• 제목/요약/키워드: Irrigation scheduling

검색결과 46건 처리시간 0.022초

밭작물의 뿌리성장과 생육시기별 토양수분 소비형태에 관한 연구 - 콩, 고추, 참깨 - (A Study on Root Growth and Soil Moisture Extraction Patten during Growing Period of Upland Crops -Soybean, Redpepper, Sesame-)

  • 정하우;박상현;김성준;정영신
    • 한국농공학회지
    • /
    • 제35권1호
    • /
    • pp.67-75
    • /
    • 1993
  • This study is to analyze both root growth and soil moisture extraction pattern during the growing period of upland crops with respect to soybean, redpepper, sesame. Field and lysimeter tests were conducted under 12 treatments of soil moisture level by the San Cristobal experimental design(1981) and 3 soil type(sand, sandy loam, silty loam) for 4 years('87-'90) at the experimental plot of Rural Development Administration located in Suwon. The results of this study are summarized as follows : 1.For soybean, redpepper and sesame, root growth in dry soil was better than that in wet soil and it could be expressed as a sin function in terms of time. Maximum root depth was about 55cm, 44cm, 40cm respectively. 2.The average soil moisture extraction pattern for soybean, redpepper and sesame were 61.4%, 62.8%, 79.5% for zone l(0-l5cm). 25.5%, 27.1%, 18.3%, for zone 2(15-30cm).11.4%, 9.8%, 2.3% for zone 3(30-45cm), 1.7%, 0.3%, 0.04% for zone 4(45-60cm) respectively. This means that Zone 1 would be the dominant zone in irrigation scheduling. 3.With respect to soybean, the soil moisture extraction pattern(SMEP) was varied somewhat according to the erent maintenance of soil moisture level. The average SMEP for high maintenance of soil moisture was 46%, 29%, 17%, 8%, for middle maintenance of soil moisture was 43%, 29%, 17%, 11 % and for low maintenance of soil moisture was 40%, 28%, 20%, 12%, respectively. 4.With respect to soybean, the soil moisture in the upper layer was distinctly consumed more than that in the lower layer for clay loam soil and the soil moisture of all layers was consumed evenly for sand soil. The SMEP for sandy loam soil showed a middle result compared with the above 2 soil types.

  • PDF

미국 캘리포니아주(州)의 벼농사에 관한 농업지리학적 연구 (Agricultural Geography of Rice Culture in California)

  • 이전;허무열
    • 한국지역지리학회지
    • /
    • 제2권1호
    • /
    • pp.51-67
    • /
    • 1996
  • 이 연구는 캘리포니아주(州) 벼농사를 종합적으로 고찰하는 연구이다. 미국에서 생산되는 벼의 약 23%는 캘리포니아 중앙분지에서 생산된다. 캘리포니아 중앙분지는 새크라멘토분지, 산호아퀸분지, 델타지역의 세 지역으로 구분되는데, 새크라멘토분지는 벼 재배에는 매우 이상적인 자연조건을 갖추고 있다. 오늘날 새크라멘토분지에서 캘리포니아주(州) 벼의 약 95%가 생산된다. 캘리포니아주(州)에서 벼가 상업적으로 재배되기 시작한 것은 1912년이었다. 캘리포니아주(州)에서 벼농사는 처음부터 관개농업에 의존하였다. 논에 물을 댄 상태에서 벼가 자라야지 잡초가 무성해지지 않고, 벼 수확량도 많아진다. 캘리포니아주(州) 벼농사에 사용되는 관개용수의 90% 이상은 지표수에서 끌어들인 것이고, 나머지는 지하수를 퍼 올린 것이다. 캘리포니아주(州) 벼농사는 고도로 기계화되어 있다. 트랙터, 레이저 평탄기, 콤바인, 건조기, 비행기 등이 벼농사에 이용되고 있다. 이와 같은 기계화 덕택으로 캘리포니아주(州) 벼농사에서 1 에이커당 노동투하량은 4시간 정도에 지나지 않는다. 캘리포니아주(州)에서는 일찍부터 벼농사에 관한 연구가 본격적으로 시작되었다. 벼농사 연구에서 가장 중요한 것은 품종개량이었다. 특히 캘리포니아주(州)에서는 지난 수십년 동안 품종계량에서 괄목할 만한 성공을 거두었다. 그 결과 중립벼와 단립벼 품종이 매우 다양해졌다. 대체적으로 볼 때, 벼 줄기는 작지만 이삭은 많이 열리는 벼 품종들이 많이 개발되었다. 그 외 관개기술, 기계화 등 벼농사와 관련된 제반 사항이 체계적으로 연구되었다. 캘리포니아주(州)는 벼를 재배하는 미국의 6개 주(州) 가운데 단위면적당 벼 생산성이 가장 높은 주(州)이다. 오늘날 캘리포니아주(州)가 단위면적당 벼 생산성에서 미국 뿐만 아니라 세계의 선두에 서 있는 것은 유리한 자연환경과 더불어 과학적인 연구에 힘입은 바가 크다.

  • PDF

온실재배 토마토의 증산모델 개발 및 검증 (Transpiration Modelling and Verification in Greenhouse Tomato)

  • 이변우
    • 생물환경조절학회지
    • /
    • 제6권3호
    • /
    • pp.205-215
    • /
    • 1997
  • 본 연구에서는 온실 재배 토마토 군락의 열수지에 근거한 증산모델을 구성하고 실험을 통하여 모텔에 필요한 계수의 추정과 모질의 검증을 수행하였다. 온실의 일사략과 엽-대기수증기압차(LVPD)를 매개변수로 하는 기공확산저항 추정식을 구성하여 기공작산저항 실측 자료를 이용하여 추정식의 계수를 추정하였다. 이 추정식으로 기공확산저항 변이의 80% 이상을 설명할 수 있었으며 추정식에 이용하지 않았던 독립 자료를 이용하여 검정한 결과 추정정도가 높아 증산예측 모델의 구성식으로 이용될 수 있는 것으로 판단되었다. 반투과성 매질의 복사 흡수이론을 적용한 Stanghellini의 식을 다소 변형하여 모델의 군락 순복사 추정식으로 사용하였으며 이 추정식에 의하여 계산된 순복사량은 실측치와 잘 일치하였다. 계수 추정에 사용하지 않았던 독립 자료를 이용하여 순복사 및 기공확산저항 추정식으로 구성된 증산예측 모델의 군락온도 및 증산예측 정도를 검증하였다. 모델에 의하여 계산된 군락 온도, 순간 증산속도 및 일 총 증산량은 실측치와 잘 일치하여 본 연구에서 작성된 증산 예측 모델은 온실 재배 토마토의 환경제어, 관개제어 등에 실용적으로 활용될 수 있을 것으로 판단되었다.

  • PDF

밭작물(作物)의 계획관개(計劃灌漑) 모형(模型) - 토양수분(土壤水分) 변화(變化)를 중심(中心)으로 - (Irrigation Scheduling Model for Dry Crops)

  • 안병기;김태철;정상인
    • 농업과학연구
    • /
    • 제14권1호
    • /
    • pp.68-80
    • /
    • 1987
  • 콩의 생육시기별(生育時期別) 증발산량(蒸發散量)과 토양수분(土壤水分) 변화량(變化量)을 추정(推定)하기 위한 토양수분추정모형(土壤水分推定模型)을 설정(設定)하였으며 라이시미터 실험(實驗)을 통한 실측치(實測値)와 비교(比較)한 결과(結果)는 다음과 같다. 1. 라이시미터 실험(實驗)을 통(通)하여 측정(測定)한 실제증발산량(實際蒸發散量)은 405.7mm 이었으며 Pan 증발량법(蒸發量法)과 Hargreaves식(式)에 의한 잠재증발산량(潛在蒸發散量)은 각각(各各) 547.8mm, 586.8mm이었다. 작물(作物)의 생육기간중(生育期間中) 작물계수(作物係數) K는 Table 1 과 같다. 2. 라이시미터 실험을 통한 전생육기간(全生育期間)(133일(日)) 동안의 실제증발산량(實際蒸發散量)은 405.7 mm이었으며 Pan 증발훈법(蒸發暈法)과 Hargreaves식(式)에 의해 추정(推定)된 실제증발산량(實際蒸發散量)은 각각(各各) 424.7mm, 426.1mm였다. 3. 콩의 생육기간별(生育期間別)로 10cm, 30cm, 50cm 깊이에서 관측된 토양수분변화(土壤水分變化)는 10 cm (첫 20cm 토층)에서는 변화(變化)가 크게 나타났으나 30 cm와 50 cm에서는 변화(變化)가 거의 없었다. 모형으로 추정(推定)된 토양수분변화(土壤水分變化)와 관측된 토양수분변화(土壤水分變化)사이에는 아직도 큰 차이가 있으므로 뿌리의 깊이별 토양수분소비형태(土壤水分消費形態)에 대한 연구(硏究)가 요구된다.

  • PDF

Penman-Monteith을 이용한 토마토와 파프리카의 증발산 모델 평가 (Assessment of Water Control Model for Tomato and Paprika in the Greenhouse Using the Penman-Monteith Model)

  • 솜늑 시리락;홍영신;김민영;이상규;백정현;곽강수;이현동;이재수
    • 생물환경조절학회지
    • /
    • 제29권3호
    • /
    • pp.209-218
    • /
    • 2020
  • ETc 손실을 보상하는데 필요한 물의 양을 작물 용수 요구량(Crop water requirement, CWR)로 정의되며, ETc 평가는 작물 필요 요구량을 정확하게 정량화하는 데 필요하며, 물 균형 계산에서 중요한 역할을 한다. 토마토와 파프리카의 실제 관수 요구량(Actual crop water, ACW)이 적절한 CWR인지 평가하였다. 토마토와 파프리카 재배에 적정한 AWC 예측 및 추정을 위하여 온실 내부 환경데이터를 Penman-Monteith을 이용하여 기준 작물 증발산(ET)을 계산한 후, 기준 증발산은 작물 상수(Kc;토마토-1.15, 파프리카-1.05)계수로 조정하였다. 토마토와 파프리카의 CWR과 ACW를 계산하여 비교 평가한 결과 ACW가 CWR을 대체할 수 있지만 파프리카의 ACW는 필요 이상으로 높게 나타났다. 또한, 토마토의 ACW는 1일 100 ~ 1,200 ml이고, 파프리카의 ACW는 1일 100 ~ 500 ml가 적절한 것으로 나타났다. 그러나, 스마트 온실에서 ETc의 정밀도를 높이려면, ETc가 CWR로 변환되고 ACW와 비교하기 위해서 클래스 A팬 설정이 필요하다. 향후 실시간으로 CWR을 측정하기 위한 시뮬레이션 프로그램 연구가 필요하다.

환자분류에 의한 일개 2차 의료기관의 간호업무량 조사;전산화를 위한 기초작업으로서 (Measurement of the Nursing Workload by Patient Classification System in a Secondary Hospital;As a Preliminary Step for Computerization of Nursing Staffing and Scheduling)

  • 박정호;조현;박현애;한혜라
    • 간호행정학회지
    • /
    • 제1권1호
    • /
    • pp.132-146
    • /
    • 1995
  • Even though Korean medical law stipulates that number of patients attended by a nurse is 2.5 for hospitalization and 30 for ambulatory care, the number of patients cared by a nurse per day is much greater than the standard prescribed by the medical law. Current productivity of nurses is not desirable unless the quality of care is considered. And nursing manpower staffing based on neither current nurses' productivity nor standard of medical law cannot respond properly to dynamic situation of the medical services. Under this background, the necessity of more efficient management of nursing manpower occupying 1/3 of total hospital workers has been recognized by many nursing administrators. Many nursing researchers have studied to foretell the nursing manpower objectively on the basis of measured nursing workload according to patient classification as well. Most of These researches, however, have been conducted in the tertiary hospitals, so it is imperative to conduct other researches to predict necessary nursing manpower in the secondary and the primary hospitals. The study was performed to measure nursing workload and predict pertinent nursing manpower to a secondary hospital with 400beds. Nursing workload was surveyed using measuring tool for direct and indirect care hours in a surgical unit and a medical unit. Survey was conducted from Sep.10 to Sep.16 and from Oct.5 to Oct.11, 1994 respectively by two skilled nurses, Subjects were patients, patients' family members and nursing personnels. Results are follows : 1. Patient classification distributed as 22% of class I (mildly ill patient), 57% of class II (moderately ill patient), and 21% of class III (acutely ill patient) in the medical nursing unit, while 23% of class I, 29% of class II, 12% of class III, and 36% of classIV (critically ill patient) in the surgical nursing unit. There was no difference of inpatient number between weekday and weekend. Bed circulation rate was 89% in both units and average patients number per day was 37.4 (total 42beds) in the medical nursing unit, 32.9 (total 37beds) in the medical nursing unit. 2. Direct care hours per day measured as 2.8hrs for class I, 3.3hrs for class II, and 3.5hrs for class III in the medical nursing unit, while 3.1hrs for class I, 3hrs for class II, 2.7hrs for class III, and 2.2hrs for classIV in the surgical nursing unit. Meanwhile, hours for nursing assistant activities per patient by patients' family members were 11mins and 200mins respectively. Direct care hour rate by shift was day 36%, evening 25%, and night 39% in the medical nursing unit, while 40%, 29%, and and 31% respectively in the surgical nursing unit. 3. Measurement and observation activity held 44.2% of direct care activities of nurses and medication 36.7%, communication 11.7%, exercise 1.8%, treatment 1.3%, hygiene 1.3%, elimination and irrigation 1.1%, suction 1%, nutrition 0.5%, thermotherapy 0.3%, oxygen therapy 0.1% in order. 4. Indirect care hours per day were 294.2mins in the medical nursing unit, and 273.9mins in the surgical nursing unit. By shift, evening was the highest in both units. Indirect care hours for each patient were 44.5mins in the medical nursing unit and 46mins in the surgical nursing unit. 5. checking activities including doctor's order, medication, and delivering patients to the next shift occupied 39.7% of indirect care activities, and preparation 26%, recording 23.8%, communication and conference 6.7%, managing equipments 2.1%, messenger activity 1.7% in order. 6. On the ground of these results, nursing manpower needed in a secondary hospital was estimated ; 27 nursing personnels for the medical nursing unit of 37beds, and 20 nursing personnels for the surgical nursing unit of 33beds.

  • PDF