• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.68-75
• /
• 2020

Non-orthogonal multiple access (NOMA) has gained the significant attention in the fifth generation (5G) mobile communication, which enables the advanced smart convergence of the artificial intelligence (AI), the internet of things (IoT), and many of the state-of-the-art technologies. Recently, correlated superposition coding (SC) has been proposed in NOMA, to achieve the near-perfect successive interference cancellation (SIC) bit-error rate (BER) performance for the stronger channel users, and to mitigate the severe BER performance degradation for the weaker channel users. In the correlated SC NOMA scheme, the stronger channel user BER performance is even better than the perfect SIC BER performance, for some range of the power allocation factor. However, such excessively good BER performance is not good for the user-fairness, i.e., the more power to the weaker channel user and the less power to the stronger channel user, because the excessively good BER performance of the stronger channel user results in the worse BER performance of the weaker channel user. Therefore, in this paper, we propose the power splitting to establish the user-fairness between both users. First, we derive a closed-form expression for the power splitting factor. Then it is shown that in terms of BER performance, the user-fairness is established between the two users. In result, the power splitting scheme could be considered in correlated SC NOMA for the user-fairness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.554-561
• /
• 2017

IoT (Internet of Things) devices are often located in environments where indoor or underground, signals are difficult to reach. In addition, the transmission power is low, the base station should be designed to be able to receive signals even at low reception sensitivity. For this reason, a device having a poor channel condition can be transmitted at a low data rate using a low coding rate or repetition. When the coverage class is divided according to the channel condition and the data rate, the packet length may vary from one coverage class to another, and the performance of the slotted aloha random access may be degraded. We will focus on two methods of using shared-resource and seperate resources among multiple slotted aloha methods. In particular, when devices with different coverage classes use shared resources, performance of a device with a bad channel condition may deteriorate. Conversely, when using separate resources for each coverage class, there is a problem that congestion may occur which increases the number of devices that perform random access to one resource area. In this paper, we propose some methods to overcome this problem. This study is mainly focused on MTC devices, and is considered to be a high possibility of future development.

• International Journal of Computer Science & Network Security
• /
• v.24 no.4
• /
• pp.163-169
• /
• 2024

India is a developing nation and has come with comprehensive way in modernizing its reducing poverty, economy and rising living standards for an outsized fragment of its residents. The STEM (Science, Technology, Engineering, and Mathematics) education plays an important role in it. STEM is an educational curriculum that emphasis on the subjects of "science, technology, engineering, and mathematics". In traditional education scenario, these subjects are taught independently, but according to the educational philosophy of STEM that teaches these subjects together in project-based lessons. STEM helps the students in his holistic development. Youth unemployment is the biggest concern due to lack of adequate skills. There is a huge skill gap behind jobless engineers and the question arises how we can prepare engineers for a better tomorrow? Now a day's Industry 4.0 is a new fourth industrial revolution which is an intelligent networking of machines and processes for industry through ICT. It is based upon the usage of cyber-physical systems and Internet of Things (IoT). Industrial revolution does not influence only production but also educational system as well. IoT in academics is a new revolution to the Internet technology, which introduced "Smartness" in the entire IT infrastructure. To improve socio-economic status of the India students must equipped with 21st century digital skills and Universities, colleges must provide individual learning kits to their students which can help them in enhancing their productivity and learning outcomes. The major goal of this paper is to present a low cost, effective learning mechanism for STEM implementation using Raspberry Pi 3+ model (Single board computer) and Node Red open source visual programming tool which is developed by IBM for wiring hardware devices together. These tools are broadly used to provide hands on experience on IoT fundamentals during teaching and learning. This paper elaborates the appropriateness and the practicality of these concepts via an example by implementing a user interface (UI) and Dashboard in Node-RED where dashboard palette is used for demonstration with switch, slider, gauge and Raspberry pi palette is used to connect with GPIO pins present on Raspberry pi board. An LED light is connected with a GPIO pin as an output pin. In this experiment, it is shown that the Node-Red dashboard is accessing on Raspberry pi and via Smartphone as well. In the final step results are shown in an elaborate manner. Conversely, inadequate Programming skills in students are the biggest challenge because without good programming skills there would be no pioneers in engineering, robotics and other areas. Coding plays an important role to increase the level of knowledge on a wide scale and to encourage the interest of students in coding. Today Python language which is Open source and most demanding languages in the industry in order to know data science and algorithms, understanding computer science would not be possible without science, technology, engineering and math. In this paper a small experiment is also done with an LED light via writing source code in python. These tiny experiments are really helpful to encourage the students and give play way to learn these advance technologies. The cost estimation is presented in tabular form for per learning kit provided to the students for Hands on experiments. Some Popular In addition, some Open source tools for experimenting with IoT Technology are described. Students can enrich their knowledge by doing lots of experiments with these freely available software's and this low cost hardware in labs or learning kits provided to them.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.56-64
• /
• 2017

In this paper, an advanced ZigBee (AZB) system for internet-of-things (IoT) applications is proposed which can support various data rates from 31.25 Kbps to 2 Mbps, and the implementation results of the AZB baseband processor are presented. Repetition coding for 32-chip direct-sequence spread spectrum (DSSS) symbol is applied for low rates under 250 Kbps to extend the coverage. Convolution coding, puncturing, and interleaving for non-DSSS symbol are performed for high rates from 500 Kbps to 2 Mbps for multi-media services. Simulation results show that the coverage increases at the rate of 51.8-77.3% for various environments compared with IEEE 802.15.4 ZigBee. AZB baseband processor was implemented in 180 nm CMOS process and total gate counts are 260K with the size of $5.8mm^2$.

• International journal of advanced smart convergence
• /
• v.10 no.3
• /
• pp.1-9
• /
• 2021

In the Internet of Thing (IoT) framework, massive machine-type communications (MMTC) have required large spectral efficiency. For this, non-orthogonal multiple access (NOMA) has emerged as an efficient solution. Recently, a non-successive interference cancellation (SIC) NOMA scheme has been implemented without loss. This lossless NOMA without SIC is achieved via correlated superposition coding (SC), in contrast to conventional independent SC. However, conventional minimum high-correlated SC for only 2-user NOMA schemes was investigated in the lossless 2-user non-SIC NOMA implementation. Thus, this paper investigates a 3-user low-correlated SC scheme, especially for an inflated achievable sum rate, with a design of 3-user low-correlated SC. First, we design the 3-user low-correlated SC scheme by taking the minimum sum rate between 3-user SIC NOMA and 3-user non-SIC NOMA, both with correlated SC. Then, simulations demonstrate that the low correlation in the direction of the first user's power allocation inflates the sum rate in the same direction, compared to that of conventional minimum high-correlated SC NOMA, and such inflation due to low correlation is also observed similarly, in the direction of the second user's power allocation. Moreover, we also show that the two low correlations of the first and second users inflates doubly in the both directions of the first and second users' power allocations. As a result, the proposed 3-user low-correlated SC could be considered as a promising scheme, with the inflated sum rate in the future fifth-generation (5G) NOMA networks.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.180-182
• /
• 2020

최근 IoT 기술이 대중화됨에 따라 커넥티드 카, 스마트 시티와 같은 machine-to-machine 기술의 활용 분야가 다양화되고 있다. 이에 따라, 기계 지향 비디오 처리 및 부호화 기술에 대한 연구분야에 산업계와 학계의 관심 역시 집중되고 있다. 국제 표준화 단체인 MPEG은 이러한 추세를 반영하여 기존 비디오 부호화 표준을 개선할 새로운 표준을 수립하기 위해 Video Coding for Machines (VCM) 그룹을 구성하여 기계 소비를 대상으로 하는 비디오 표준의 표준화를 진행하고 있다. 이에 본 논문에서는 VCM이 기계 소비를 대상으로 진행하고 있는 특징맵 부호화의 부호화 효율을 개선하기 위해 특징맵을 시간적, 공간적으로 재정렬하는 방법을 제안한다. 실험 결과, 제안 방법이 CityScapes의 검증 세트 내 일부 이미지에 대해 시간적 재정렬을 수행한 결과 random access 조건에서 최대 1.48%의 부호화 효율이 향상됨이 확인되었다.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.49-58
• /
• 2020

Non-orthogonal multiple access (NOMA) has been recognized as a significant technology in the fifth generation (5G) and beyond mobile communication, which encompasses the advanced smart convergence of the artificial intelligence (AI) and the internet of things (IoT). In NOMA, since the channel resources are shared by many users, it is essential to establish the user fairness. Such fairness is achieved by the power allocation among the users, and in turn, the less power is allocated to the stronger channel users. Especially, the first and second strong channel users have to share the extremely small amount of power. In this paper, we consider the power optimization for the two users with the small power. First, the closed-form expression for the power allocation is derived and then the results are validated by the numerical results. Furthermore, with the derived analytical expression, for the various channel environments, the optimal power allocation is investigated and the impact of the channel gain difference on the power allocation is analyzed.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.1-9
• /
• 2021

In the Internet-of-Things (IoT) and artificial intelligence (AI), complete implementations are dependent largely on the speed of the fifth generation (5G) networks. However, successive interference cancellation (SIC) in non-orthogonal multiple access (NOMA) of the 5G mobile networks can be still decoding latency and receiver complexity in the conventional SIC NOMA scheme. Thus, in order to reduce latency and complexity of inherent SIC in conventional SIC NOMA schemes, we propose a rate-lossless non-SIC NOMA scheme. First, we derive the closed-form expression for the achievable data rate of the asymmetric 2PAM non-SIC NOMA, i.e., without SIC. Second, the exact achievable power allocation interval of this rate-lossless non-SIC NOMA scheme is also derived. Then it is shown that over the derived achievable power allocation interval of user-fairness, rate-lossless non-SIC NOMA can be implemented. As a result, the asymmetric 2PAM could be a promising modulation scheme for rate-lossless non-SIC NOMA of 5G networks, under user-fairness.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1203-1206
• /
• 2022

자율주행, IoT 등 많은 양의 영상 정보를 실시간으로 처리해야 하는 기술과 mobile device 등의 기기에서 Machine Learning 연산을 하는 소프트웨어들이 등장함에 따라 사람을 위한 영상을 출력하는 영상 부호화 기술 대신 기계의 vision task 성능을 위해 특화된 영상 부호화 기술의 필요성이 대두됐다. 본 연구에서는 영상에서 추출한 특징맵을 Neural-Net based Video Coding 모델을 이용해 압축률과 기계의 vision task 성능을 동시에 최적화한다. 또한, 하드웨어 친화적인 block-based 처리와 이로 인한 성능 저하를 최소화하기 위해 적응적 resizing 방식을 제안한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.280-282
• /
• 2020

최근 사물인터넷(IoT), 자율주행과 같이 기계 간의 통신이 요구되는 서비스가 늘어감에 따라, 기계 임무 수행에 최적화된 데이터의 생성 및 압축에 대한 필요성이 증가하고 있다. 또한, 사물인터넷과 인공지능(AI)이 접목된 기술이 주목을 받으면서 딥러닝 모델에서 추출되는 특징(feature)을 디바이스에서 클라우드로 전송하는 방안에 관한 연구가 진행되고 있으며, 국제 표준화 기구인 MPEG에서는 '기계를 위한 부호화(Video Coding for Machine: VCM)'에 대한 표준 기술 개발을 진행 중이다. 딥러닝으로 특징을 추출하는 가장 대표적인 방법으로는 합성곱 신경망(Convolutional Neural Network: CNN)이 있으며, 오토인코더는 입력층과 출력층의 구조를 동일하게 하여 출력을 가능한 한 입력에 근사시키고 은닉층을 입력층보다 작게 구성하여 차원을 축소함으로써 데이터를 압축하는 딥러닝 기반 이미지 압축 방식이다. 이에 본 논문에서는 이러한 오토인코더의 성질을 이용하여 CNN 기반의 이미지 분류 네트워크의 합성곱 신경망으로부터 추출된 feature에 오토인코더를 적용하여 압축하는 방안을 제안한다.