• 한국지구과학회지
• /
• 제36권5호
• /
• pp.476-483
• /
• 2015

The high-order Laplacian-type filter, which is capable of providing isotropic and sharp cut-off filtering on the spherical domain, is essential in processing geophysical data. In this study, a spherical high-order filter was designed by combining the Fourier method with finite difference-method in the longitude and latitude, respectively. The regular grid system was employed in the filter, which has uniform angular spacing including the poles. The singularity at poles was eliminated by incorporating variable transforms and continuity-matching boundary conditions across poles. The high-order filter was assessed using the Rossby-Haurwitz wave, the observed geopotential, and observed wind field. The performance of the filter was found comparable to the filter based on the Galerkin procedure. The filter, employing the finite difference method, can be designed to give any target order of accuracy, which is an important advantage being unavailable in other methods. The computational complexity is represented with 2n-1 diagonal matrices solver with n being the target order of accuracy. Along with the availability of arbitrary target-order, it is also advantageous that the filter can adopt the reduced grid to increase computational efficiency.

• Composites Research
• /
• 제13권6호
• /
• pp.30-38
• /
• 2000

본 연구에서는 낙추충격 시험시스템을 제작하여 낙추의 응력파 전파 현상을 고려한 CFRP적층판의 충격흡수특성 및 충격강도를 평가하였으며, 초음파 C-스캔너를 이용하여 내부손상영역을 관찰하여 시험편의 손상면적과 흡수에너지의 상관관계를 규명하였다. 적층배향이 다른 직교이방성 시험편이 의사등방성 시험편의 충격에너지와 흡수에너지 수준을 보면 의사등방성 시험편이 흡수에너지가 높게 나타났지만, 충격에너지와 박리면적의 크기는 별 차이가 나타나지 않았으며 계면수가 많은 시험편이 충격에너지를 많이 흡수하였다. 적층수 및 적층방향이 동일한 경우, GFRP 프리프레그를 삽입한 시험편이 그렇지 않은 시험편보다 흡수에너지가 높게 나타났다.

• 대한기계학회논문집A
• /
• 제36권4호
• /
• pp.451-455
• /
• 2012

수학적 방법에 기초한 점근해석기법은 이방성 보 구조물의 설계 및 해석에 있어 강력한 도구이다. 이러한 장점에도 불구하고, 점근해석 기법은 전단 변형에 상대적으로 취약한 복합재료 보의 고차해를 구함에 있어 점근적으로 정확한 경계조건을 필요로 한다. 생브낭의 원리를 적용하여 응력상태를 개선하는 방법은 등방성 보 및 판 구조물에 대하여 개발되었고, 외팔보 등의 예제를 통해 검증되었다. 이 방법은 점근적으로 정확한 경계조건을 요구하지 않으며, 반복계산도 필요로 하지 않는다는 장점이 있다. 본 논문에서는 이 방법을 일반 이방성 보 구조물에 대하여 확장 적용하여 생브낭의 원리를 적용하는 방법을 일반화 하고자 한다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 1부
• /
• pp.416-420
• /
• 2011

무선센서네트워크 시스템의 확산에 가장 큰 장애물인 한정된 전원으로 동작하는 특성에 따라 주기적인 배터리 교체에 소요되는 비용이다. 이러한 문제를 해결하기 위하여 원격지에서 에너지를 무선으로 공급하는 자기유지 지원 기술이 연구되고 있다. 본 논문에서는 무선에너지전송을 통해 무선센서네트워크 노드에 에너지를 전송하는 환경을 구축하고 환경에 따라 에너지 수신의 결과를 측정하는 테스트베드를 구축하였다. 구축된 테스트베드는 Powercast사의 915MHz 대역에서 3W EIRP (Equivalent Isotropic Radiated Power) 에너지 송신장치, RF (Radio Frequency) 에너지 획득 모듈 그리고 TI사의 CC2530기반의 무선센서네트워크 노드로 구성되어있다. 또한 수신된 에너지의 양을 측정하고 기록하는 LabView기반의 모니터링 시스템이 구현되었다. 구현된 테스트베드는 다양한 환경에서 RF를 기반의 무선에너지전송을 통한 자기유지(Self-sustainable) 시스템의 전원공급 상태를 모니터링에 활용될 수 있다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.324-333
• /
• 2013

The purpose of this paper is to improve the efficiency of multi-objective topology optimization using a genetic algorithm (GA) with bar-system representation. We proposed a new GA using an elite initial population obtained from a Solid Isotropic Material with Penalization (SIMP) using a weighted sum method. SIMP with a weighted sum method is one of the most established methods using sensitivity analysis. Although the implementation of the SIMP method is straightforward and computationally effective, it may be difficult to find a complete Pareto-optimal set in a multi-objective optimization problem. In this study, to build a more convergent and diverse global Pareto-optimal set and reduce the GA computational cost, some individuals, with similar topology to the local optimum solution obtained from the SIMP using the weighted sum method, were introduced for the initial population of the GA. The proposed method was applied to a structural topology optimization example and the results of the proposed method were compared with those of the traditional method using standard random initialization for the initial population of the GA.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.104-109
• /
• 2003

A microcellular, which combines a rubber with the conventional formulation of styrene/divinylbenzene/sorbitan monooleate/water system, was prepared using high internal phase emulsion (HIPE) polymerization. Although the open microcellular foam with low density from the conventional HIPE polymerization shows highly porous characteristics with fine, regular and isotropic structure, the one having much smaller cell size is desirable for various applications. In this study, a polybutadiene was introduced to reduce the cell size with comparable properties. Major interests were focused on the effects of rubber concentration and agitation speed on the cell sizes and compression properties. Scanning electron microscopy was used to observe the microcellular morphology and compression tests were conducted to evaluate the stress-strain behaviors. It was found that the cell size decreased as rubber concentration increased, reflecting a competition between the higher viscosity of continuous phase and the lower viscosity ratio of dispersed to continuous phases due to the addition of high molecular weight rubber into the oil phase of emulsion. A correlation for the average cell size depending on agitation speed was attempted and the result was quite satisfactory.

• Structural Engineering and Mechanics
• /
• 제28권3호
• /
• pp.281-294
• /
• 2008

In this paper, linear elastic isotropic structures under the effects of both stochastic operators and stochastic excitations are studied. The analysis utilizes the spectral stochastic finite elements (SSFEM) with its two main expansions namely; Neumann and Homogeneous Chaos expansions. The random excitation and the random operator fields are assumed to be second order stochastic processes. The formulations are obtained for the system solution of the two dimensional problems of plane strain and plate bending structures under stochastic loading and relevant rigidity using the previously mentioned expansions. Two finite element programs were developed to incorporate such formulations. Two illustrative examples are introduced: the first is a reinforced concrete culvert with stochastic rigidity subjected to a stochastic load where the culvert is modeled as plane strain problem. The second example is a simply supported square reinforced concrete slab subjected to out of plane loading in which the slab flexural rigidity and the applied load are considered stochastic. In each of the two examples, the first two statistical moments of displacement are evaluated using both expansions. The probability density function of the structure response of each problem is obtained using Homogeneous Chaos expansion.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.48-56
• /
• 2001

In this paper, this study aims at the evaluation on the characteristics of CFRP laminate plates using a falling weight impact tester. The experiment was conducted on several laminates of different orientation. A system was built far measur- ing the impact strength of CFRP laminates in consideration of stress wave propagation theory using a falling weight impact tester. Delamination areas of impacted specimens for the different ply orientation were measured with ultrasonic C- scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having flour interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy oft hybrid specimen containing a GFRP layer was higher than that of normal specimens.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1429-1437
• /
• 1992

본 연구에서는 이완형 물성방정식을 바탕으로 하며 프와송 비가 일정하다는 가정을 하지 않는다. 또한 점탄성 지배방정식에 변분원리를 적용하고 유도되어진 식 에 유한요소해법을 사용하여 시스템 기본해석을 위한 연립방정식을 유도한다. 이와 함께 점탄성 물성함수의 유도 및 응력계산을 위한 공식화 과정도 설명한다. 제시된 방법론의 타당성 및 정확성을 보이기 위해서 평면응력 및 평면변형 문제의 변위 및 응력을 수치해석하여 이론해와 비교 검토하며, 아울러 시간증분의 변화와 Gauss poi- nts수가 수치정확도에 끼치는 영향을 조사한다.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.563-575
• /
• 2007

This contribution contained the classical work of an open-hole tensile plate to demonstrate the performance of grating shearography and to compare with the results obtained by other full-field measurement techniques, The isotropic plate with an open-hole has often appeared in the previous contributions introducing novel full-field method and system. Grating shearography directly provided six quantitative measurands about the specimen's surface kinematics by using a single measurement set: three in-plane strains, in plane rotation, and two out-of-plane slopes. The quasi-plane wavefront of grating metrology led to high signal-to-noise ratio (SNR) and thus neither fitting nor filtering was applied, and the small shearing distance of $101{\mu}m$ could be used. The small shearing distance provided the outstanding spatial resolution of $80{\mu}m$ and sensitivity appropriate for experimental mechanics. Finally, the grating shearography enabled the visualization of the complex surface deformation around the hole and also detected parasitic flexions of the specimen in the micrometer regime during the tensile test.