• Membrane Journal
• /
• v.25 no.5
• /
• pp.385-390
• /
• 2015

To determine the pervaporation separation characteristics of IPA/water mixtures, PEI/PDMS hollow fiber membrane module commercialized by Airrane Co. was subjected to both lab and pilot tests. The flux of $0.52kg/m^2h$ and IPA concentration of 68.5% at $25^{\circ}C$ were obtained whereas the $1.368kg/m^2h$ and 61.2% were measured at $55^{\circ}C$. In order to realized the durability of the module, the long-term test (at $50^{\circ}C$) of 100 days has been conducted and as a result, the flux $1.03{\sim}1.15kg/m^2h$ and IPA concentration 61.8~62.5% were maintained with the initial values.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.8
• /
• pp.1085-1089
• /
• 2001

Metabolites, such as isopropyl alcohol (IPA) produced by rumen fermentation, were intravenously infused into a jugular vein of goats during feeding to explore the mechanism and roles of IPA in ruminating behavior (number of boli and ruminating time). Three female goats were confined in metabolism cages with a stanchion, The ruminating behavior measured by the number of ruminations, ruminating time, number of remastications, and remasticating time decreased (p<0,05) with intravenous IPA infusion. The IPA concentrations and VFA concentrations increased in the blood circulation. Our data suggest that sensitive receptors of rumination to IPA are more likely to be in an area such as the brain stem where they can respond to blood metabolite levels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.334-337
• /
• 1996

Si anisotropic etching is a key technology for micromachining. The main advantages of tetramethyl ammonium hydroxide (TMAH)-based solution are their full compatibility with IC process. In this work the anisotropic etching of single crystal Si in a TMAH (($CH_3$)$_4$NOH) based solution was studied. The influence of the addition of IPA to TMAH solution on their etching characteristics was also presented. The crystal planes bounding the etch front and their etch rates were determined as a function of temperature, crystal orientation, and etchant concentration. The etch rates of (100) oriented Si crystal planes decreased linearly with increasing the IPA concentration, The etched (100) planes were covered by Pyramidal-shaped hillocks below 15 wt.%, but very smooth surfaces were obtained above 20 wt.%. The addition of IPA to TMAH solution leads to smoother surfaces of sidewalls etched planes.

• Korea Journal of Hospital Management
• /
• v.14 no.2
• /
• pp.21-40
• /
• 2009

The importance-performance analysis (IPA) is a widely used analytical technique that produces a priority of managerial attention for the customer satisfaction. This study attempted to compare various different approaches of IPA such as direct and indirect measurement of importance, and traditional four quadrants grid model and diagonal grid model of IPA. Data on 17 inpatient service quality attributes were collected from 234 inpatients of a general hospital. Eight IPA grids were produced to compare the result of each model. Based on the study results the strength and weakness of each model were discussed, and a set of recommendations for practical application of the IPA in hospital settings was suggested.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.3
• /
• pp.77-88
• /
• 2023

This study focuses on hotel kiosks that have begun to be introduced in earnest in mid-priced hotels, and the quality attributes of hotel kiosks, which are expected to be introduced throughout the hotel industry in the future, and validates them using a revised IPA(Importance-Performance Analysis). An online survey was conducted targeting hotel users who had used hotel kiosk devices, and difference analysis and IPA analysis were conducted on 239 people, excluding 61 who responded insincerely. As a result of the verification, there was no significant difference in hotel kiosk quality attributes by age, but there was no significant difference by age. It was found that there was a significant difference. As a result of analyzing the difference between importance and satisfaction, it was found that there was a partially significant difference. These results suggest standards for quality attributes in hotel kiosks and provide academic implications for future research and practical implications for hotel management practitioners.

• Journal of Agricultural Extension & Community Development
• /
• v.30 no.4
• /
• pp.213-227
• /
• 2023

This paper aims to examine the farmers' perceptions of the importance and feasibility of climate change awareness and adaptive measures in agriculture, utilizing paired sample t-tests and Importance-Performance Analysis (IPA). Significant differences were found in farmers' views on the importance and urgency of climate change issues, with specific factors standing out. The IPA analysis identified key issues requiring sustained attention, including climate change magnitude, extreme weather events, livestock damage scale, pest fluctuations, and variability in flowering periods. Additionally, the study revealed significant disparities in farmers' perceptions of the importance and feasibility of adaptive measures, except for specific items related to heat indices.

• Korean Journal of Materials Research
• /
• v.16 no.2
• /
• pp.99-105
• /
• 2006

This paper reports an improved bonding method using the IPA (isopropyl alcohol) assisted low-temperature bonding process for the PMMA (polymethylmethacrylate) micro CE (capillary electrophoresis) chip. There is a problem about channel deformations during the conventional processes such as thermal bonding and solvent bonding methods. The bonding test using an IPA showed good results without channel deformations over 4 inch PMMA wafer at $60^{\circ}C$ and 1.3 bar for 10 minutes. The mechanism of IPA bonding was attributed to the formation of a small amount of vaporized acetone made from the oxidized IPA which allows to solvent bonding. To verify the usefulness of the IPA assisted low-temperature bonding process, the PMMA micro CE chip which had a $45{\mu}m$ channel height was fabricated by hot embossing process. A functional test of the fabricated CE chip was demonstrated by the separation of fluorescein and dichlorofluorescein. Any leakage of liquids was not observed during the test and the electropherogram result was successfully achieved. An IPA assisted low-temperature bonding process could be an easy and effective way to fabricate the PMMA micro CE chip and would help to increase the yield.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.69-78
• /
• 2012

This paper surveys the physical properties of the MWNT dispersion solution dispersed with the three types of solvents and of the polyurethane composite film for improvement of mechanical properties and electrical characteristics of PU/MWNT composite film. For this purpose, the MWNT dispersed solution was mixed with three types of solvent such as IPA, MEK and Toluene and then mixed with polyurethane (100part) with variation of loading content (0, 10, 20, 30, 40, 50 part) of MWNT dispersed solution in the ultrasonic wave dispersion apparatus. And eighteen PU/MWNT composite films were prepared as specimens. The various physical properties of these PU/MWNT films were measured and discussed with the loading content of three types of MWNT dispersed solutions. The highest absorbancy among the three types of dispersed solutions was shown in the IPA/MWNT solution. But the absorbancy of PU/MWNT films was not same as the solution. The low electrical surface and volume resistivity of PU/MWNT film were shown at the condition of 20 and 10 parts loading of IPA/MWNT dispersed solution, respectively. The low triboelectricity of PU/MWNT film was shown at the condition of above 30part loading of IPA/MWNT dispersed solution. The breaking strength and strain of PU/MWNT film prepared with IPA/MWNT dispersed solution were decreased with increasing loading content of IPA/MWNT from 10 to 40 parts. The maximum breaking strength and breaking strain according to the dispersion solution were shown on the IPA/MWNT dispersed solution. The uniform dispersion of PU/MWNT film according to the loading content of MWNT solution was shown by surface image analysis on the films dispersed with IPA.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.172-177
• /
• 2010

The values of the AIT (autoignition temperature) for fire and explosion protection are normally the lowest reported. The MAITB (Minimum Autoignition Temperature Behavior) of flammable liquid mixture is exhibited when the AITs of mixture is below the AIT of the individual components. The MAITB is an interesting experimental features, which can be significant from the perspective of industrial fire safety. In this study, the AITs of toluene + iso-propanol(IPA) and p-xylene + n-butanol systems were measured using ASTM E659-78 apparatus. The AITs of toluene, iso-propanol (IPA), pxylene and n-butanol which constituted two binary systems were $547^{\circ}C,\;463^{\circ}C,\;557^{\circ}C$ and $340^{\circ}C$ respectively. The toluene + iso-propanol(IPA) system is exhibited MAITB at 0.3 mole fraction of toluene, and its minimum autoignition temperature was $460^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.278-292
• /
• 2019

The purpose of this study is to provide a suggestion to improve speciality and job performance of social work case management using importance-performance-analysis(IPA). A quantitative research design was used and data were collected from 209 social workers who are in charge of case manager job at Ulsan metropolitan area. Study participants were asked the recognition of importance-job competence and need for supervision-experience of social work case management job description on the NCS(9 competency units, 33 competency units). Descriptive analysis and IPA were performed. This study found the need for intensified job competence of 'building external operating systems' and 'development of resource linkage systems'. Also, it is necessary to provide intensive supervision for 'building an external and internal operating system.' Based on the results, future direction of intensified job performance for socla work case management was discussed.