• Journal of Nutrition and Health
• /
• v.35 no.1
• /
• pp.90-101
• /
• 2002

This study was undertaken to investigate the nutrient intake, dietary behavior, perception of body image and iron deficiency of high school adolescent girls. The subjects were 463 high school girls in Inchon. This cross-sectional survey was conducted by questionnaires and data were analysed by SAS program. Nutrient intakes collected from 3 day-retails were analyzed by the Computer Aided Nutritional Analysis Program. The following anthropometric measurements were made on all participants height, weight, body fat (%), skinfold thirkness, subscapular skinfold thickness, mid-upper arm circumference and waist-hip circumference. Blood samples were obtained and analyzed for iron nutritional status. The mean obesity index of rural students were highest among students. However, over 18% of the urban and rural students belonged to the low-weight group. Proportions of skipping meals were most high in urban vocational students and the main reason was lack of time for meal. Most nutrient intakes of the students were below the RDA, in particular calcium, iron, vitamin A and vitamin B$_2$. Most of the students were concerned with body image and weight control. Also they were not satisfied with their body image. The mean fell hemoglobin and transferrin saturation of rural students were lowest among students. The total binding capacity of urban vocational student\ulcorner were Invest among students. Prevalence of iron deficiency was most high in urban general students when judged by Hb, MCV and serum ferritin. In conclusion, this study indicates that nutrient intake in the female high school students was considerably lower than RDA. They should also be notified that severe weight control is very harmful for health. And they had lower self -satisfaction for their body image and undesirable flood habits. Therefore, prefer nutrition education is required to maintain desirable flood habits and improve their iron status in female high school students.

• Nutritional Sciences
• /
• v.7 no.2
• /
• pp.83-87
• /
• 2004

To investigate the effects of dietary phytate reduction and zinc supplementation on biochemical iron parameters in elderly Korean women consuming inadequate iron, fifteen healthy women aged 64-75 years were recruited for a feeding study. A high-phytate diet (27.8 phytate:zinc molar ratio) was provided for 9 days, followed by a nine-day low-phytate diet(12.3) and a subsequent 28-day period of unregulated meals with zinc supplementation (22 mg/d as zinc gluconate). Serum iron increased significantly with the low-phytate diet (130.4 $\mu g$/L) but returned to the level observed during the high-phytate diet (113.0 $\mu g$ /L) period when subjects were taking zinc supplements (105.8 $\mu g$ /L). However, serum ferritin in the subjects decreased significantly with the low-phytate diet (73.8 $\mu g$ /L) as well as with zinc supplementation (57.2 $\mu g$ /L), compared to levels following consumption of the high-phytate diet (89.6 $\mu g$ /L). Transferrin receptor and transferrin saturation were unchanged with the treatments. In summary, zinc supplementation might result in deteriorated iron status in elderly Korean women who consume inadequate iron, while there was no significant effect from reducing dietary phytate.

• Journal of Korean Society on Water Environment
• /
• v.18 no.4
• /
• pp.379-386
• /
• 2002

In this study, estimation model for iron compound originated from upflow, anaerobic fixed bed reactor, which treats sewage domestic wastewater, was developed. The estimation model was formulated by a mathematical expression which was based on the mass balance. Below the HRT of 60 minute, sulfide concentration combining with iron $FeS_2$ is the highest because the maximum sulfate consumption rate $V_{maxS}$ and half-saturation constant of sulfate $K_{mS}$ exert an important effect on the estimation model as temperature was increased. But increment of $FeS_2$ concentration is weakened above the HRT of 60 minutes and represent the lowest value at the HRT of 108 minutes. It implies that liquid phase distribution ratio of sulfide ${\alpha}r$ becomes lower as temperature was increased. While phosphorus concentration combining with iron $Fe_3(PO_4)_3$ is increased as HRT and temperature are increased, which is affected by phosphorus removal rate constant $k_p$. As the result of estimating the iron concentrations of corrosion by the model, the concentration of iron corrosion is higher than any other at the HRT of 108 minute and $20^{\circ}C$. The predicted values were compared with measured ones at different HRT(13.5, 27, 54, 108 min) and temperature(20, 25, $30^{\circ}C$). The experimental data could be fitted with the simulated curves. Therefore, the mathematical expression could be applicable to design full-scale wastewater treatment plants.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.561-566
• /
• 2016

In this paper, effective design method of linear induction motor(LIM) for Maglev is proposed in order to maximize system efficiency of Maglev. For the high system efficiency of Maglev, it is important to minimize weight of traction motor. Light weight design by changing materials of core and winding is conducted without changing volume of LIM. For the silicon steel core of primary part for magnetic flux path, iron-cobalt alloy steel with high magnetic saturation characteristic compared to silicon steel is suggested. Moreover, aluminium winding with light weight instead of copper winding is wounded in the widen slot area due to the high magnetic saturation level. For the verification of performance of proposed model, the characteristics are analyzed by using finite element method(FEM).

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.154-157
• /
• 2000

Superconducting tape easily can applied to distribution of electricity. It designs basic model of Saturable Reactor type Fault Current Limiter which used superconducting tape, and observes a specific character by means of simulation. Saturable Reactor type Fault Current Limiter is not influenced by saturation of Magnet core appeared in Induction Fault Current Limiter, because it exploit saturation of Iron core. But, it is possible that superconducting tape quenched when AC current flow to superconducting tape which biased DC voltage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.361-366
• /
• 2007

In the distribution networks, it is necessary to develop small and light voltage and current sensor for compact and digitalized switchgears. For this purpose, some researches have been continuing till now, CT(current transformer) and VT(voltage transformer) are one of that research. But conventional CT and VT have some problems, that is, have big size and saturation characteristics because of used to iron core. In this paper, CS(current sensor) and VS(voltage sensor), have some merits measuring of current and voltage magnitude as a alternated conventional equipment, were studied. So, this paper shows the process CS and VS design method, equivalent circuit and output result, respectively. As a result of this test, proposed CS and VS have linearity for the output, no saturation.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.628-630
• /
• 1995

CT saturation may cause protective relays to malfunction. The conventional method to deal with the problem is overdimensioning of the core so that CTs can carry up to 20 times the rated current without exceeding 10 % ratio correction. However, this not only reduces the sensitivity of relays, but also increases the CT core size. This paper presents a technique of estimating the secondary current corresponding to the CT ratio under CT saturation using the magnetization curve. The proposed algorithm can improve the sensitivity of relays to low level faults and minimize the instability of relays for external faults.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.476-478
• /
• 1995

The conventional technique to deal with CT saturation is overdimensioning of the core so that CTs can carry up to 20 times the rated current without exceeding 10% ratio correction. However, this not only reduces the sensitivity of relays, but also increases the CT core size in proportion to the expected maximum fault current to avoid CT saturation. This paper presents a technique of estimating the secondary current corresponding to the CT ratio which can reduce the required CT core cross section significantly.

• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.96-99
• /
• 2012

The change of saturation magnetization in boronized low carbon microalloyed steels was investigated as a function of boronizing time. Specimens were boronized in an electrical resistance furnace for times ranging from 3 to 9 h at 1123 K. The metallurgical and magnetic properties of the specimens were investigated using optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). A boride layer with saw-tooth morphology consisting of FeB and $Fe_2B$ was observed on the surface, its thickness ranged from 63 ${\mu}m$ to 140 ${\mu}m$ depending on the boronizing time. XRD confirmed the presence of $Fe_2B$ and FeB on the surface. The saturation magnetization decreased with increasing boronizing time. This decrease was attributed to the increased thickness of the FeB and $Fe_2B$ phases. Cracks were observed at the FeB/$Fe_2B$ interfaces of the samples. The number of interfacial cracks increased with increasing boronizing time.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.231-237
• /
• 2000

The commercial cermet cutting tools consist of multi-carbide and a binder metal of iron group, such as cobalt and nickel which are ferromagnetic. In this paper, a new approach to evaluate the mechanical properties of TiCN based cermet by magnetic properties were studied in relation to binder content and sintering conditions. The experimental cermet was prepared using commercial composition with the other binder contents by PM process. It was found that the magnetic properties of the sintered cermets remarkably depended on the microstructure and the total carbon content. The magnetic saturation was proportional to increment of coercive force. At high carbon content in sintered cermet, the magnetic saturation was increased by decreasing the concentration of solutes such as W, Mo, Ti in Co-Ni binder. As the coercive force increases, the hardness usually increases. The strength and toughness of the cermet also increased with increasing the magnetic saturation. The measurement of magnetic properties made it possible to evaluate the mechanical properties in the cermet cutting tools.