• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.502-511
• /
• 2017

Design, manufacture and operate the 700W Solid oxide fuel cell system suitable for housing. Except for BOP not produced domestically, most of the domestic BOPs were applied as much as possible. Finally, the system size was 350 liter. System performance was electric efficiency 44.64%, thermal efficiency 40.99%, total efficiency 85.62% at certificate authority. The system was operated for 4,500 hours, this operation time include automatically system on/off, E-stop for emergency stop, load trip for blackout and inverter error. There were that the system on/off were 26 times. System performance remains intact after system on/off.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.29-34
• /
• 2015

DC bus electrolytic capacitors are used in variety of equipments as smoothing element of the power converters because it has high capacitance for its size and low price. It is responsible for frequent breakdowns of many static converters and inverter drive systems. Therefore it is important to diagnosis monitoring the condition of an electrolytic capacitor in real-time to predict the failure of power converter. In this paper, the on-line remote diagnosis monitoring system for DC BUS electrolytic capacitors of power converter using low-cost type Zigbee communication modules is developed. To estimate the health status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The capacitor ESR is estimated by using RMS computation using AC coupling method of DC link ripple voltage/current. The Zigbee communication-based experimental results show that the proposed remote DC capacitor diagnosis monitoring system can be applied to DC/DC converter and UPS successfully.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1848-1856
• /
• 2012

This paper proposes a new grid-tied power conditioning system for battery energy storage, which is composed of a 2-stage DC-DC converter and a PWM inverter. The 2-stage DC-DC converter is composed of an LLC resonant converter connected in cascade with a 2-quadrant hybrid-switching chopper. The LLC resonant converter operates in constant duty ratio, while the 2-quadrant hybrid-switching chopper operates in variable duty ratio for voltage regulation. The operation of proposed system was verified through theoretical analysis and computer simulations. Based on computer simulations, a hardware prototype was built and tested to confirm the technical feasibility of proposed system. The proposed system could have relatively higher efficiency and smaller size than the existing system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.301-304
• /
• 2001

Wind power generation system is one of the most useful energy resource using natural environment. One of the biggest problem we encountered is toot the wind speed is fluctuating sharply according to the weather conditions rather than it is stable. In this paper we do the equivalent modeling the mechanical energy of wind power turbine according to wind speed into the synchronous generator. We analyse the equivalent modeling output part of rectifier into DC/DC converter input part theoretically. We analyse a battery charging characteristics for power storage enabling the supply of stable power to the load. We design a system and do the modeling of it analytically so that it supplies a stable power to the load by constructing a DC-AC inverter point. Also we make a small size model usable in actual wind power generation system of 30kw and make an experiment and confirm its validity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.176-179
• /
• 2002

Nowadays, CO2 lasers are used widely in many applications such as materials fabrication. communications, remote sensing and military purpose etc. It is important to control the laser output power in those fields. In this paper, current resonant half-bridge inverter and Cockcraft-Walton circuit are used to vary the laser output power. This laser power supply is designed and fabricated which has less switching losses and compact size. Also we used an IGBT(insulated Gate Bipolar Transistor) as a switching device of a power supply and PIC one-chip microprocessor are used to control the gate signal of the IGBT precisely. We investigated the output characteristics of this CO2 laser. As a result. the maximum laser output power of 26 [W] is obtained at the resonant frequency of about 13 [kHz].

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.385-388
• /
• 2001

In this paper, the gearless traction machine drive system using a permanent-maget motor for high-speed elevators is addressed. This application of permanent-magnet motor to the elevator traction machine enables several improvements including higher efficiency, better ride comfort, smaller size and weight, and so on. PWM boost converter is also adopted so that DC-link voltage regulation, hi-directional power flow, and controllable power factor with reduced input current harmonics are possible. To increase reliability and performance, the control board, which can include the car and group controller as well as PWM converter and inverter controller, is designed based on TMS320VC33 DSP The simulator system for high-speed elevators has been developed so that the drive system of high-speed elevator can be tested without my limitation on ride distance and the load condition. Some experimental results are given to verify the effectiveness of the developed system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1339-1342
• /
• 2005

This paper presents a simple AC-DC power conditioner for a squirell-cage induction generator(IG) operating under variable shaft speeds. The necessary reactive power for the IG system is supplied by means of a capacitor bank and a voltage-source PWM converter. Using a capacitor bank to transfer the reactive power to the IG under the rated speed and no-load conditions starts the IG operation and reduces the PWM power converter size. A simple control compensating for changes in the electrical loads as well as the variation in speed was developed to regulate the voltages of the IG system by controlling the rotor flux through its reactive and active currents control implementation. This proposed power conditioning scheme can be used efficiently as a wind power generation system where the output voltage of the IG is maintained constant voltage despite the variable frequency and the DC bus voltage of the PWM converter can be used for either DC applications such as battery charging or AC power applications with 60/50 Hz by connecting a stand alone inverter. The experimental and simulated operating performance results of a 5 kW IG scheme at various speeds and leads are presented.

• 한국전자파학회논문지
• /
• 제18권10호
• /
• pp.1107-1116
• /
• 2007

본 논문은 Z-변환 기술을 이용한 2차 고조파를 억제시킨 광대역 개방형 스터브 대역 통과 여파기를 설계 및 제작하고 그 특성을 측정하였다. 제안된 여파기는 주파수 선택적 결합 구조(FSCS)와 ${\lambda}_g/4$ 개방형 스터브를 조합한 구조의 대역 저지 여파기를 광대역 개방형 스터브 대역 통과 여파기에 집적화하여 제2 고조파를 억제하였고, 기존의 개방형 스터브 여파기의 입력단과 출력단에 대역 저지 여파기(BSF)를 삽입할 경우 크기가 증가되었으나, 제안된 구조는 스터브를 연결하는 인버터 위치를 스터브들 사이에 집적화 하여 $18.7{\times}16.9mm^2$의 크기로 제작되어 BSF 삽입 이전보다 크기가 작아졌다. 제안된 여파기는 중심 주파수 5.8 GHz에서 대역폭이 95 %, 삽입 손실 0.6 dB, 반사 손실 14 dB의 측정 결과를 얻었으며, 시뮬레이션 결과와 측정 결과가 유사하게 나타났다. 따라서 위성 통신의 X-밴드 및 지능형 교통 정보 시스템(ITS)의 여파기에 적용할 수 있다.

• 대한전자공학회논문지SD
• /
• 제47권5호
• /
• pp.87-93
• /
• 2010

본 논문에서는 디지털 위상동기루프에서 사용하는 고해상도와 넓은 입력 범위를 가지는 2 단계 시간-디지털 변환기(TDC)구조를 제안한다. 디지털 위상동기루프에서 디지털 오실레이터의 출력 주파수와 기준 주파수와의 위상 차이를 비교하는데 사용하는 TDC는 고해상도로 구현되어야 위상고정루프의 잡음 특성을 좋게 한다. 기존의 TDC의 구조는 인버터로 구성된 지연 라인으로 이루어져 있어 그 해상도는 지연 라인을 구성하는 인버터의 지연 시간에 의해 결정되며, 이는 트랜지스터의 크기에 의해 결정된다. 따라서 특정 공정상에서 TDC의 해상도는 어느 값 이상으로 높일 수 없는 문제점이 있다. 본 논문에서는 인버터보다 작은 값의 지연 시간을 구현하기 위해 위상-인터폴레이션 기법을 사용하였으며, 시간 증폭기를 사용하여 작은 지연 시간을 큰 값으로 증폭하여 다시 TDC에 입력하는 2 단계로 구성하여 고해상도의 TDC를 설계하였다. 시간 증폭기의 이득에 영향을 주는 두 입력의 시간 차이를 작은 값으로 구현하기 위해 지연 시간이 다른 두 인버터의 차이를 이용하여 매우 작은 값의 시간 차이를 구현하여 시간증폭기의 성능을 높였다. 제안하는 TDC는 $0.13{\mu}m$ CMOS 공정으로 설계 되었으며 전체 면적은 $800{\mu}m{\times}850{\mu}m$이다. 1.2 V의 공급전압에서 12 mA의 전류를 사용하며 0.357 ps의 해상도와 200 ps의 입력 범위를 가진다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.279-282
• /
• 2003

In this paper, to apply piezoelectric transformer for PDA backlight inverter, piezoelectric transformer using the composition which $Nb_2O_5$ added into PNW-PMN-PZT ceramics was fabricated as Rosen-type one with the size of $1165mm^3$. And their electrical characteristics were investigated with the variations of load resistance and driving frequency And then, the driving circuit for PDA CCFL(0.6W) which composed of the two MOSFETs connecting in series was manufactured using piezoelectric transformer, VCO and one-chip microprocessor. After driving for 25 min using the proposed circuit for PDA CCFL(0.6W), driving frequency of 214.4kHz, input voltage of 31.78 V and input current of 21.1mA were shown. And then, output voltage of 293.2 V and output current of 2.2mA were shown. At the same time, efficiency of 96.2$\%$ and temperature rise of $3.6^{\circ}C$ were appeared at the piezoelectric transformer.