• 한국의류학회지
• /
• 제11권1호
• /
• pp.79-85
• /
• 1987

The purpose of this study was to help the consumer about the care of nonwoven fabrics by investigation of the properties such as launderability. shrinkage, color fastness and strenth. Materials used were two types, soft and stiff, of commercial nonwoven fabrics. Deter-gents used were neutral detergents, synthetic detergents and dry cleaning solutions(perch-toro-ethylene) The results of this study were summerized as follows; 1. Laundering of nonwoven fabrics in low temperature is more ideal as morphological changes by laundering in high temperature were more prominent than that in low temperature. 2. Ironing of nonwoven fabrics wants more attention on environmental temperature as the rate of shrinkage in high temperature was higher than that in low temperature. Neutral detergents are more desirable as the rate of shrinkage of nonwoven fabrics by laundering with synthetic detergents was more prominent than that with neutral deter-gents. The rate of shringkage of nonwoven fabrics was not affected by dry cleanining. 3. Special care is wanted in order to prevent color transfer from non woven fabrics to polyester or wool during dry cleaning or laundering as the color fastness test show that color changes of nonwoven fabrics were not affected, but that color stain was increased on polyester or wool. 4. The strength was affected by composition of fibers and types of nonwoven fabrics, soft or stiff.

• 한국의류산업학회지
• /
• 제20권3호
• /
• pp.331-342
• /
• 2018

This paper enables stakeholders involved in textile industry to gain an overview of standards used for care labelling and help establish a common standard that could be used as a universal standard. This study provides a comprehensive and detailed analytical study of care labelling standards adopted by common countries in the textile market. It was found that the development of a universal system for care labeling could enhance the trade of textile articles and assist consumers in caring for textile articles. Universal care label systems could be characterized by two main features of inclusiveness and comprehensiveness. The range of instructions and symbols presented were found different among standards. Insignificant differences in symbols' shapes were found between standards for bleaching, ironing and professional cleaning. The washing process had the widest variety of instructions; in addition, options were provided by stated standards. Different meanings were found for similar shapes in some tumble drying symbols. The study findings show the importance of enhancing text based standards or the development of an understandable format across as many cultures as possible. The unification of symbols and meanings may be needed to provide global consumers consistent guidance. The efficiency of a detailed standard that provides and covers a wide range of instructions is an important aspect. The visibility and practicality of offering variable options/symbols in one standard is an important aspect for developing a universal care label system.

• 복식문화연구
• /
• 제4권3호
• /
• pp.337-347
• /
• 1996

The work-man's Uniform should be coincident with the image of his firm and accounted of the function according s its purpose. We made questions to 404 workers at 8firm in our country through the questionnaire papers to know about a work-man's uniform and researched whether the satisfactory in wearing his uniform had relation with his type of business, grade, carrier, age, marriage, and monthly income. The results of this study is as follows; 1. In the case of wearing the uniform many workers answered they always wore their uniform in the firm. It was shown that the office workers wore their uniform much more than workers in the production department. The longer the time working, the older age, the lower grade of school career are, he more workers wear. the order of the importance for he uniform was the function, the symbol, the originality, and the fashion. The longer their career in the firm was, the more important the function of their uniform was. 2. The order of dirty pat in taking care of the uniform was cuffs, color, the front of part in an upper garment and below the knee, the hip in pants It was very easy for the workers in the experts, or administrators and office workers than others to be dirty in the cuffs part of the uniform. Worn part of the uniform showed highest cuffs in an upper garment and a zipper in pants. The order of cleaning the uniform was washing by water, no ironing, and cleaning in their house.

• 한국주거학회논문집
• /
• 제14권3호
• /
• pp.101-108
• /
• 2003

Kitchen has been an essential space and plays an important role in the house regardless of culture and regional differences. However, due to social and economical changes, kitchen is no longer used only for preparing food and dining which seem to be a traditional function. The purpose of this study is to investigate the additional functions of the kitchen and figure out the related variables. The survey method was used to collect data from 321 housewives living in the apartment sized over 99$\textrm{m}^2$(30 pyung) in Ulsan. The data were analyzed by SPSS/$PC^+$ with frequency, percent, and chi-squared test. The results of this study were: (1) Kitchen was now used for eating snacks(45.6%), keeping household account(42.5%), and chatting(41.6%). (2) Homemakers wanted to do laundry such as ironing, drying clothes, and folding clothes in the kitchen. However, there were several activities(i.e., grooming, rest and taking a nap, exercise) they do not want to do in the kitchen. (3) The variables which related to the additional functions of the kitchen were size of the apartment, age, and level of education. The findings of this study imply that there must be design considerations for chatting and keeping household account such as providing tables and comfortable chairs. In addition, new counter layout types should be developed based on needs of additional functions and related variables.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.904-914
• /
• 2004

The fiber reinforced composite material is widely used in the multi-industrial field because of their high specific modulus and specific strength. It has two main merits which are to cut down energy by reducing weight and to prevent explosive damage proceeding to the sudden bursting which is generated by the pressure leakage condition. Therefore, Pressure vessels using this composite material can be applied in the field such as defence industry and aerospace industry. In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding of composite vessel subjected to internal pressure, the standard interpretation model is developed by using the ANSYS with AutoLISP and ANSYS APDL languages, general commercial software, which is verified as useful characteristic of the solution. Among the modules of the system, both the process planning module for carrying out the process planning of filament wound composite pressure vessel and the autofrettage process module for obtaining higher residual stress will minimize trial and error and reduce the period for developing new products. The system can serve as a valuable system for experts and as a dependable training aid for beginners.

• 한국생활과학회지
• /
• 제6권2호
• /
• pp.115-120
• /
• 1997

To investigate the cognition of labeling system and its problems, problems in laundry, and consumer's dissatisfaction and to decrease problems in management of clothing products, total 476 subjects were surveyed in Taejon. The major results were as follows ; 1. The cognition of labeling system was understood by 93.1% of respondents, and 72.9% of them prefer to recognized labeling by figures and letters than by either of them. Most of respondents got the knowledge of labeling system from school. The most frequently experienced mislabeling was the label for management. 2. In cleaning, 60.4% of respondents made their decisions of the laundry method after seeing labeling system. When the label recommanded either of hand washing or dry cleaning, they usually laundered with hand washing after a few times of dry cleaning. The first consideration factor for laundry was fiber composition of textiles. 3. About 70% of respondents understood ironing, laundry, and drying mark on labeling system, and 53.8% understood fiber composition and bleaching. 4. More than 90% of respondents experienced dissatisfaction in handling clothing products. The reason of dissatisfaction was deformation and decoloring after laundry. Most of respondents experienced change of tactile sensation, too.

• 소성∙가공
• /
• 제22권3호
• /
• pp.133-142
• /
• 2013

Recently, electric vehicles and hybrid cars are being promoted as alternatives to reduce automobile emissions. Generally, thin sheet materials such as aluminum alloy AA300X and cold-rolled steel sheet such as JIS-G-3141 are used for the container for the lithium-ion secondary batteries. In this study, a multi-stage deep drawing process is used to produce a rectangular cup from thin stainless steel sheet material, SUS409L, with an initial blank thickness of 0.4mm for the battery container application. Numerical simulations of the first through the fifth stages for the multi-stage deep drawing with thin SUS409L sheet were conducted using LS-Dyna3D Implicit/Explicit. Special consideration was given to the deformation characteristics due to the normal anisotropy of the sheet material. The numerical simulations were conducted with both isotropic properties and the anisotropic properties of the initial blank material. An unexpected forming failure, barreling in the bottom region of the deep drawn rectangular cup, was observed. This failure mode can be avoided by additional ironing thickness control during the process.

• 소성∙가공
• /
• 제22권2호
• /
• pp.86-92
• /
• 2013

When stamping ultra-high-strength steel (UHSS), the phenomenon of galling, which corresponds to a transfer of material from the sheet to the tool surface, occurs because of the high contact pressure between tool and workpiece. Galling leads to increased friction, unstable interface conditions, scratches on the sheet and the tool surfaces and, eventually, premature tool surface failures. Therefore, a simple and accurate evaluation method for tool scratching is necessary for the selection of tool material and coating, as well as for a better optimization of process conditions such as blank holder force and die radius. In this study, the pin-on-disc (PODT) and pin-on-flat surface (POFST) tests are conducted to quantitatively evaluate scratch-related tool life for stamping of UHSS. The variation of the friction coefficient is used as an indicator of scratch resulted from galling. The U-channel ironing test (UCIT) is performed in order to validate the results of the friction tests. This study shows that the POFST test provides a good quantitative estimation of tool life based on the occurrence of scratch.

• 한국환경과학회지
• /
• 제27권9호
• /
• pp.781-788
• /
• 2018

The volatile odor compounds emitted form a stuffing agent production process were quantified by ATD and GC-MS, and then odor causing compounds were identified by the method of EOI using each TLV. As the results, 72 odor compounds were detected and total concentration was turned up 87.6 ppmv level. In these compounds, aldehyde group is higher 45.49 ppmv than others group, the next is turn up the order of aliphatics, alcohols, esters, ketones. The EOA of aldehyde group show up 101,720 and 97.2%, respectively, the odor causing compounds were identified each of odor 2-Octenal 28.31%, Hexanal 24.06%, Valeraldehyde 16.07%, Butyraldehyde 9.69%, Heptanal 4.97%, Propionaldehyde 4.64%, Acetaldehyde 3.31%. The TLVs of 7 major odor compounds are lower value level of 0.001~0.0001 ppmv, odor causing even in trace level. We need to be concerned with reduction of aldehyde compounds in the odor problem by a stuffing agent production process or ironing process of the textile containing a stuffing agent.

• 가정과삶의질연구
• /
• 제23권6호
• /
• pp.1-13
• /
• 2005

The aim of this study is to investigate the housework space viewed from housewives and husband in dual-earner families. For this study, depth-interview method were used to collects the data. The depth-interview were conducted on the eight heusewives and two husbands in dual-earner families in Jinju and Gwangju in April 2005. The narratives were then analyzed to discover the demands of the kitchen and laundry room. The major results were as follows: 1) Dual-earner families want the kitchen design is they can share housework with their spouses, such as kitchen facing the front side of the floor plan and island counter. In addition, they want spacious, adjustable(flexible), visible storage to enable the housewives to work with their spouse efficiently. Space for Kimchi refrigerator should be considered in the kitchen. 2) They want the noise-free laundry because the interviewers did their laundry work in the night time. Also, they want a multi-purpose laundry mm where machine washing, hand washing, drying and ironing can be done. In addition, for hand-washing wives and husbands, specific space and facilities where they can hand washing on stand posture were needed.