• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2033-2037
• /
• 2014

A reaction mixture was developed for formation of soft organic monolith that was easily smashed, rinsed, refluxed, filtered, and dried to give monolith particles having high pore volume of macropores. This phase was almost without mesopores. The reaction mixture was composed of methacrylic acid, ethylene glycol dimethacrylate, polyethylene glycol (porogen), and an initiator in a mixed solvent of toluene and isooctane. The selection of porogen and its amount was carefully carried out to obtain the optimized separation efficiency of the resultant phase. The median macropore size was 1.6 ${\mu}m$, and the total pore volume was 3.0-3.4 mL/g. The median particle size (volume based) was 15 ${\mu}m$, and the range of particle size distribution was very broad. Nevertheless the column (1 ${\times}$ 300 mm) packed with this phase showed good separation efficiency (N~10,000-16,000) comparable to that of a commercial column packed with 5 ${\mu}m$ C18 silica particles.

• Journal of Microbiology
• /
• v.34 no.4
• /
• pp.363-369
• /
• 1996

As basic study to evaluate the treatability of oil-contaminated environment with bacteria, isolation and characterization of crude oil-degrading bacterium were carried out. A bacterial strain SH-14 capable of degrading crude oil was isolated from contaminated soils by enrichment culture technique and identified as Acinetobacter sp. by morphological, cultural and biochemical characteristics, and so named Acinetobacter sp. SH-14. The optimal medium composition and cultural conditions for the growth and emulsification of crude oil by Acinetobacter sp. SH-14 used were crude oil of 2.0%, $KNO_3$ of 0.2%, $K_2HPO_4$ of 0.05%, and $MgSO_4\;{\cdot}\;7H_2O$ of 1.0%, along with initial pH 7.0 at $30^{\circ}C$. Acinetobacter sp. SH-14 showed to be resistant to chloramphenicol and utilized various hydrocarbons such as dodecane, hexadecane, isooctane, cyclo-hexane etc., as a sole carbon source. Acinetobacter sp. SH-14 harbored a single plasmid. By agarose gel electrophoresis and curing experiment it was found that the genes for crude oil components degradation were encoded on the plasmid.

• KSBB Journal
• /
• v.8 no.1
• /
• pp.83-88
• /
• 1993

Lipase was separated using reverse mlcelles in a spray column. The 50 mM AOT-Isooctane solution was used as reverse micellar solution for the extraction of lipase (crude containing 25% Protein). Ionic strength was controlled by KCl(0.1M KCl for extraction, 0.5M KCl for back exlractlon). Acetate buffer and phosphate buffer were used for control of pH. The efficiencies of extraction and stripping were 30% and 50%. An increase of circulation did not change the efficiency of extraction in forward extraction. The optimum flow rate was around 0.10ml/sec.

• Preventive Nutrition and Food Science
• /
• v.5 no.2
• /
• pp.70-74
• /
• 2000

Most fatty acids in food matrices are triglyceride(TG) forms. Conjugated linoleic acid(CLA) produced from linoleic acid by microorganisms or chemicals is a free form. To apply the CLA to food systems, the TG containing CLA(designate CLA-TG) was synthesized by Lipozyme-catalyzed esterification method. An optimum reaction con-dition for the esterification of free CLA(FCLA) to glycerol by Lipozyme was determined as follows; Lipozyme(50mg) effectively catalyzed the esterification of CLA(500mg) to glycerol(1150mg) dissolved in isooctane (3ml) in a shaking incubator (200 rpm, 5$0^{\circ}C$) for 48 hr. Under the reaction condition, the resultant contained 52.4% CLA-TG as well as 31.1% Di-CLA-glycerol(CLA-DG), 7.6% mono-CLA-glycerol(CLA-MG), and 9.0% other CLA(un-reacted FCLA plus CLA dimer). These results suggest that the Lipozyme could be a useful enzyme for the production of CLA-TG to be employed in foods.

• Korean Journal of Plant Resources
• /
• v.21 no.6
• /
• pp.435-439
• /
• 2008

Due to the fact that tocopherols and tocotrienols have antioxidant and anticancer properties, the commercial utilization of unsaponifiable fractions in rice bran is increasing. These nutraceutical compounds, however, are fairly unstable and readily break down when exposed to oxygen or lighting conditions. To compare the relative sensitivity of vit E isomers to heat and oxygen, concentrated unsaponifiable fractions extracted from crude rice bran oil were exposed to various temperature, oxygen (nitrogen-balanced), and bathing solvent conditions and resultant concentration changes in ${\alpha}$- and ${\gamma}$-tocopherols (T) and tocotrienols (T3) were evaluated. Each isomer exhibited different heat stability. Among them, ${\alpha}$-T3 degraded more rapidly compared to other vit E isomers while ${\alpha}$-T was the most stable isomer. Oxygen level also showed significant impact on each isomer's stability where severe reductions of ${\gamma}$-T (by 20%) and ${\gamma}$-T3 (by 29%) were observed under 2% oxygen conditions, while under 0% oxygen conditions no degradation could be observed even after exposure to $95^{\circ}C$ for 4 hours. When various blending solvents were mixed with concentrated unsaponifiable fractions, organic solvents such as isooctane and hexane were more effective in maintaining the stability of ${\gamma}$- T3 compared to edible oils, among which com oil was more efficient than soybean and rice bran oils.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.204-210
• /
• 2016

This paper presents an experimental analysis of the growth and oxidation processes of soot particles generated in an isooctane diffusive laminar flame due to incomplete combustion. The effects of iron-based diagnostics were employed to measure the elastic scattering light from soot particles in a flame at different flame heights, and the differential scattering coefficients were calculated through a calibration process. The growth and oxidation of soot particles in flame was investigated by comparing differential scattering coefficients, and the soot volume fraction was seen to decrease in the soot oxidation process. In the same manner, the differential scattering coefficients were calculated for iron-based fuel-additive seeded flame, and these coefficients were revealed to be smaller than those obtained in the fuel-additive unseeded flame. In addition, transmission through the radial direction of the flame was measured, and transmission in the soot oxidation regime was approximately 5% higher for the seeded flame. The propensity of the data coincided well with the differential scattering coefficients, and it can be concluded that the iron component of the fuel additive plays a crucial role as a catalyst, which eventually enhanced soot particle oxidation.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.661-664
• /
• 1999

Proteins were extracted from an aqueous phase with reversed micelles. The effect of pH, and salt concentration on the solubilization of lysozyme in AOT/isooctane solution was studied to explore the potential for employing this solvent system in the large-scale recovery and concentration of proteins using liquid extraction. For pH values below the isoelectric point, pl of the protein, solubilization was high, probably owing to strong electrostatic interactions between the positively charged proteins and the anionic surfactant heads forming the inner micelle wall. At low ionic strength complete solubilization of the protein was observed. A pH higher than the pl of lysozyme and a salt concentration lower than that of the water pool were required for the recovery aqueous phase to ensure the back extraction of lysozyme from the AOT reversed micelles.

• KSBB Journal
• /
• v.5 no.3
• /
• pp.215-221
• /
• 1990

The solubilization of BSA, pepsin, trypsin and ribonuclease-a in cationic reverse micellar solutions has been investigated. For complete solubilization into reverse micellar solutions, pH values of several pH units above the isoelectric point of each protein were required. Solubilization was observed to decrease with increasing ionic strength of KCI. The size of empty micelles showed no significant change with increasing ionic strength. Trioctylmethyl ammonium chloride (TOMAC) in cyolohexane showed the lowest solubilization for the proteins. The system didodecyl dimethyl ammonium bromide (DDAB)-tetrachloroethylene was capable of solubilizing larger amounts of proteins than the system DDAB-benzene. Cetyl trimethyl ammonium bromide(CTAB)-hexanol-isooctane system showed lower solubilization than DDAB-tetrachloroethylene system, while it had higher Wo value.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.277-288
• /
• 2017

Rhizomucor miehei NRRL 5282 and Rhizopus oryzae NRRL 1526 can produce lipases with high synthetic activities in wheat bran-based solid-state culture. In this study, the purification and biochemical characterization of the lipolytic activities of these lipases are presented. SDS-PAGE indicated a molecular mass of about 55 and 35 kDa for the purified R. miehei and Rh. oryzae enzymes, respectively. p-Nitrophenyl palmitate (pNPP) hydrolysis was maximal at $40^{\circ}C$ and pH 7.0 for the R. miehei lipase, and at $30^{\circ}C$ and pH 5.2 for the Rh. oryzae enzyme. The enzymes showed almost equal affinity to pNPP, but the $V_{max}$ of the Rh. oryzae lipase was about 1.13 times higher than that determined for R. miehei using the same substrate. For both enzymes, a dramatic loss of activity was observed in the presence of 5 mM $Hg^{2+}$, $Zn^{2+}$, or $Mn^{2+}$, 10 mM N-bromosuccinimide or sodium dodecyl sulfate, and 5-10% (v/v) of hexanol or butanol. At the same time, they proved to be extraordinarily stable in the presence of n-hexane, cyclohexane, n-heptane, and isooctane. Moreover, isopentanol up to 10% (v/v) and propionic acid in 1 mM concentrations increased the pNPP hydrolyzing activity of R. miehei lipase. Both enzymes had 1,3-regioselectivity, and efficiently hydrolyzed p-nitrophenyl (pNP) esters with C8-C16 acids, exhibiting maximum activity towards pNP-caprylate (R. miehei) and pNP-dodecanoate (Rh. oryzae). The purified lipases are promising candidates for various biotechnological applications.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.88-96
• /
• 2006

The self-sealing rubber material for a fuel cell which has self-sealing ability, in case of fuel leakage, was studied. Cure characteristics, density, swelling, and surface morphology of foamed natural rubber were investigated with carbon black and with processing oil within the range of $10{\sim}30phr$. The rheological properties indicated that the value of $ts_2$ and the value of $Tc_{90}$ were increased with increasing a content of processing oil, while carbon black did not show a similar trend. A difference in density by foaming was decreased to one fifth scale compared to the initial value. According to the swelling test of foamed natural rubber in fuel C, isooctane and toluene, all the self-sealing action was finished in two minutes. From the SEM image for the surface of rubber compounding, a foaming by sodium bicarbonate was found to be unequal and consecutive foaming cell.