• 자동차안전학회지
• /
• 제12권2호
• /
• pp.33-39
• /
• 2020

This paper presents an Around View Monitoring (AVM) stop-line detection based longitudinal position correction algorithm for automated driving on urban roads. Poor positioning accuracy of low-cost GPS has many problems for precise path tracking. Therefore, this study aims to improve the longitudinal positioning accuracy of low-cost GPS. The algorithm has three main processes. The first process is a stop-line detection. In this process, the stop-line is detected using Hough Transform from the AVM camera. The second process is a map matching. In the map matching process, to find the corrected vehicle position, the detected line is matched to the stop-line of the HD map using the Iterative Closest Point (ICP) method. Third, longitudinal position of low-cost GPS is updated using a corrected vehicle position with Kalman Filter. The proposed algorithm is implemented in the Robot Operating System (ROS) environment and verified on the actual urban road driving data. Compared to low-cost GPS only, Test results show the longitudinal localization performance was improved.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2213-2223
• /
• 2005

In order to reconstruct a full 3D human model in reverse engineering (RE), a 3D scanner needs to be placed arbitrarily around the target model to capture all part of the scanned surface. Then, acquired multiple scans must be registered and merged since each scanned data set taken from different position is just given in its own local co-ordinate system. The goal of the registration is to create a single model by aligning all individual scans. It usually consists of two sub-steps: rough and fine registration. The fine registration process can only be performed after an initial position is approximated through the rough registration. Hence an automated rough registration process is crucial to realize a completely automatic RE system. In this paper an automated rough registration method for aligning multiple scans of complex human face is presented. The proposed method automatically aligns the meshes of different scans with the information of features that are extracted from the estimated principal curvatures of triangular meshes of the human face. Then the roughly aligned scanned data sets are further precisely enhanced with a fine registration step with the recently popular Iterative Closest Point (ICP) algorithm. Some typical examples are presented and discussed to validate the proposed system.

• 한국멀티미디어학회논문지
• /
• 제22권10호
• /
• pp.1142-1148
• /
• 2019

Reconstruction of the three-dimensional (3D) environment is a key aspect of augmented reality and augmented virtuality, which utilize and incorporate a user's surroundings. Such reconstruction can be easily realized by employing a Kinect device. However, multiple Kinect devices are required for enhancing the reconstruction density and for spatial expansion. While employing multiple Kinect devices, they must be calibrated with respect to each other in advance, and a marker is often used for this purpose. However, a marker needs to be placed at each calibration, and the result of marker detection significantly affects the calibration accuracy. Therefore, a user-friendly, efficient, accurate, and marker-less method for calibrating multiple Kinect devices is proposed in this study. The proposed method includes a joint tracking algorithm for approximate calibration, and the obtained result is further refined by applying the iterative closest point algorithm. Experimental results indicate that the proposed method is a convenient alternative to conventional marker-based methods for calibrating multiple Kinect devices. Hence, the proposed method can be incorporated in various applications of augmented reality and augmented virtuality that require 3D environment reconstruction by employing multiple Kinect devices.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.597-602
• /
• 2016

In image guided surgery, a patient registration process is a critical process for the successful operation, which is required to use pre-operative images such as CT and MRI during operation. Though several patient registration methods have been studied, we concentrate on one method that utilizes 3D surface measurement data in this paper. First, a hand-held 3D surface measurement device measures the surface of the patient, and secondly this data is matched with CT or MRI data using optimization algorithms. However, generally used ICP algorithm is very slow without a proper initial location and also suffers from local minimum problem. Usually, this problem is solved by manually providing the proper initial location before performing ICP. But, it has a disadvantage that an experience user has to perform the method and also takes a long time. In this paper, we propose a method that can accurately find the proper initial location automatically. The proposed method finds the proper initial location for ICP by converting 3D data to 2D curvature images and performing image matching. Curvature features are robust to the rotation, translation, and even some deformation. Also, the proposed method is faster than traditional methods because it performs 2D image matching instead of 3D point cloud matching.

• 해양환경안전학회지
• /
• 제19권5호
• /
• pp.552-560
• /
• 2013

본 연구에서는 기존의 블록 조립 후 정도 계산 절차와 블록 조립의 특성을 고려한 최적 정도 계산 알고리즘 개발을 위한 연구를 수행하였다. 여기서 제안된 알고리즘은 생산관리점들 중 특정한 관리점을 기준으로 생산관리점들의 설계와 측정 데이터 사이의 평균제곱근 오차의 합을 목적함수로 가진다. 생산관리점들은 접합면 상의 데이터와 그 외의 데이터로 구분하였으며, 구분된 데이터는 정합 과정에서 사용되어지는 6가지 자유도 조합 결정에 있어 다양한 제약조건 구성과 목적함수 계산에 사용하였다. 목적함수 및 제약조건과 함께 탑재공정을 고려하여 설계와 측정 계산 대상점들 간의 오차가 허용 오차 이내에 포함되는지를 확인하는 과정이 포함되는 점과 점 관계를 이용하는 변형 ICP 알고리즘과 sampling법을 혼합하여 최소 오차 범위를 계산하는 최적 정도 계산 알고리즘을 개발하였다. 실제 공정에서 확인된 블록 측정 데이터를 개발된 알고리즘에 적용한 결과에 따르면 최적 정도 계산의 대상점은 접합면 상의 점들만으로 계산을 수행하는 것보다 전체 점을 대상으로 계산하는 것이 더 작은 오차를 가지며 접합면의 한 점을 고정된 일치점으로 두고 모든 생산관리점들을 대상점으로 계산 하는 것이 최소 오차를 가지는 최적 정도 계산방법이라는 결론을 도출하였다.

• Spatial Information Research
• /
• 제19권2호
• /
• pp.37-46
• /
• 2011

최근 GIS 분야에서 공간 정보를 효과적으로 사용하기 위하여 다양한 원천 자료를 통합하는 것이 중요한 화두로 대두되고 있다. 일반적으로 공간 정보의 통합은 대응 공간 객체를 탐색하고 각 객체와 연동되어 있는 정보를 결합함으로써 수행된다. 하지만 어떤 공간 객체에 대응되는 다른 공간 객체를 탐색하는 것은 매우 어려운 문제로, 서로 다른 공간 객체를 탐색하기 위한 매칭 방법이 많이 연구되고 있다. 따라서 본 연구는 서로 다른 건물 데이터 셋의 통합 과정에서 좌표 변환 이후에도 잔존하는 국지적 위치 오차를 고려하여 대응 공간 객체를 탐색할 수 있는 방법을 개발하는 것을 목적으로 한다. 이러한 목적을 위해 두 지도를 좌표 변환하고 중첩 및 위치 오차가 유사한 단위 구역을 생성한 후, 위치 오차가 유사한 단위 구역 내의 건물들을 매칭하기 위하여 유사도와 ICP(iterative closest point) 알고리즘을 이용하였다. 그리고 이러한 제안된 방법의 활용 가능성을 실험을 통하여 알아보았다.