• 제목/요약/키워드: Ion concentration and type

검색결과 287건 처리시간 0.021초

[ 0.1\;μm ] SOI-MOSFET의 적정 채널도핑농도에 관한 시뮬레이션 연구 (Investigation of Optimal Channel Doping Concentration for 0.1\;μm SOI-MOSFET by Process and Device Simulation)

  • 최광수
    • 한국재료학회지
    • /
    • 제18권5호
    • /
    • pp.272-276
    • /
    • 2008
  • In submicron MOSFET devices, maintaining the ratio between the channel length (L) and the channel depth (D) at 3 : 1 or larger is known to be critical in preventing deleterious short-channel effects. In this study, n-type SOI-MOSFETs with a channel length of $0.1\;{\mu}m$ and a Si film thickness (channel depth) of $0.033\;{\mu}m$ (L : D = 3 : 1) were virtually fabricated using a TSUPREM-4 process simulator. To form functioning transistors on the very thin Si film, a protective layer of $0.08\;{\mu}m$-thick surface oxide was deposited prior to the source/drain ion implantation so as to dampen the speed of the incoming As ions. The p-type boron doping concentration of the Si film, in which the device channel is formed, was used as the key variable in the process simulation. The finished devices were electrically tested with a Medici device simulator. The result showed that, for a given channel doping concentration of $1.9{\sim}2.5\;{\times}\;10^{18}\;cm^{-3}$, the threshold voltage was $0.5{\sim}0.7\;V$, and the subthreshold swing was $70{\sim}80\;mV/dec$. These value ranges are all fairly reasonable and should form a 'magic region' in which SOI-MOSFETs run optimally.

Sorption of Chromium Ions from Aqueous Solution onto Chemically Activated Carbons Developed from Maize Cobs

  • Youssef, A.M.;El-Nabarawy, Th.;Shouman, Mona A.;Khedr, S.A.
    • Carbon letters
    • /
    • 제9권4호
    • /
    • pp.275-282
    • /
    • 2008
  • Chemically activated carbons were prepared from maize cobs, using phosphoric acid of variable concentration. The textural parameters of the activated carbons were determined from the nitrogen adsorption isotherms measured at 77 K. The chemistry of the carbon surface was determined by measuring the surface pH, the pHPZC and the concentration of the carbon - oxygen groups of the acid type on the carbon surface. Kinetics of Cr(VI) sorption/reduction was investigated at 303 K. Two processes were investigated in terms of kinetics and equilibrium namely; Cr(VI) removal and chromium sorption were studied at various initial pH (1-7). Removal of Cr(VI) shows a maximum at pH 2.5. At pH<2.5, sorption decreases because of the proton competition with evolved Cr(III) for ion exchange sites. The decrease of sorption at pH>2.5 is due to proton insufficiency and to the decrease of the extent of Cr(VI) reduction. The chemistry of the surface of activated carbon is an important factor in determining its adsorption capacity from aqueous solutions particularly when the sorption process involves ion exchange.

Byssochlamys fulca가 생성하는 펙틴질 분해효소에 관한 연구 II (Studies on the Pectolytic Enzymes from Byssochlamys fulva II)

  • 남영중;김남수;홍순우
    • 미생물학회지
    • /
    • 제21권2호
    • /
    • pp.86-94
    • /
    • 1983
  • Polygalacturonase of Byssochlamys fulva was purified and characterized. Specific activity increased from 2.21 units/mg protein to 10.47 units/mg protein through $(NH_4)_2SO_4$ treatment, SephadexG-100 gel filtration, and DEAE-Sephadex ion exchange chromatography. Divalent cations, such as $Ca^{++}\;and\;Cu^{++}$, increased polygalacturonase activity greatly. Added as $10^{-3}M$ concentration, $Ca^{++}$ ion enhanced enzyme activity 9.8folds. Optimum temperature was $50^{\circ}C$ and optimum pH was 5.0. Activation energy of reaction was 8.69 Kcal/mole. Michaelis-Menten $constant(K_M)\;and\;V_{max}$ of reaction were $6.27{\times}10^{-3}mole/l\;and\;2.85{$\mu}moles/min$. Polygalacturonase of Byssochlamys fulva preferred polygalacturonic acid to pectin as substrate and was presumed as endo-type on the basis of the relationship between viscosity reduction and substrate degradation. Molecular weight of polygalacturonase was estimated as 55,000.

  • PDF

밀폐식 Ni-Cd 전지의 충전특성에 관한 연구 (Study on the Charging Characteristics of a Sealed Type Ni-Cd Cell)

  • 박영우;김재원;전무식
    • 대한화학회지
    • /
    • 제15권6호
    • /
    • pp.347-352
    • /
    • 1971
  • The variations of the positive and negative electrode potentials, and of internal pressure were measured during the charge of the sealed type Ni-Cd cell. Both polarization characteristics of a paste type Cd-electrode as a gas diffusion electrode in 30% KOH solution and the effects of active carbon electrode as an oxygen consuming auxiliary electrode of the Ni-Cd cell on the charging characteristics of the cell were studied. Peak voltage at the end of charge of the cell is ascribed to the peak at the negative electrode potential, which is due to the concentration polarization by the lack of $Cd^{++}$ ion and oxygen concentration. And the recovery of the negative electrode potential is resulted from depolarization by the increasing diffusion limiting current density with the increasing oxygen pressure. The active carbon electrode was effective as an oxygen consuming auxiliary electrode. The internal pressure of the cell could be maintained below 200mmHg even at one hour rate charge and overcharge by the use of active carbon electrode as an auxiliary electrode.

  • PDF

Purification and characterization of hepatic lipase from Todarodes pacificus

  • Park, Jong-Won;Cho, Soon-Yeong;Choi, Suk-Jung
    • BMB Reports
    • /
    • 제41권3호
    • /
    • pp.254-258
    • /
    • 2008
  • Lipase was purified from squid (Todarodes pacificus) liver in an attempt to investigate the possibility of applying the enzyme for biotechnological applications. Crude extract of squid liver was initially fractionated by the batch type ion exchange chromatography. The fraction containing lipase activity was further purified with an octyl-Sepharose column. Finally, lipase was purified by eluting active protein from a non-dissociating polyacrylamide gel after zymographic analysis. Molecular weight of the purified enzyme was determined to be 27 kDa by SDS-polyacrylamide gel electrophoresis. The enzyme showed the highest activity at a temperature range of $35-40^{\circ}C$ and at pH 8.0. The activity was almost completely inhibited at 1 mM concentration of $Hg^{2+}$ or $Cu^{2+}$ ion. Partial amino acid sequence of the enzyme was also determined.

열분무 LC/MS에 의한 인삼사포닌의 분석 (Analysis of Ginsenosides by Thermospray LC/MS)

  • Park, Man-Ki;Park, Jeong-Hill;Hwang, Gwi-Seo;Lee, Mi-Young;Park, In-Jeong
    • Journal of Ginseng Research
    • /
    • 제19권2호
    • /
    • pp.134-137
    • /
    • 1995
  • Ginseng saponins were analyzed by thermospray (TSP) LCMS method using ODS column and with acetonitrile/ammonium acetate solution. Optimal condition for TSP Lchfs was found as follows: capillary temperature: 33$0^{\circ}C$ repelled voltage: 200 V, and concentration of ammonium acetate: 0. 05 M. Panaxadiol and panaxatriol type saponins showed characteristic fragment ions. The calibration curve of ginseng saponin showed good linearity with a correlation coefficient of 0.99. Detection limits using selected ion monitoring (SIM) technique were improved by 10~200 times compared to conventional HPLCnnr detection method.

  • PDF

맥아당결합 단백질에 융합된 면역결핍 바이러스 인테그라제의 생산 및 분석 (Production and Characterization of Human Immunodeficiency Virus Integrase Fused with a Maltose-Binding Protein)

  • 김도진;오유택;신차균
    • 약학회지
    • /
    • 제42권1호
    • /
    • pp.46-52
    • /
    • 1998
  • Retroviral integrase is required for integration of viral DNA into the host cell chromosome. Human immunodeficiency virus type-1 integrase was partially purified as a part of a fusion protein linked to a maltose-binding protein and characterized in terms of an endonucleolytic activity. The concentration of the fusion protein purified through an amylose column was about 12mg/ml. Indicating that the solubility of the fusion protein is highly increased by the presence of a maltose-binding protein, considering that the integrase protein alone is poorly solubilized. The endonucleolytic activity of the fusion protein was detected at 0.1 to 1.OmM $Mn^{++}$ ion, but not at any concentrations tested of $Mn^{++}$ ion.

  • PDF

금속이온이 치환된 Y형 제올라이트에서 벤젠의 촉매연소반응 (Catalytic Combustion of Benzene over Metal Ion-Substituted Y-Type Zeolites)

  • 홍성수
    • 청정기술
    • /
    • 제22권3호
    • /
    • pp.161-167
    • /
    • 2016
  • 여러 가지 금속이온이 치환된 제올라이트에서 벤젠의 촉매연소 반응에 대해 연구하였다. 사용한 제올라이트 중 Y(4.8)형 제올라이트가 가장 높은 활성을 보여주었고, Y(4.8)형 제올라이트에 치환된 금속 이온 중 구리이온이 가장 높은 활성을 보여주었다. 촉매의 활성은 산소 TPD에 의해 얻어진 흡착산소의 양에 비례하였다. Cu/Y(4.8) 촉매에서 Cu 이온의 농도가 커질수록 반응활성이 증가하였다. 벤젠의 연소반응의 전환율은 반응물 중 벤젠의 농도보다는 산소 농도의 영향을 많이 받았다. 또한, 반응물에 첨가된 물은 촉매 활성을 감소시켰다.

유연탄 비산회로부터 합성한 제올라이트 4A에 의한 중금속 이온의 흡착 (Adsorption of Heavy Metal Ions by Synthesized Zeolite 4A using Bituminous Coal Fly Ash)

  • 김상호;연익준;김광렬
    • 환경위생공학
    • /
    • 제14권3호
    • /
    • pp.63-70
    • /
    • 1999
  • A study on the zeolite synthesized of bituminous coal fly ash from power plant has been carried out to reuse industrial waste. The synthesized zeolite was proved to be 4A type by means of the X-ray diffraction analysis and the degree of crystallinity was found to be higher than 90%. Then the synthesized zeolite was used as an adsorbent to remove the heavy metal ions in the CU, Pb, and Cd containing wastewater and water. Also, adsorption characteristics and kinetics of synthesized zeolite in the each metal ion solutions were studied. In each ion solutions, the adsorbed amounts of Pb, Cd, and Cu to the unit weight of synthesized zeolite were 141.6, 118.8, and 131.4mg/g respectively when each metal ion concentration was 500mg/L solution. The adsorption kinetics was fitted well to the Freundlich isotherms. The value of l/n for Pb, Cd, and Cu and 0.27, 0.50, and 0.66, respectively. Those results showed that the synthesized zeolite could be used as an adsorbent to remove single heavy metal ions in the wastewater and water. The heats of adsorption, H values of Pb, Cd, and Cu were 4.87, 14.95, and 18.23kacl/mol by the Henry-van't Hoff equation.

  • PDF

콘크리트내로 침투하는 염소이온 반응형 부식센서의 응답특성에 미치는 센서 세선 수의 영향에 관한 실험적 연구 (An Experimental Study on the Effect of Sensor Line Number on the Reactivity Characteristic of Corrosion Sensor Reactive with Chloride Ion to Immigrate into Concrete)

  • 이현석;이한승
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제18권3호
    • /
    • pp.143-152
    • /
    • 2014
  • 본 연구에서는 콘크리트내로 침투하는 염소이온을 모니터링하기 위하여, 스크린프리트 기법으로 염소이온 반응형 부식센서를 개발하고, 센서의 세선 수가 부식반응도 및 민감도에 미치는 영향을 실험을 통하여 정량적으로 분석하였다. 개발된 부식센서를 이용하여 염소이온량에 따라 부식 반응도을 확인하였으며, 센서의 파괴정도에 따른 저항변화에서는 단선형 센서보다 다선형 센서에서 큰 저항 변화를 나타내었다. 또한, 부식센서는 NaCl 수용액의 농도가 높은 만큼 센서의 저항변화가 크고, 콘크리트 내에서 센서 종류에 따른 부식저항은 단선형보다 다선형에서 민감도가 높게 나타났으며, 센서의 매설깊이가 클수록 저항변화 사이클 (cycle)은 증가하였다. 이상의 결과로, 본 연구에서 개발된 부식센서는 염분에 대한 부식반응과 민감도, 저항의 변화를 감지할 수 있었으며, 특히 7세선이 우수한 결과를 나타내어, 염분의 침투정도를 모니터링 하는데 가장 적합하다고 판단된다.