• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.149-150
• /
• 2006

A ZnO nanowire-based FET is fabricated m this study on a flexible substrate of PES. For the flat and bent flexible substrates, the current ($I_D$) versus drain-source bias voltage ($V_{DS}$) and $I_D$ versus gate voltage ($V_G$) results are compared. The flat band was Ion/Ioff ratio of ${\sim}10^7$, a transconductance of 179 nS and a mobility of ~10.104 cm2/Vs at $V_{DS}$ =1 V. Also bent to a radius curvature of 0.15cm and experienced by an approximately strain of 0.77 % are exhibited an Ion/Ioff ratio of ${\sim}10^7$, a transconductance of ~179 nS and a mobility of ${\sim}10.10 cm^2/Vs$ at $V_{DS}$ = 1V. The electrical characteristics of the FET are not changed very much. although the large strain is given on the device m the bent state.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1297-1298
• /
• 2006

Omega-shaped-gate (OSG) nanowire-based field effect transistors (FETs) have been attracted recently attention due to their highdevice performance expected from theoretical simulations among nanowire-based FETs with other gate geometries. OSG FETs with the channels of ZnO nanowires were successfully fabricated in this study with photolithographic processes. In the OSG FETs fabricated on oxidized Si substrates, the channels of ZnO nanowires with diameters of about 60 nm are coated surroundingly by $Al_{2}O_{3}$ as gate dielectrics with atomic layer deposition. About 80 % of the surfaces of the nanowires coated with $Al_{2}O_{3}$ is covered with gate metal to form OSG FETs. A representative OSG FET fabricated in this study exhibits a mobility of 98.9 $cm^{2}/Vs$, a peak transconductance of 0.4 ${\mu}S$, and an Ion/Ioff ratio of $10^6$ the value of the Ion/Ioff ratio obtained from this OSG FET is the highest among nanowire-based FETs, to our knowledge. Its mobility, peak transconductance, and Ion/Ioff ratio arc remarkably enhanced by 11.5, 32, and $10^6$ times, respectively, compared with a back-gate FET with the same ZnO nanowire channel as utilized in the OSG FET.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.885-890
• /
• 1996

Undoped p-type and Te doped n-type GaSb crystals were grown by the vertical Bridgman method. The lattice constant of the GaSb crystals was 6.096.+-.000373.angs.. The carrier concentration, the resistivity, and the carrier mobility measured by the van der Pauw method were p.iden.8*10$^{16}$ c $m^{-3}$ , .rho..iden.0.20 .ohm.-cm, .mu.$_{p}$ .iden.400c $m^{2}$ $V^{-1}$ se $c^{-1}$ for p-type, n.iden.1*10$^{17}$ c $m^{-3}$ , .rho..iden.0.15 .ohm.-cm, .mu.$_{n}$ .iden.500c $m^{2}$ $V^{-1}$ se $c^{-1}$ for n-type at 300K. In case of treatment with metal ion of R $u^{+3}$, P $t^{+4}$, the carrier concentration, resistivity and carrier mobility of the GaSb crystals were p.iden.2*10$^{17}$ c $m^{-3}$ , .rho..iden.0.08.ohm.-cm, .mu.$_{p}$ .iden.420c $m^{2}$ $V^{-1}$ se $c^{-1}$ for p-type, n.iden.2.5*10$^{17}$ c $m^{-3}$ , .rho..iden.0.07.ohm.-cm, .mu.$_{n}$ .iden.520c $m^{2}$ $V^{-1}$ se $c^{-1}$ for n-type respectively. GaSb crystals had a tendency to lower resistivity and higher mobility, for surface treatment with metal ion effectively diminished surface recombination centers.s.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.191-196
• /
• 2001

GaN is a key material for blue and ultraviolet optoelectronics. Postannealing process was employed to investigate the structural change and the effect on electrical property of the GaN thin film grown on reactive ion beam(RIB) treated sapphire (0001) substrate. Full width half maximum (FWHM) of double crystal x-ray diffraction (DCXRD) spectra and Hall mobility of the specimen were significantly changed depending on the postannealing time at $1000^{\circ}C$ in N2 atmosphere. FWHM of DCXRD reduced upto about 50arc-sec and the mobility increased about $80\textrm{cm}^2$/V.sec. The postannealed specimen with the best mobility was compared with sample without annealing by TEM. The former sample showed a decrease in the lattice strain and reduction of dislocation density by about 56~59%. This implies that there is a strong correlation between crystalline quality and the electrical property of the film. The Present results clearly show that the combination of RIB pretreatment and proper post annealing conditions results in the improved properties of GaN films grown by MOCVD.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.212-222
• /
• 1992

To use polycrystalline Si Thin Film Transistor (poly-Si TFT) in high density SRAM instead of High Load Resistor (HLR), TFT is needed to show good electrical characteristics such as large carrier mobility, low leakage current, high driver current and low subthreshold swing. To satisfy these electrical characteristics, the trap state density must be reduced in the channel poly. Technological issues pertinent to the channel poly fabrication process are investigated and discussed. They are solid phase growth (SPG), Si-ion implantation, laser annealing and hydrogenation. The electrical properties of several CVD oxides used as the gate oxide of TFT are compared. The dependence of the electrical characteristics of TFT on source-drain ion-implantation dose, drain offset length and dopant lateral diffusion are also described.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.407-413
• /
• 2005

Ion implantation provides a unique way to modify the mechanical, optical and electrical properties of polymer by depositing the energy of ions in the material on the atomic scale. Implantation of ions into the polymers generally leads to a radiation damage, which, in many cases, modifies the properties of the surface and bulk of the material. These modifications result from the changes of the chemical structure caused in their turn by changing the chemical bonding when the incident ions cut the polymer chains, breaks covalent bonds, promotes cross-linking, and liberates certain volatile species. We studied the relation among the linear energy transfer (LET) and changes of surface microstructure and surface resistivity on PPS material using the high current ion implantation technology The surface resistivity of nitrogen implanted PPS decreased to $10^{7}{\Omega}/cm^{2}$ due to the chain scission, cross linking, ${\pi}$ electron creation and mobility increase. In this case, the surface conductivity depend on the 1-dimensional hopping mechanism.

• Journal of Industrial Technology
• /
• v.40 no.1
• /
• pp.13-18
• /
• 2020

Lithium-ion batteries have a small volume, light weight and high energy density, maximizing the utilization of mobile devices. It is widely used for various purposes such as electric bicycles and scooters (e-Mobility), mass energy storage (ESS), and electric and hybrid vehicles. To date, lithium-ion batteries have grown to focus on increasing energy density and reducing production costs in line with the required capacity. However, the research and development level of lithium-ion batteries seems to have reached the limit in terms of energy density. In addition, the charging time is an important factor for using lithium-ion batteries. Therefore, it was urgent to develop a high-speed charger to shorten the charging time. In this thesis, a discharger was fabricated to evaluate the capacity and characteristics of Li-ion battery pack which can be used for e-mobility. To achieve this, a smart discharger is designed with a combination of active load, current sensor, and temperature sensor. To carry out this thesis, an active load switching using sensor control circuit, signal processing circuit, and FET was designed and manufactured as hardware with the characteristics of active discharger. And as software for controlling the hardware of the active discharger, a Raspberry Pi control device and a touch screen program were designed. The developed discharger is designed to change the 600W capacity battery in the form of active load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.857-866
• /
• 2020

'Movement' is an expanded concept of 'place' where people act, interact with one another and achieve a specific purpose at every moment. Wheelchairs, as a mobility aid, have a profound impact on improving the quality of physical and psychological well-being for the mobility disadvantaged groups who have mobility difficulties. Such mobility aids were developed mainly for outdoor activities, but in recent years, mobility aids for indoor spaces, the main living environment, are also being developed. Because indoor mobility aids generally move short distances repeatedly, this study examined the characteristics of lithium-ion batteries in short-distance driving of battery-powered wheelchairs and compared them with the characteristics of lithium-ion batteries in continuous driving. The result showed that the driving time for short-distance driving was 2.8% shorter than that of continuous driving. The current supplied to the motor was 15.4% higher for short-distance driving than that of continuous driving.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.1-8
• /
• 2005

The increased effective impurity due to the pocket ion implantation is well blown to give rise to a reduction of the effective mobility of halo MOSFETs. However, further decrease of the effective mobility can be observed in pocket implanted MOSFETs above the mobility reduction due to the Coulomb impurity scattering and the gate bias dependency of the effective mobility can also differ from the simple model describing the mobility behavior in terms of the effective impurity. Phonon scattering and surface scattering as well as impurity Coulomb scattering are also shown to be effective in the degradation of the carrier mobility of pocket implanted MOSFETs. Using the 1-D regional approximation the effect of the distribution of the inversion charge density along the channel on the drain current is investigated. The inhomogeneous channel charge distribution due to pocket implantation is also shown to contribute to the further reduction of the effective mobility in halo MOSFETs.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.6
• /
• pp.752-759
• /
• 2007

For an accurate measurement of aerosol particle size distribution using a differential mobility analyser (DMA), a new calculation process, capable of predicting the masses for the various kinds of water cluster ions generated from a bipolar ionizer, was prepared by improving the previous process. The masses for the 5 kinds of positive and negative water cluster ions produced from a SMAC ionizer were predicted by the improved calculation process. The aerosol particle charging ratios calculated by applying the predicted ion masses to particle charging equations were in good accordance with the experimentally measured ones, indicating that the improved calculation process are more reasonable than the previous one in a mass prediction of bipolar water cluster ions.