• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.42_43
• /
• 2009

Ferroresonance is a resonance condition between a nonlinear iron core of a potential transformer (PT) and a capacitance. It can lead to PT voltages several times the normal equipment ratings, and cause the isolation broken and damage to equipments near the PT. This paper proposes a analysis method of PT ferroresonance in the time domain. Based on the simplified equivalent circuit, a differential equation was found and the flux was calculated when ferroresonance generates. The forced response and natural response were also analyzed. The performance of proposed analysis method was verified with the EMTP-RV generated data. The method can help analysis chaotic ferroresonance and periodic ferroresonance.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2004년도 하계학술대회
• /
• pp.295-297
• /
• 2004

A double-role double through switch with defected ground structure (DGS) is Proposed. The equivalent circuit for the proposed switch structure is derived based on equivalent circuit of newly proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method The on/off operation of the proposed switch Is obtained by varying the capacitance in the ground metallic plane The experimental results show excellent insertion loss characteristic at on state and isolation characteristic at off state.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.124-130
• /
• 1989

ITIC를 중심으로 고밀도 DRAM을 위한 획기적인 밀도 향상을 기할 수 있는 공정과정과 회로디자인의 기술 혁신에 대하여 지다이너 입장에서 논의하였다. 여기서 개발한 TETC라 부르는 DRAM은 trench 기술과 SEG기술을 이용하였는데 $n^+-polysilycon$인 storage 전극과 $n^+-source$ 전극이 self-con-tact되고 soft error 를 극복할 만큼 충분히 큰 정전용량을 갖으므로 절연 영역을 따라서 만든 수직의 캐패시터를 이용함으로써 셀 크기를 기존의 BSE cell구조에 비하여 약 30% 감소되었다.

• Journal of Plant Biology
• /
• 제34권1호
• /
• pp.19-23
• /
• 1991

벼의 종자로부터 embryogenic callus를 유도하고 이로부터 개체로의 재분화를 유도하였으며, embroyogenic cell suspension culture를 통하여, 이로부터 원형질체를 분리, 배양하여 embryogenic callus를 형성하였다. 또한, 분리된 원형질체를 electroporation하였을 때 생존율(viability)에 미치는 여러 요인들을 조사하였다. 원형질체의 생존율은 voltage와 capactiance가 증가할수록 감소를 보였으며, HBM buffer에서 $4^{\circ}C$로 electroporation 하였을 때 생존율에 보다 효과적이었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1154-1161
• /
• 2015

This paper presents a semi-lumped balun transformer using conventional PCB process and its design theory and geometry for the maximally flat response and wide bandwidth using magnetically coupled LC resonators. The proposed balun is comprised of two pairs of coupled resonators which share one among three LC resonators. It provides an identical magnitude and phase difference of 180° between two balanced ports with DC isolation and an impedance transformation characteristic. Theoretical design and analysis were performed to optimize the inductance and capacitance values of proposed balun device for obtaining the wide bandwidth and maximally flat response in its pass-band. Three balun transformers with a center frequency of 500 MHz were demonstrated for proving the concept of design proposed. They were fabricated by using lumped chip capacitors and planar inductors embedded into a conventional 4-layered PCB substrate. They exhibited a maximum magnitude difference of 0.8 dB and phase difference within 2.4 degrees.

• Journal of electromagnetic engineering and science
• /
• 제12권3호
• /
• pp.216-222
• /
• 2012

This paper presents a single-pole eight-throw switch, based on an eight-way power divider, using substrate integrate waveguide(SIW) technology. Eight sectorial-lines are formed by inserting radial slot-lines on the top plate of SIW power divider. Each sectorial-line can be controlled independently with high level of isolation. The switching is accomplished by altering the capacitance of the varactor on the line, which causes different input impedances to be seen at a central probe to each sectorial line. The proposed structure works as a switching circuit and an eight-way power divider depending on the bias condition. The change in resonant frequency and input impedance are estimated by adapting a tapered transmission line model. The detailed design, fabrication, and measurement are discussed.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권3호
• /
• pp.132-138
• /
• 2005

In this paper a DPDT(Double-Pole Double Through) switch with defected ground structure(DGS) is proposed. The equivalent circuit for the proposed switch structure is derived according to based on equivalent circuit of proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method. The on/off operation of the proposed switch is obtained by varying the capacitance of the varactor diode at the defected ground plane. In the case of ON state, the insertion loss of the fabricated DPDT was shown under 1dB. And in OFF state, we found the rejection characteristic over 20dB at the designed frequency 2.45GHz. The experimental results show excellent insertion loss at on state and isolation at off state.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2213-2215
• /
• 2000

In this paper we implemented a novel re-entrant mode microstrip directional coupler for realizing the high directivity characteristic using finite element (FE) analysis. In microstrip configuration, the high directivity can be reached by matching the even- and odd-mode effective phase velocities. Through the values of capacitance obtained from 2-dimensional finite element(FE) analysis, the phase velocities for each mode and the design parameter were extracted for the proposed coupled-line configuration. Based on the extracted design parameter with phase matching condition we designed and fabricated 30dB directional coupler at 850MHz. Experimental results show good performance with excellent isolation.

• 한국미생물학회:학술대회논문집
• /
• 한국미생물학회 2000년도 추계학술발표대회
• /
• pp.85-91
• /
• 2000

Aspergillus oryzae is a filamentous fungus classified in the group Aspergillaceae Ascomycetes. It is an important microorganism for industrial production of enzymes and fermented food productions. It secrets large quantities of proteins or enzymes into the culture medium which makes this organism appealing for the production of heterologous proteins. Recently Electric field-mediated transformation method, electroporation, has been applied to fungal transformation. In this study, fungal transformation was carried out by bypassing the protoplast isolation step, decreasing the culturing time and non-protoplast transformation for the increment of transformation efficiency. Transformants were obtained with electroporation in optimal condition 2,500 voltage, 1,540 ohm and 0.50 capacitance. More than 1,000 transform ants were obtained with 6-10 hrs cultured mycelia without enzyme treatment, called non-protoplast transformation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.227-228
• /
• 2015

본 논문에서는 Optocoupler 절연형 오프라인 플라이백 변환기 궤환 단의 직류 바이어스 해석 기법을 제안한다. 직류 바이어스 해석을 통해 목표한 Current Transfer Ratio(CTR)를 얻고 Junction Capacitance($C_j$)를 측정하여 제어기 설계에 적용시켜 안정도 및 성능을 측정하였다. NCP1230, PC817, TL431 IC를 이용하여 플라이백 변환기의 제어회로를 제작하였고, 시뮬레이션을 이용해 직류 바이어스 해석 기법의 타당성을 검증하였다.