• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.133-138
• /
• 2007

The balance shaft housing in the recent engines tends to have the high cycle fatigue crack caused by increased engine power. In this paper, a CAE procedure is introduced to predict the durability of the balance shaft housing. The procedure is performed through two analysis steps. In the first step, the multibody dynamic simulation is used to obtain more accurate loading boundary conditions applied to the finite element model for the following step. Next, the finite element analysis is performed to predict the durability of the balance shaft housing through the calculation of the safety factor. Through this CAE procedure, the revised balance shaft housing was developed to improve the durability. And the durability of the housing was confirmed experimentally.

• Korean journal of food and cookery science
• /
• v.10 no.4
• /
• pp.363-368
• /
• 1994

The study was carried out to investigate the proximate composition, amino acids, dietary fiber, ascorbic acid and minerals contents of seven edible wild vegetables; an Evening Primerose($S_1$), a Spiderwort($S_2$), the Flower of a Convolvulus($S_3$), So Ru Jaeng Yi($S_4$), Shoe Bi Rum($S_5$), O Yi Pul($S_6$), Jip Sean Na Mul($S_7$). Results as summarized as follows: 1. The moisture contents of samples were determined as 64.43~88.30% The largest amount of them was contained in a Spiderwort($S_2$) and the smallest was in a Jip Sean Na Mul($S_7$), 2. The crude protein contents of samples were determined as 2.71~8.10%. The largest amount of them was contained in a O Yi Pul($S_8$), the smallest was in the Spiderwort($S_z$). 3. A relatively large amount of total amino acids were determined in samples. The abundant amino acids existed in the samples were Glutamic acid(10%), Lysine(8%), Leucine(8%) and the content of Methionine was very low. The highest level of them was found in the Convolvulus($S_3$), 4,419.6 mg% and the lowest was Shoe Bi Rum($S_5$), 2,393.1 mg% 4. The Ascorbic acid contents of samples was determined as 55.99~31.8O mg. The highest level of them was found in the Jip Sean Na Mul($S_7$) and the smallest was in the Primerose($S_1$) 5. The mineral contents of samples were determined. A relatively large amount of K, Ca and Mg were found in the samples. Especially the level of Iron was higher than that of any other vegetables. 6. The contents of dietary fiber were determined as 31.8~79.9%. The highest level of them was found in the Convolvulus($S_3$) and the lowest was in the Spiderwort($S_2$). The highest level of them was found in the Convolvulus($S_3$) and the lowest was in the Spiderwort($S_2$). From the above mention, we can say that the contents of protein, fat, fiber, total amino acids and iron were abundant in wild grasses than that of any other wild and cultured vegetables. The contents of ascorbic acid, potassium, calcium and magnesium were similar and the moisture is significantly low compared with any other vegetables.

• Journal of Korean Institute of Industrial Engineers
• /
• v.12 no.2
• /
• pp.57-65
• /
• 1986

In the design and operation of Flexible Manufacturing Systems (FMSs), it is useful to have a tool with which one can evaluate system's performances under various conditions. As one of such tools, this study chooses the Linearizer algorithm which uses mean value analysis (MVA). Linearizer algorithm is known to be the most accurate one among the MVA based heuristic algorithms yet developed. Though, up until now, the method is solely used to evaluate computer system's performances, this study shows that the Linearizer algorithm can be adapted for FMSs and still produces accurate solutions. Numerical examples for various classes of FMSs are presented and compared with the results from other methods and simulations.

• The Korean Journal of Applied Statistics
• /
• v.18 no.2
• /
• pp.395-410
• /
• 2005

For the analysis of large tables formed by many categorical variables, we suggest a method to group the variables into several disjoint groups in which the variables are completely associated within the groups. We use a simple function of Kullback-Leibler divergence as a similarity measure to find the groups. Since the groups are complete hierarchical sets, we can identify the association structure of the large tables by the marginal log-linear models. Examples are introduced to illustrate the suggested method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.1 s.244
• /
• pp.32-40
• /
• 2006

A linear acoustic analysis has been performed to elucidate damping characteristics of acoustic cavities in a liquid rocket combustor. Results have shown that resonant frequencies of acoustic cavity obtained by classical theoretic approach and by the present linear analysis are somewhat different with each other. This difference is attributed to the limitation of the simplified classical theory. To quantify the damping characteristics, acoustic impedance has been introduced and resultant absorption coefficient and conductance have been evaluated. Satisfactory agreement has been achieved with previous experiment. Finally the design procedure for an optimal tuning of acoustic cavity has been established.

• Natural Product Sciences
• /
• v.21 no.4
• /
• pp.289-292
• /
• 2015

Intensive chemical investigation of Korean marine sponge Spongia sp. has led to the isolation of two new scalaranes. The planar structures of the new compounds 1 and 2 were determined through 1D and 2D NMR spectral data analysis, while the relative stereochemistry of the compounds was determined based on the analysis of $^1H-^1H$ coupling constants and NOESY spectroscopic data. Compounds 1 and 2 did not display any significant biological activities on farnesoid X-activated receptor (FXR) in co-transfection assay.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.1
• /
• pp.171-177
• /
• 2002

The viscoelastic dampers are considered to be one of the most efficient means of upgrading existing structures against seismic loads. Generally in the dynamic analysis of a structure with added viscoelastic dampers the internal forces of the dampers are represented by constants that are linearly proportional to displacement and velocity. The purpose of this study is to verify the validity of the linear Kelvin model by comparing the results from the linear analysis with those obtained from the more rigorous nonlinear model such as fractional derivative model. According to the results the structural responses of 1-DOF structure obtained using the linear model are very close to those obtained from nonlinear model. However for multi-D0F structure the difference between the results from both models is enlarged as a results of the assumptions associated with the linear modeling of the viscoelastic dampers.

• The Journal of Information Systems
• /
• v.31 no.1
• /
• pp.115-146
• /
• 2022

Purpose The purpose of this study is to find meaningful insights using regression analysis to resolve the digital divide between generations. In the analysis process of this study, social network analysis was applied to approach it with a perspective differentiated from the existing statistical techniques. Design/methodology/approach This study used a social network analysis methodology that transforms and analyzes government-led survey data into relational data. First, the cross-sectional data were converted into relational data, and a continuous core-periphery model and multidimensional scaling method were applied. Afterwards, the relationship between various factors affecting the digital divide and the difference in influence were analyzed by generation. Findings According to the network analysis results, it can be seen that all generations commonly use 'information and news search' and 'living information service'. However, it can be seen that the centrally used services of each generation are clearly different from each other, and the degree of linkage between the services is also clearly different. In addition, it can be seen that the relationship between factors influencing the digital divide by generation is also different.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.2
• /
• pp.115-133
• /
• 2015

This paper describes an approach for the numerical analysis of container ship slamming and whipping and various parameters that influence slamming and whipping. For validation purposes, the numerical analysis results were compared with experimental results obtained as part of the Wave-Induced Loads on Ships Joint Industry Project. Water entry problems for two-dimensional (2D) sections were first solved using a 2D generalized Wagner model (GWM) for various drop conditions and geometries. As the next step, the hydroelastic numerical analysis of a 10,000-TEU container ship subjected to slamming and whipping loads in waves was performed. The analysis method used is based on a fully coupled model consisting of a three-dimensional (3D) Rankine panel model, a 3D finite element model (FEM), and a 2D GWM, which are strongly coupled in the time domain. Parametric studies were carried out in both numerical and experimental tests with various forward speeds, wave heights, and wave periods. The trends observed and the validity of the numerical analysis results are discussed.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.167-171
• /
• 2003

Acoustic characteristics of baffled combustion chamber to elucidate suppressing effect of baffle on combustion instability are numerically investigated by linear acoustic analysis. A hub-blade baffle of 5 blades is selected as a candidate one and five variants of baffles with various configuration are designed. Resonant-frequency shift and damping factor are analyzed quantitatively as damping parameters. When the hub is located radially at the pressure node, the decrease of resonant frequency and increase of damping factor in 1R mode are dominant. But sub-1T mode is formed within hub, therefore, there would be a possibility of initiating 1T mode in unbaffled region, which would occur another problem. For smaller hub size, four kinds of axial baffle length is selected. As the axial baffle length increases, resonant frequency shift and increase of damping factor of transverse acoustic modes is obtained. Especially, two close acoustic modes such as 1L and 1T could be overlapped for a certain axial length, resulting in extreme increase of damping factor. The present study based on linear acoustic analysis is expected to be a useful confirming tool to predict acoustic field and design a passive control devices such as baffle and acoustic cavity.