• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.206-210
• /
• 1999

Since the introduction of IGBT PWM inverters, many low-voltage induction motors have been driven by them. Recently, the stator winding insulation failures have attracted much concern due to high dv/dt of IGBT inverter output. In this paper, presented are the detailed insulation test results of 26 low-voltage induction motors. Six different types of insulation techniques are applied to 26 motors. The tests include PD, $tan{\delta}$, and DIV tests. Also, break-down tests by high voltage pulses are performed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.2
• /
• pp.80-87
• /
• 1987

This paper describes a new approach to control the two-phase servomotor driven with microprocessor based inverter. Conventional 6-step driving system has some shortcomings such as vibration and loss caused by the harmonic voltage. An attempt has been made to eliminate the harmonic content of output waveform by PWM technique and to simplify the control system by phase control method. In realizing the phase control by PWM technique proposed by this paper, control circuit and algorithm has been suggested. The proposed method has been applied to the speed control system with PI controller to confirm the adaptation of the servo system and experimental results has been compared with the computer simulation.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.19-21
• /
• 1996

In this paper, the experiment on the dynamic characteristics of LIM for the propulsion system UTM(Urban Transit Maglev) is threated. Untill now LIM has been mainly experimented by using the rotational arch type system, but this system compose of the test vehicle mounted LIM, which driven by PWM inverter. And the anlysis of the performance and the steady-state characteristics of the LIM is treated under various operation patterns. This paper may be available to compose the operating system of LIM driven by the open or closed loop control.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.216-224
• /
• 2013

This paper describes dual inverter drive for a fractional-slot concentrated winding permanent magnet synchronous machine (PMSM). PMSMs are widely used in many applications from small servo motors to few megawatts generators thanks to its high efficiency and torque density. Especially, fractional-slot concentrated winding PMSM is very popular in the applications where wide operation range is required because it shows very wide constant power speed ratios. High speed operation, however, requires lots of negative daxis current for reducing back-EMF regardless of output torque. Field weakening current does not contribute to the torque generation in surface mounted PMSM case and causes inverter and copper loss. To reduce the losses from field weakening current, this paper proposes PMSM with split stator and parallel dual inverter drive. Proposed parallel dual inverter drive reduces back-EMF and enables efficient drive at high speed and light load situation. Control strategy of proposed dual inverter system is established through loss analysis and simulation. Proposed concept is verified with practical experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.3
• /
• pp.70-79
• /
• 1993

The application of A.C. motor to servo system is rapidly increased according to the recent advance of power electronics and digital control techniques. The induction motor which has a simple structure and needs less maintenance is used in the industrial field for the variable speed and position control recently. In this paper, the current characteristic of the full-bridge resonant inverter is studied by comparing with the computer simulation and the laboratory experiment when the ratio of forced frequency to the natural frequency and the ratio of conduction time to the period at the given frequency is changed. And then, the full-bridge resonant inverter is applied to the speed control of single phase induction motor.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2376-2384
• /
• 2018

To reduce the size and cost of motor driving systems, several methods for driving multiple parallel-connected motors with a single inverter have been proposed. However, dual PMSMs driven by a single inverter, unlike induction motors, have a problem with instability due to system resonance caused by disturbances such as load imbalance and tolerances between two motors. To drive dual SPMSMs fed by a single inverter, this paper proposes an active damping algorithm to effectively suppress resonance by using one-sided sensorless speed control and position difference estimation. By deriving rotor position difference from d-q current differences between two motors, the proposed method is affected less by position difference estimation errors and is simpler than dual sensorless position estimation.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.816-818
• /
• 2001

This paper shows the characteristic analysis for an inverter fed induction motor by the 2-D F.E.A. in variation of the air gap length. Harmonic effects of the induction rioter with different air gap length driven by the 6 step voltage of inverter ate investigated. And the results of the characteristic analysis on the inverter fed induction motor are compared with those of sinusoidal voltage fed motor.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.5
• /
• pp.99-111
• /
• 1993

In this paper, the current waveform and dynamic characteristics of the proposed system which is composed of a full bridge inverter and low pass LC filter is investigated through the results of computer simulation and experiment to find out the good performance of variable speed AC motor. By the experiment results, it is confirmed that the load current of pseudo sine waves is to be got by the proposed low pass LC filter and the speed of single phase AC motor driven by a full bridge inverter can be smoothly controlled by use of digital PID controller.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.547-553
• /
• 1998

In this paper, we composed of utility interactive pv generation system of voltage source inverter, and represented uninterrutible power supply (UPS) equipment maintaining constant voltage, using a pulse width modulation(PWM) voltage fed inverter, as power source disconnection, voltage variation and output current variation with load variation. This system is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to dc side with solar cell using a photovoltaic (PV) that it was so called constant voltage charge. In addition, better output waveform was generated because of PWM method, and it was proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.458-465
• /
• 1998

This paper presents an inverter-driven induction motor used as the traction motor for a high speed drive system that is required safety, reliability and performance and so on, In the respect of traction motor design, it is mainly showed the weight reduction inclination and characteristic investigation due to V/f driving pattern variation of inverter. Particularly, the reduction of V/f ratio pattern effects on the weight of traction motor and badly on the increase of phase current of traction motor in starting point. This method of weight reduction design have to be reached the decision with not only motor but also the consideration of inverter system because of the heat capacity, weight and material cost of inverter according to the increase of current.