• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.1-6
• /
• 2007

In this study, we have performed the channel modification of the conventional MHEMT (metamorphic high electron mobility transistor) to improve the breakdown characteristics. The Modified channel consists of the InxGal-xAs channel and the InP sub channel instead of the InxGa1-xAs channel. Since InP has the lower impact ionization coefficient in comparison with In0.53Ga0.47As, we have adopted the InP-composite channel in the modified MHEMT. We have investigated the breakdown mechanism and the RF characteristics for the conventional and the InP- composite channel MHEMTs. From the measurement results, we have obtained the enhanced on and off-state breakdown voltages of 2.4 and 5.7 V, respectively. Also, the increased RF characteristics have brought about the decreased output conductance for the InP-composite channel MHEMT. The cut-off frequency (fT) and the maximum oscillation frequency (fmax) for the InP-composite Channel MHEMT were 160 GHz and 230 GHz, respectively. It has been shown that the InP-composite channel MHEMT has the potential applications for the millimeter wave power device.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.376-376
• /
• 2011

I-III-VI2 chalcopyrite compounds, particularly copper, indium, gallium selenide(Cu(InxGa1-x)Se2, CIGS), are effective light-absorbing materials in thin-film solar application. They are direct band-gap semiconductors with correspondingly high optical absorption coefficients. Also they are stable under long-term excitation. CIS (CIGS) solar cell reached conversion efficiencies as high as 19.5%. Several methods to prepare CIS (CIGS) absorber films have been reported, such as co-evaporation, sputtering, selenization, and electrodeposition. Until now, co-evaporation is the most successful technique for the preparation of CIS (CIGS) in terms of solar efficiency, but it seems difficult to scale up. CIS solar cells have been hindered by high costs associated with a fabrication process. Therefore, inorganic colloidal ink suitable for a scalable coating process could be a key step in the development of low-cost solar cells. Here, we will present the preparation of CIS photo absorption layer by a solution process using novel metal precursors. Chalcopyrite copper indium diselenide (CuInSe2) nanocrystals ranging from 5 to 20nm in diameter were synthesized by arrested precipitation in solution. For the fabrication of CIS photo absorption layer, the CuInSe2 colloidal ink was prepared by dispersing in organic solvent and used to drop-casting on molybdenum substrate. We have characterized the nanoparticless and CIS layer by XRD, SEM, TEM, and ICP.

• BMB Reports
• /
• v.41 no.11
• /
• pp.796-802
• /
• 2008

Suppression subtractive hybridization (SSH) cDNA libraries of the giant tiger shrimp, Penaeus monodon, were constructed. In total, 178 and 187 clones from the forward and reverse SSH libraries, respectively, of P. monodon were unidirectionally sequenced. From these, 37.1% and 53.5% Expressed Sequence Tags (ESTs) significantly matched known genes (E-value < 1e-04). Three isoforms of P. monodon progestin membrane receptor component 1: PM-PGMRC1-s (1980 bp), PM-PGMRC1- m (2848 bp), and PM-PGMRC1-l (2971 bp), with an identical ORF of 573 bp corresponding to a deduced polypeptide of 190 amino acids, were successfully identified by RACE-PCR. Interestingly, PMPGMRC1 showed a greater expression level in testes of juvenile than broodstock P. monodon (P < 0.05). Dopamine administration ($10^{-6}$ mol/shrimp) resulted in up-regulation of PM-PGMRC1 in testes of juveniles at 3 hrs post treatment (P < 0.05), but had no effect on PM-Dmc1 (P > 0.05).

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.334-340
• /
• 1998

Photoreflectance (PR) measurents have been performed on $In_xGa_{1-x}As/GaAs$ grown by molecular beam epitaxy (MBE). Bandgap $(E_0)$ of $In_xGa_{1-x}As$ epilayer measured from PR was separated as heavy-hole $(E_0(HH))$ and light-hole $(E_0(LH))$ by strain effect. The compositions and the strains of epilayer were obtained from the energy value of $E_0(HH)$ and from energy difference of $E_0(HH)$ and $E_0(LH)$, respectively. In addition, the PR signal of $E_0(LH)$ was diminished below 160 K. The interface electric field (E) of InGaAs/GaAs was increased from $0.75{\times}10^5$ V/cm to $2.66{\times}10^5$ V/cm as In composition increased, which was calculated from Franz-Keldysh oscillation (FKO) peaks. As the temperature dependence of the PR signal at x=0.09 sample, we obtained Varshni and Bose-Einstein coefficients.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.345-355
• /
• 2011

GaAs-based metamorphic high electron mobility transistors (MHEMTs) and InP-based high electron mobility transistors (HEMTs) have good microwave and millimeter-wave frequency performance with lower minimum noise figure. MHEMTs have some advantages, especially for cost, compared with InP-based ones. In this paper, InAlAs/InxGa1-xAs/GaAs MHEMTs are simulated for DC/RF small-signal analysis. The hydrodynamic simulation parameters are calibrated to a fabricated 0.1-${\mu}m$ ${\Gamma}$-gate MHEMT device having the modulation-doped $In_{0.52}Al_{0.48}As/In_{0.53}Ga_{0.47}As$ heterostructure on the GaAs substrate, and the simulations for RF small-signal characteristics are performed, compared with the measured data, and analyzed for the devices. In addition, the simulations for the DC/RF characteristics of the MHEMTs with different gate-recess structures are performed, compared and analyzed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.3
• /
• pp.113-116
• /
• 2010

We report on the growth and characteristics of the structural and optical properties of InGaN nano-structures doped with antimony (Sb) as a catalyst. The use of catalyst has been explored to modify the growth and defect generation during strained layer heteroepitaxial growth. We performed the growth of the InGaN nano-structures on c-sapphire substrates using mixed-source hydride vapor phase epitaxy (HVPE). The characteristic of samples was measured by scanning electron microscope (SEM) and photoluminescence (PL). The aligning direction of c-axis of the InGaN nano-structures was changed from vertical to parallel or inclined to the surface of substrates when the Sb was added as a catalyst. The indium composition was estimated about 3.2% in both cases of with or without the addition of Sb in the InxGal-xN structures. From the results of InGaN nano-structures formed with the addition of Sb, we can expect the performance of optical devices would be more improved by reduced piezo-electric field if we use the InGaN nano-structures of which c-axes are aligned parallel to the substrates as an active layer.