• 전기학회논문지
• /
• 제65권5호
• /
• pp.804-810
• /
• 2016

Photovoltaic system construction of the module capacity in domestic is specified criteria to less than 105% of the inverter capacity. However, the modules are installed in the outdoor actual output is reduced due to factors such as the irradiation intensity, module surface temperature. Thus, it needs the capacity of the inverter to be designed according to the actual module output. In this paper, the first approach to find the actual module output is to analyze the actual PV system monitoring data. Next, four sites where the loss analysis, system utilization, inverter utilization, and the ratio of the inverter overload are performed using PVSYST software. By changing the ratio of the module capacity, the inverter capacity of the site B is confirmed 20% less than the module capacity. Site A, C, D are identified as the ratio of the inverter capacity is 10% less than the module capacity.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.518-522
• /
• 2001

In recent years, natural energy has attracted growing interest because of environmental concerns. Many studies have been focused on photovoltaic power generation systems because of the ease of use in urban areas. On the conventional system, many photovoltaic modules (PV modules) are connected in series in order to obtain the sufficient DC-bus voltage for generating AC output voltage at the inverter circuit. However, the total generation power on the PV modules sometimes decreases remarkably because of the shadows that partially cover the PV modules. In order to overcome this drawback, an AC module strategy is proposed. On this system, a small power DC-AC utility interactive inverter is mounted on each PV module individually and the inverter operates so as to generate the maximum power from the corresponding PV module. This paper presents a novel flyback-type utility interactive inverter circuit suitable for AC module systems. The feature of the proposed system are, (1) small in volume and light in weight, (2) stable AC current injection, (3) enabling a small DC capacitor. The effectiveness of the proposed system is clarified through the simulation and the experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.117-118
• /
• 2014

This paper presents a new smart power module for 100[kVA] inverter. In the inverter, the three smart modules are used and those are installed at the each pole of the inverter. Each module receives the switching functions from the inverter main controller, and generates duty ratio for IGBTs' switching of the pole. For the reliable operation of the inverter, CAN communication is used for transferring the switching functions form the main controller to the modules. Experiments verify the performance of the smart power module installed in 100[KVA] inverter.

• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.391-398
• /
• 2014

This paper presents a resonant step-down DC/DC converter to reduce the voltage stresses of a 3-phase inverter module under the three-phase AC utility line condition. Under this condition, a conventional 3-phase inverter module suffers from high voltage stresses as a result of the high rectified DC link voltage; hence, a high-cost high-voltage-rating inverter module must be used. However, using the proposed converter, a low-cost low-voltage-rating inverter module may be adopted to drive the motor even under the 3-phase AC line condition. The proposed converter, which can be realized with small size inductor and low-voltage-rating semiconductor devices, operates at a high-efficiency mode because of the zero-current switching operations of all the semiconductor devices. The operational principles are explained and a design example is provided in the study. Experimental results demonstrate the validity of the proposed converter.

• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.124-129
• /
• 2009

최근 자동차 및 자동화 등 많은 첨단 산업분야에서 산업용 모터 정밀 제어를 위한 인버터의 요구가 증가하고 있다. 본 논문에서는 FPGA를 이용하여 단일 제어 유닛으로 여러 개의 모터를 제어할 수 있는 SVPWM 모듈을 설계 제작하여 모터 정밀제어에 응용하고자 한다. 개발된 WVPWM 모듈에는 PWM 발생기뿐만 아니라 위치 및 전류센서 처리 부분과 데프타임 보상기 알고리즘도 함께 구현되었다. 개발 툴은 ALTERA Quartus 8.0을 사용하였으며 시뮬레이션에 의해 동작 특성을 검증하였고 실험을 통해 성능을 검증하였다.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.325-333
• /
• 2007

A PV system inverter test module using RTDS was developed and performance test of a commercial PV inverter was carried out. The developed module consists of one RTDS hardware rack, RTDS software models representing PV array and simple distribution system, and two power amplifiers that was specifically designed for generating power corresponding to signals from RTDS. Performance test results verified effectiveness and reliability of the test module. It is expected that the developed test module may help PV inverter manufacturers improve ana test their systems in the developing stage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.930-931
• /
• 2008

This study is on the development of a low cost inverter module with Power Factor Correction(PFC) circuit which satisfies the international harmonic current standard such as IEC61000-3-2. In this study, the performances of the PFC circuit applying a new control method are simulated and verified by Matlab/Simulink. Also, the inverter module with the designed PFC circuit is implemented and the experimental results for the module are presented. Finally, through an analysis for the results of the simulation and the experiment, the merits obtainable by applying the PFC circuit when designing an inverter module are discussed and presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.987-993
• /
• 2003

The module UPS can flexibly implement expansion of power system capacities. Furthermore, it can be used to build up the parallel redundant system to improve the reliability of power system operation. To realize the module UPS, load sharing without interconnection among parallel connecting modules as well as a small scale and lightweight topology is necessary. In this paper, the three-arm converter/inverter is compared with the general full-bridge and half-bridge topology from a practical point of view and chosen as the module UPS topology. The switching control approaches based on a pulse width modulation of the converter and inverter of the system are presented independently The frequency and voltage droop method is applied to parallel operation control to achieve load sharing. Two prototype 3kVA modules are designed and implemented to confirm the effectiveness of the proposed approaches. Experimental results show that the three-arm UPS system has a high power factor, a low distortion of output voltage and input current, and good load sharing characteristic.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.596-597
• /
• 2017

For General Purpose Inverter dedicated in Motor drive, this market is blood market due to low market price. So, developing engineer must consider the cost reduction plan and do action. This inverter always needs to measure current and shunt solution can be one of cost reduction solution.

• 마이크로전자및패키징학회지
• /
• 제16권1호
• /
• pp.39-43
• /
• 2009

CCFL 구동용 인버터 모듈 개발을 위해, 내부전극 층수에 따른 Rosen-type 적층형 압전변압기를 제작하였으며, 내부전극 층수에 따른 출력 및 효율을 분석하였다. 압전변압기용 원료로는 PZT계 상용원료를 사용하였으며 구동회로는 Half-bridge 방식을 적용하여 압전인버터 모듈을 제작하였다 제작된 압전인버터 모듈의 입력전압은 12.5 V이고 스위칭 주파수는 104.3 KHz로서 압전인버터 구동시 약 100배의 승압비를 얻었으며, 효율은 87%이다.