang;Ahn, Hye-Sil;Jung, Dong-Gyun
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
    • /
    • pp.196-200
    • /
    • 2003
  • A gas chromatography/mass spectrometric assay method was developed for the simultaneous determination of ethylene glycol monomethyl ether (EGME) and diethylene glycol monomethyl ether (DEGME) in spilled aviation fuels. Ethylene glycol monobutyl ether (EGBE) and ethylene glycol monoethyl ether (EGEE) were used as internal standard and surrogate, respectively. The sample preparation consists of back-extraction with 7 mL of methylene chloride after extraction of 50 mL of fuel with 2 mL of water. The extract was concentrated to dryness and dissolved with 100L of methanol and analyzed by CC-MS (SIM). The peaks had good chromatographic properties by using semi-polar column and the extraction of these compounds from fuel also gave high recoveries of 75 and 85 % with small variations for EGME and DEGME, respectively. Method detection limits were 1.3 ng/mL for EGME and 1.0 ng/mL for DEGME in spilled fuel. The method may be useful for fuel-type differentiation between kerosene and JP-8, which may originate from the storage tank.

  • PDF

X-51의 PWR X-1 탄화수소 연료 스크램제트 엔진 핵심 기술 고찰 (Survey on the Core Technologies of Hydrocarbon-fueled PWR X-1 Scramjet Engine for X-51)

  • 노진현;원수희;최정열
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제30회 춘계학술대회논문집
    • /
    • pp.303-306
    • /
    • 2008
  • 미국은 X-43A 를 통한 스크램제트 무인기의 비행 시험을 성공적으로 마치고 미공군 주도하에 X-51A 스크램제트 기술 실증기를 개발하고 있다. X-51A는 PWR 사의 X-1 탄화수소 연료 스크램제트 엔진을 이용하여 2008년에 지상시험을 마치고 2009년에 비행시험이 계획되어 있으며, 이를 통하여 X-51A에서 확립된 기술은 향후 DARPA의 Falcon 프로그램에 의한 HTV-3X 극초음속 시험기 및 HCV 순항기 개발에 적용될 것이다. 본 논문에서는 액체 및 초임계 JP-7 연료를 이용한 엔진 구조물의 냉각 및 연소 등 X-51의 추진기관 핵심 기술에 대하여 살펴보고자 한다.

  • PDF

Heat Transfer Analysis for Endothermic Reacting Fluids

  • Kimura, Hiroyuki
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년 영문 학술대회
    • /
    • pp.346-357
    • /
    • 2008
  • Endothermic fuels are known as a probable fuel for hypersonic atmospheric flight vehicles and advanced propulsion systems, as well as cryogenic fuels. Especially, from the standpoint of the advanced regenerative cooling use, they are quite useful as a coolant fuel because of their large heat sink due to their chemical decompositions; so-called endothermic cooling effect. However, no heat transfer equations have been proposed taking into account such endothermic reactive behaviors concretely. This paper describes an analytical method for evaluation of the heat transfer rates between endothermic reacting coolant fuel and coolant-side wall in the regenerative cooling passages. Heat transfer mechanism is indicated based on a classical transport-phenomenological approach. A new relational expression of Nusselt number ratio for forcedconvective heat transfer with such endothermic reactions is also proposed by theoretical approaches using some classical hypotheses. Its applicability is assessed provisionally by comparison with confirmed results of heated tube tests for supercritical JP-7 fuel carried out at NASA Lewis Research Center, using its heat sink characteristics evaluated by United Technologies Research Center(UTRC). As a result, it has been suggested that the proposed relational equation is applicable to the evaluation of enhancement of Nusselt numbers due to such reactions in developed turbulent flows such as in the regenerative cooling passages.

  • PDF

군사부문 온실가스 배출량 산정에 관한 연구 (A Study on the Estimation of GHGs Emission by Military Sector)

  • 송기봉;최상진;김정;장영기
    • 한국기후변화학회지
    • /
    • 제8권2호
    • /
    • pp.177-186
    • /
    • 2017
  • In this research, we have developed standardized procedures for preparing of emission inventories on military sector. The procedures are as follows; 1) Identify all relevant emission sources list of military sector in Republic of Korea. 2) Select methods to estimate GHGs emissions by source categories such as heating boilers, tactical vehicles, military vessels and military aviation from US EPA, IPCC, EEA/EMEP, and ROK Ministry of Environment. 3) Identify and select data sources for activities and parameters from Korea annual oil statistics and Korea Procurement system. 4) Compare with each GHGs emission used by each activities. The conclusive results utilized by emission source categories and associated factors are described as follows; In 2013, GHGs was estimated 2,656 kilotons $CO_2-eq$ emitted by military sector. The diesel combustion contributed from a minimum of 43.8% to a maximum of 50.2% and JP-8 contributed from a minimum of 43.7% to a maximum of 52.8% to the 2001~2015 GHGs emission trend. In the result of comparing GHGs emissions with Korea Annual Oil Statistics (Tier 1) and supplied fuel through the Korea Procurement System (Tier 2) in 2015, the total GHGs emission was 2,867 kilotons $CO_2-eq$ estimated by Tier 2 is similar to the emission estimated by Tier 1. However, this reveals that the GHGs emission separated by local areas were a lot of different from Tier 1 and 2. The cause of difference between Tier 1 and Tier 2 was that Korea annual oil statistics utilized data from a fuel supplier. The data does not reflect the reality of the location of end user.