• Journal of Korea Foresty Energy
• /
• v.24 no.2
• /
• pp.24-30
• /
• 2005

Four compounds, (+)-catechin (1), (-)-epicatechin (2), myricitrin (3), and hinokiflavone (4), were isolated from the needles of Juniperus occidentalis Hook. The structures of the isolated compounds were established by NMR and MS spectrometer. The antioxidant activity of the isolated compounds was determined by measuring free radical scavenging activity with DPPH and the results indicated that compound 1, 2, and 3 showed better activity than the controls, while compound 4 had weak activity compared with ${\alpha}-tocopherol$, BHT, and curcumin.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2008

The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situation including the worst case such as rollover, spin-out and so on. Although the known NHTSA J-turn and Fish-hook steering maneuvers are applied for the vehicle performance assessment, they aren't enough to estimate other possible worst case scenarios. Therefore, it is crucial for us to verify the various worst cases including the existing severe steering maneuvers. This paper includes the procedure to search for other useful worst case based upon the existing worst case scenarios mentioned above and its application in simulation basis. The only human steering angle is selected as a design parameter here and optimized to maximize the index function to be expressed in terms of either roll angle or yaw rate. The obtained scenarios were enough to generate the worst case to meet NHTSA worst case definition (ex.2-inch wheel lift). Additionally, as an application, the worst case steering maneuver is acquired for the vehicle to operate with a simple ESP system. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for a vehicle system both with an intelligent safety control system and without it.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.83-94
• /
• 1994

Performance test result on prototype car equipped with low-band type active suspension system is reported. Control theory is explained first. Simulation for feasibility and parameter tuning, control module test using hydraulic exciter and test run, and performance evaluation of the test car on test track are reported successively. Emphasis was put on modification of control theory which caused many unexpected problems in actual implementation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.73-82
• /
• 1994

Low-band type active suspension system is implemented on a passenger car. Level. roll, pitch and bouncing motion of body are controlled by a digital controller. Sky-hook damper is applied to control bouncing motion. This paper describes overall construction of the system, design of hydraulic system, sensor system, controller, and control scheme. Performance of prototype car has been evaluated on a test track and reported in the second paper.

• Journal of agricultural medicine and community health
• /
• v.4 no.1
• /
• pp.62-70
• /
• 1979

In order to evaluate the present status of hook-worm infection in the rural areas in Korea, stool examinations were undertaken in several selected rural villages in each year of 1970 and 1977. The methods employed were cellophane thick smear technique and brine floatation technique in 3,454 specimens collected from 7 different rural villages for the prevalence rate of hookworm infection and Stoll's dilution egg counting technique for the intensity of hookworm infection. The incidences of Ancylostoma duodenale and Necator americanus infections were determind by polyethylene tube coproculture and by the evacuated adult worms after treatment with anthelmintics to the patients who were infected by hookworms. The results are as follows : 1) In 1970, 323(18.6%) out of 1,737 specimens collected from 4 different rural areas were positive for hook worm infection and the ranges of prevalence rates in those suveyed areas were shown as 6.9 to 38.2 per cent. On the other hand, 144(8.2%) out of 1,717 specimens collected from 3 different rural areas in 1977 were shown as positive for hookworm infection and 7.5 to 10.6 per cent of prvalence rates were shown in the surveyed areas. 2) In the age group under 10 years, there was no infection of hookworm in the studied areas in 1977, however in 1970 the prevalence of the hookworm infection was shown as very low in the age group of 5~9. On the whole, the hookworm prevalence steadily increased from the age of 15 in the studied areas in 1970, however in 1977 the prevalence increased from the age of 20 to the older age groups. 3) There was not observed much differences in the intensity of hookworm infection among the studied areas in 1970 and 1977. The mean EPG in each studied areas were shown under 1,000 EPG and mean numbers of evacuated worms per infected persons were counted as 9.4 to 15. 1. 4) Both A.duodenale and N.americanus have been found in all studied areas but the incidences and st-ate of distribution of two species of hookworn were shown as different in each localities.

• Steel and Composite Structures
• /
• v.38 no.5
• /
• pp.599-615
• /
• 2021

The ultimate strength behaviour of sandwich composite beams with J-hooks and normal weight concrete (SCSSBJNs) are studied through two-point loading tests on ten full-scale SCSSBJNs. The test results show that the SCSSBJN with different parameters under two-point loads exhibits three types of failure modes, i.e., flexure, shear, and combined shear and flexure mode. SCSSBJN failed in different failure modes exhibits different load-deflection behaviours, and the main difference of these three types of behaviours exist in their last working stages. The influences of thickness of steel faceplate, shear span ratio, concrete core strength, and spacing of J-hooks on structural behaviours of SCSSBJN are discussed and analysed. These test results show that the failure mode of SCSSBJN was sensitive to the thickness of steel faceplate, shear span ratio, and concrete core strength. Theoretical models are developed to estimate the cracking, yielding, and ultimate bending resistance of SCSSBJN as well as its transverse cross-sectional shear resistance. The validations of predictions by these theoretical models proved that they are capable of estimating strengths of novel SCSSBJNs.

• Journal of the Korean Mathematical Society
• /
• v.60 no.5
• /
• pp.1073-1085
• /
• 2023

A partition of n is called a t-core partition if none of its hook number is divisible by t. In 2019, Hirschhorn and Sellers [5] obtained a parity result for 3-core partition function a3(n). Motivated by this result, both the authors [8] recently proved that for a non-negative integer α, a3αm(n) is almost always divisible by an arbitrary power of 2 and 3 and at(n) is almost always divisible by an arbitrary power of pji, where j is a fixed positive integer and t = pa11pa22···pamm with primes pi ≥ 5. In this article, by using Hecke eigenform theory, we obtain infinite families of congruences and multiplicative identities for a2(n) and a13(n) modulo 2 which generalizes some results of Das [2].

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.2
• /
• pp.157-164
• /
• 2009

The National Fisheries Research and Development Institute (NFRDI) conducted a circle hook experiment to compare the catch rates of target and bycatch species between J hook and circle hooks in the tuna longline fishery of the Eastern Pacific Ocean, which is located between $9^{\circ}13'S-1^{\circ}36'N$ and $126^{\circ}00'-138^{\circ}21'W$. Sampling was conducted from September 20 to October 23, in 2006. In this survey, we collected shark data to obtain the ratio of fin weight to body weight of sharks. Overall, 413 sharks belonging to 9 species were caught on 62,464 hooks. The total weight of the sharks caught was 11,093 kg. The ratio of wet fin weight to body round weight of sharks by species ranged from 3.7% to 7.7%, while the mean was 5.4%. The total ratio of wet fin weight to the dry fin weight of sharks ranged 0.38 to 0.70 and the mean value was 0.53. The ratio of dry fin weight to the body round weight of the sharks was estimated to be 2.86%.

• Journal of Forest and Environmental Science
• /
• v.25 no.2
• /
• pp.93-100
• /
• 2009

In Malaysia, Labisia pumila Benth & Hook f, popularly known as 'Kacip Fatimah' has been used traditionally to treat various elements of the woman's health in Malay community. The objective of this study was to develop randomly amplified polymorphic DNA (RAPD) based DNA markers for the identification of L. pumila and to distinguish its three varieties from each other. Total DNA from nine accessions of L. pumila was extracted by CTAB method and polymerase chain reactions (PCR) were carried out to amplify the segments of DNA using different primers to develop DNA barcode using RAPD technique. To find out variety-specific DNA marker/s, twenty different 10-mer primer sequences with annealing temperature from 36-$40^{\circ}C$ were evaluated in triplicate. Out of 20 random primers, two primers (OPA-1 and OPA-2/A10) were selected which produced reliable RAPD band patterns. To have DNA based handle, two RAPD amplification products were cloned and sequenced to determine the identity of the DNA. RAPD analysis using two random primers generated 72 discrete bands ranging in size 200 bp-3,000 bp. Fifty nine of these were polymorphic loci (82%) and thirteen were non-polymorphic loci (18%). A total of 32 bands polymorphic loci (72%) were amplified with primer OPA-1 and analyzed by cluster analysis and UPGMA (Unweighted Pair Group Method with Arithmetic) to present a dendogram depicting the degree of genetic relationship among nine accessions of L. pumila. Our results shows the reasonable genetic diversity among the L. pumila varieties and within varieties; and two RAPD marker sequences obtained could be used to identify L. pumila at species level.

• Plant Biotechnology Reports
• /
• v.4 no.2
• /
• pp.157-163
• /
• 2010

A protocol for in vitro propagation from pseudobulb sections of Lycaste armomatica (Graham ex Hook) Lindl., an ornamental and fragrant orchid, was developed. The effect of four cytokinins: kinetin (K), metatopolin (mT), $N^6$-benzyladenine (BA), and thidiazuron (TDZ), in equimolar concentrations, was investigated. Shoot formation from apical and basal pseudobulb sections was obtained in all treatments. A few medial sections cultured in media supplemented with BA formed protocorm-like bodies. Shoot formation was greater from the basal section than the apical, and mainly occurred in explants cultured in media containing TDZ. The highest average numbers of shoots per explant were achieved from basal sections cultured in media supplemented with TDZ at 4.4, 8.87 and 2.2 ${\mu}M$, forming on average 9.9, 8.6 and 7.3 shoots per explant, respectively. Since the medial pseudobulb section was the worst explant for propagation of L. aromatica, we recommend that pseudobulbs be divided into two sections; the basal half should be cultured in MS medium supplemented with TDZ at 4.4 ${\mu}M$ and the apical half with TDZ at 2.2 ${\mu}M$. Subculturing individual shoots in MS medium without plant growth regulators allows further development and rooting. A survival rate of more than 90% under greenhouse conditions was achieved. This research represents a direct contribution to the conservation and sustainable use of this valuable natural resource.