• Journal of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.270-276
• /
• 1976

The absorption spectra and the dissociation constants of various sulfophthaleins have been measured in the presence of a cationic surfactant. In the presence of 2.0 ${\times}$ 10-3 M zephiramine and an ionic strength of 0.05 at 25${\pm}1^{\circ}C$ the absorption maxima of the basic forms are shifted to red by 6${\sim}$21 nm and their molar absorptivities are increased, while the absorption maxima of the yellow forms are shifted to blue by 4${\sim}$20 nm and their molar absorptivities are decreased. The decreases in pKa values are of the order of ranging -1.38${\sim}$0.37. The characteristic of the observed changes has been explained by the assumption that the dye molecule adsorbed on micellar surface forms a stable coplanar structure easily and then the conjugation in the dye molecule is elevated.

• Mass Spectrometry Letters
• /
• v.15 no.1
• /
• pp.54-61
• /
• 2024

An improved voltage modulation method (VMM) was used to control the heat release and adsorption properties of the adsorbent. In this work, the voltage and flux modulation methods were considered under unified experimental conditions of dissociative surface ionization (SI) of polyatomic organic molecules, the criteria were found when under VMM conditions the current relaxation of SI carries information about the kinetic properties of thermal desorption of ionizable dissociation particles arriving on the surface of polyatomic molecules. Conditions were found under which the relaxation of the ionic current in the flux modulation method is determined by the kinetics of the heterogeneous dissociation reaction of the original polyatomic molecules. The values of the thermal desorption rate constant K⁺ and the activation energy E⁺ obtained with VMM for desorption of (CH₃)₂NCH⁺₂ ions with m/z 58 by adsorption of imipramine and amitriptyline molecules agree well with each other and with the results for the desorption of the same ions by adsorption of other molecules. This confirms one of the basic conditions for the equilibrium process SI - the a degree (β coefficient) of the same particles SI on the same emitter surface is the same and does not depend on the way these particles are formed on the emitter surface.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3327-3334
• /
• 2013

Infrared multiphoton dissociation (IRMPD) spectra of various protonated 1,2-diaminoethane-water clusters DAE-$H^+-(H_2O)_n$ (n = 1-6) were measured in the wavelength range of 3000-3800 $cm^{-1}$. The IRMPD spectra of the well separated ionic clusters were simulated by the MP2 method employing various basis sets. Comparison of the IRMPD spectra with the theory indicates that each cluster may exist as several low-lying conformers, and the sum spectra of the various conformers reveal almost one to one correspondence between theory and experiment. Free N-H and O-H stretches are observed in the ranges of 3400-3500 and 3600-3800 $cm^{-1}$, respectively. The $O-H{\cdots}N$ and $N-H{\cdots}O$ stretches are, however, observed in the broad region of 3000-3600 $cm^{-1}$. The theoretical calculations on DAE-$H^+-(H_2O)_n$ (n = 1-4) show gradual decrease of the average binding energy between DAE-$H^+$ and $H_2O$ as the cluster size increases, attaining the lowest value of 55 kJ/mol when n = 4. We found a low energy barrier of 21 kJ/mol to the isomerization converting the lowest energy cluster of DAE-$H^+-(H_2O)_n$ to the second lowest one.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.22-29
• /
• 1997

Poloxamer-poly (acrylic acid) (PAA) interpenetrating polymer networks (IPNs) were prepared via matrix polymerization of acrylic acid with poloxamer prepolymer. The equilibrium s welling of poloxamer/PAA IPNs was determined in various pH medium. The swelling of poloxamer/PAA IPNs was more affected by pH difference compared with the swelling of homo PAA gel due to protonation and deprotonation of the PAA network, followed by reversible formation and dissociation of the interpolymer complex due to hydrogen bonding between acidic hydrogens and ether oxygens. Nonionic/anionic/cationic drugs were incorporated into IPN matriceds as a model drug and their release behavior was studied. Nonionic, drug revealed release patterns depending solely on pH dependent swelling kinetics. In contrast, the release of ionic drugs was significantly affected by ionic drug-polymer interaction as well as the swelling kinetics.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.165-169
• /
• 2010

Recently supramolecular network thermo-reversible crosslinking elastomer having flexibility, various functionality, and advantages of thermoplastic elastomer (TPE) such as recycle and easy processbility is introduced. Although thermo-reversible bonds such as hydrogen bond and ionic cluster is recognized as a common technology since 1990, control technology of bonding and dissociation of crosslink in supramolecular network is a recent technology. In this review, characteristics of thermo-reversible crosslinking elastomer having rheological properties of TPE and reinforcing behaviors of thermoset elastomer are summarized.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.8
• /
• pp.830-835
• /
• 1998

The characteristics of the ablation plume generated by 532 nm Nd: YAG laser irradiation of a Pb(Zr0.52Ti0.48)O3 (PZT) target have been investigated using a pulsed-field time-of-flight mass spectrometer (TOFMS). The relative abundance of O+, Ti+, Zr+, Pb+, TiO+, and ZrO+ ions has been measured and discussed. TiO+ and ZrO+ ions were also found to be particularly stable within the laser ablation plasma with respect to PbO+ species. The behavior of the temporal distributions of each ionic species was studied as a function of the delay time between the laser shot and the ion extraction pulse. The most probable velocity of each ablated ion is estimated to be Vmp=1.1-1.6x 105 cm/s at a laser fluence of 1.2 J/cm2, which is typically employed for the thin film deposition of PZT. The TOF distribution of Ti+ and Zr+ ions shows a trimodal distribution with one fast and two slow velocity components. The fast velocity component (6.8x 10' cm/s) appears to consist of directly ablated species via nonthermal process. The second component, originated from the thermal evaporation process, has a characteristic velocity of 1.4-1.6 x 105 cm/s. The slowest component (1.2 x 105 cm/s) is composed of a dissociation product formed from the corresponding oxide ion.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.335-450
• /
• 1986

The thermodynamic dissociation constants of $[Co(en)]_3Cl_3\;and\;[Co(NH_3)_6Cl_3$ in aqueous solutions at $25{\circ}$ and at the pressure from 1 bar to 2000 bars were measured by conductometric method. The dissociation constants were increased with pressure elevation because of volume decreasing by the formation of charged ions during dissociation reaction. That is, the $pK^T$ values of $[Co(en)]_3Cl_3$ were 2.16 for I bar, 2.08 for 500 bars, 2,08 for 1000 bars, 2.05 for 1500 bars and 2.03 for 2000 bars, respectively and those of $[Co(NH_3)_6Cl_3$ were 2.02 for 1 bar 1.96 for 500 bars, 1.90 for 1000 bars, 1. 88 for 1500 bars and 1. 87 for 2000 bars, respectively. Comparing and analyzing the values of Stokes' radii and $K^T$, the formation of ion pair compound was affected by not only the electrostatic interaction, but also the Interal Conjugate Base(ICB), which was increased by the elevation of the pressure.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.588-590
• /
• 2008

The thermal signature of nucleation process is characterized by the induction time, the degree of supercooling, and the equilibrium temperature depression. The initiation of nucleation presents stochastic characteristics. The factors that affect nucleation are mechanical impact, ionic concentration, mineral surface characters, and pore size. Hydrate-bearing sediments behave mechanically like other cemented sediments. The data set has important implications for the calibration and interpretation of geophysical measurements and downhole logs collected in gas hydrate provinces, providing particular insight for the interpretation of P- and S-wave data and resistivity logs. In addition, laboratory formation history and ensuing pore-scale spatial distribution likely have a more pronounced effect on the macroscale mechanical properties of hydrate-bearing sediments

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.581-586
• /
• 2007

Cast DNA/polyethyleneimine (PEI) blend membranes containing different amounts of DNA were prepared using acid-base interaction and characterized with the aim of understanding the polymer electrolyte membrane properties. Two different molecular weights of PEI were used to provide the mechanical strength, while DNA, a polyelectrolyte, was used for the proton transport channel. Proton conductivity was observed for the DNA/PEI membrane and reached approximately $3.0{\times}10^{-3}S/cm$ for a DNA loading of 16 wt% at $80^{\circ}C$. The proton transport phenomena of the DNA/PEI complexes were investigated in terms of the complexation energy using the density functional theory method. In the case of DNA/PEI, a cisoid-type complex was more favorable for both the formation of the complex and the dissociation of hydrogen from the phosphate. Since the main requirement for proton transport in the polymer matrix is to dissociate the hydrogen from its ionic sites, this suggests the significant role played by the basicity of the matrix.

• Journal of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.141-145
• /
• 1970

The reduction of Mo-thiocyanate (V) complex on dropping mercury electrode has been studied at ionic strength 0.6 with pH less than 2.3. D-C polarogram obtained from acidic solutions are reversible, diffusion controlled current. The electrode reaction of Mo-thiocyanate(V) may be represented as follows. $MoO(SCN)_3\;+\;2H^+\;+\;2e\;{\to}\;Mo(SCN)_2{^+}\;+\;H_2O\;+\;SCN^-$From this reaction, the half wave potential assumed to be $E_{1/2}\;=\;E_0'\;-\;0.059\;pH\;-\;0.03\;log{\;frac{[Mo(SCN)_2{^+}][SCN^-]}{[MoO(SCN)_3]}}$Considering the dissociation of this complex, however, it was estimated that the electrode reaction may be written by. $MoO^{+3}\;+\;3SCN^-\;+\;2H^+\;+\;2e\;{\to}\;Mo(SCN)_2{^+}\;+\;SCN^-\;+\;H_2O$.