• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.267-267
• /
• 2012

$TiO_2$-Ni inverse catalysts were prepared using atomic layer deposition (ALD) process and catalytic $CO_2$ reforming of methane (CRM) reaction over catalysts (either bare Ni or $TiO_2$ coated-Ni particles) were performed using a continuous flow reactor at $800^{\circ}C$. $TiO_2$-Ni inverse catalyst showed higher catalytic reactivity at initial stage of CRM reactions at $800^{\circ}C$ comparing to bare Ni catalysts. Moreover, catalytic activity of $TiO_2$/Ni catalyst was kept high during 13 hrs of the CRM reactions at $800^{\circ}C$, whereas deactivation of bare Ni surface was started within 1hr under same conditions. The results of surface analysis using SEM, XPS, and Raman showed that deposition of graphitic carbon was effectively suppressed in a presence of $TiO_2$ nanoparticles on Ni surface, thereby improving catalytic reactivity and stability of $TiO_2$/Ni catalytic systems. We suggest that utilizing decoration effect of metal catalyst with oxide nanoaprticles is of great potential to develop metal-based catalysts with high stability and reactivity.

• 대한기계학회논문집A
• /
• 제35권10호
• /
• pp.1161-1170
• /
• 2011

이 논문은 촉매 담체에서 열유동 및 구조해석의 실동경계조건에 대한 역문제 해법을 나타낸다. 촉매 담체의 배기가스 정화효율은 열유동 매개변수와 촉매 성분 등에 영향을 받고 열유동 균일도에 의해 평가된다. 역문제의 정식화-열유동 매개변수(입구 온도, 속도, 반응열, 대류열전달계수)를 얻고-와 직접 문제-주어진 출구 온도 분포로부터 평가-를 설명하였다. 실험계획법과 반응표면 최적화 기법은 제안된 역문제 해결을 위해 이용하였다. 촉매 담체의 온도 분포는 예측된 열유동 매개변수에 대한 열유동해석에 의해 얻었다. 열응력과 내구성 평가는 이 온도 분포에 기반해서 수행하였다. 역문제 접근 방법의 유효성과 정확성은 반응표면모델과 측정된 실차 시험과 좋은 일치를 달성함으로써 설명하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4408-4410
• /
• 2011

• 한국연소학회지
• /
• 제8권2호
• /
• pp.27-33
• /
• 2003

Synthesis of carbon nanomaterials on a metal substrate by an ethylene fueled inverse diffusion flame was illustrated. Stainless steel plates were used for the catalytic metal substrate. The effects of catalyst metal particles were investigated through $Fe(NO_3){_3}$ (ferric nitrate, nonahydrate) and $Ni(NO_3){_2}$ (nickel nitrate, hexahydrate). Carbon nanotubes and nanofibers with diameters of $30{\sim}70nm$ were found on the substrate for the case of using SUS304 substrates only and using them with metal nitrates. In case of using metal nitrates, due to the easy activation of the metal particles, the formation and growth of carbon nanomaterials were occurred in the lower temperature region than that of using SUS304 substrates only.

• 한국연소학회지
• /
• 제10권1호
• /
• pp.20-26
• /
• 2005

In the present study, catalytic combustion of hydrogen-air premixture in a millimeter scale monolith coated with Pt catalyst was investigated. As the combustor size decreases, the heat loss increases in proportion with the inverse of the scale of combustion chamber and combustion efficiency decreases in a conventional type of combustor. Combustion reaction assisted by catalyst can reduce the heat loss by decreasing the reaction temperature at which catalytic conversion takes place. Another advantage of catalytic combustion is that ignition is not required. Platinum was coated by incipient wetness method on a millimeter scale monolith with cell size of $1{\times}1mm$. Using this monolith as the core of the reaction chamber, temperatures were recorded at various locations along the flow direction. Burnt gas was passed to a gas chromatography system to measure the hydrogen content after the reaction. The measurements were made at various volume flow rate of the fuel-air premixture. The gas chromatography results showed the reaction was complete at all the test conditions and the reacting species penetrated the laminar boundary layer at the honeycomb and made contact with the catalyst coated surface. At all the measuring locations, the record showed monotonous increase of temperature during the measurement duration. And the temperature profile showed that the peak temperature is reached at the point nearest to the gas inlet and decreasing temperature along the flow direction.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3125-3134
• /
• 2010

한국에서 삼원촉매 내구성은 1988년에 5년/80,000 km 이지만 2002년 이후로 10년/120,000 km이 요구된다. 국내의 삼원촉매는 배출가스 정화효율이나 압력강하 등이 만족하지만 열적 내구성은 만족시키지 못하고 있다. 삼원촉매는 내부에서 높은 온도를 유지하지만 외부 표면에서는 낮은 온도를 유지한다. 본 연구는 열유동과 구조해석 및 다음과 같은 과정에 의해서 열적 내구성을 평가하였다. 열유동 매개변수 범위는 차량시험과 열유동 해석에 의해 결정하였다. 후면 촉매 온도에 대한 반응 표면은 열유동 매개변수에 대한 실험계획법을 이용해 구성되었다. 차량시험에서 후면 촉매 온도에 대한 열유동 매개변수는 만족도 함수에 의해 예측하였다. 삼원촉매의 온도분포는 예측된 열유동 매개변수에 대한 열유동 해석에 의해 평가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1304-1309
• /
• 2004

Synthesis of carbon nanotubes and nanofibers on a catalytic metal substrate, using an ethylene fueled inverse diffusion flame, was investigated. Multi-walled carbon nanotubes, with diameters of 20 - 60nm, were formed on the substrate coated with nickel-nitrate in the region of 5 - 6mm from the flame center along the radial direction. The gas temperature for this region was ranging from about 1400 to 900K. Nickel particles originated from the coated nickel-nitrate on the substrate were the major catalyst for the formation of the nanomaterials. HR-TEM and Raman spectrum revealed that synthesized carbon nanotubes had multi-walled structures with some defective graphite layers at walls.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.52-58
• /
• 2010

Human histamine H1 receptor (HHR1) is a G protein-coupled receptor and a primary target for antiallergic therapy. Here, the ligand-based three-dimensional pharmacophore models were built from a set of known HHR1 inverse agonists using HypoGen module of CATALYST software. All ten generated pharmacophore models consist of five essential features: hydrogen bond acceptor, ring aromatic, positive ionizable and two hydrophobic functions. Best model had a correlation coefficient of 0.854 for training set compounds and it was validated with an external test set with a high correlation value of 0.925. Using this model Maybridge database containing 60,000 compounds was screened for potential leads. A rigorous screening for drug-like compounds unveiled RH01692 and SPB00834, two novel molecules for HHR1 with good CATALYST fit and estimated activity values. The new lead molecules were docked into the active site of constructed HHR1 homology model based on recently crystallized squid rhodopsin as template. Both the hit compounds were found to have critical interactions with Glu177, Phe432 and other important amino acids. The interpretations of this study may effectively be deployed in designing of novel HHR1 inverse agonists.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1480-1488
• /
• 2003

Synthesis of carbon nanomaterials on a substrate coated with metal nitrates using an ethylene fueled inverse diffusion flame was illustrated. The effects of radial distance, residence time of the substrate, and hydrocarbon composition on the synthesis of carbon nanomaterials were investigated. The effects of catalyst metal particles were also studied using SUS304 substrates coated with Fe(NO$_3$)$_3$ (ferric nitrate, nonahydrate) and Ni(NO$_3$)$_2$(nickel nitrate, hexahydrate), and Cu substrate. Carbon nanomaterials, with diameters ranging from 30 - 70 nm, were observed on the substrate for both cases of using substrates only and using them with metal nitrates. In case of using the substrate with metal nitrates, the formation and growth of carbon nanomaterials were occurred in the lower temperature region than that of using the substrates only due to the easy activation of the metal particles coated on the surface of the substrates.

• 전기화학회지
• /
• 제23권4호
• /
• pp.97-104
• /
• 2020

전기 물 분해 기술 중 주요 과제 중 하나는 귀금속의 Ir과 Ru 기반의 촉매를 대체할 수 있는 고성능, 저비용의 산소 발생 반응 (OER) 촉매를 개발하는 것이다. 본 연구에서는 CoSO₄와 Fe(NO₃)₃ 수용액을 1차 가열 후 KNO₃와 NaOH 추가 반응을 이용한 침전법을 이용하여 OER 촉매로 사용 가능한 역스피넬 구조의 약 44 nm 크기를 갖는 CoFe₂O₄ 나노 입자를 합성하였다. CoFe₂O₄ 나노 입자의 합성 시간을 조절하여 입자 및 결정립 크기를 제어하였다. CoFe₂O₄ 나노 입자의 합성 시간이 6시간일 때, 높은 전도성과 전기 화학 표면적을 가졌다. 이 CoFe₂O₄ (6 h)는 전류 밀도 10 mA/㎠의 과전압 및 Tafel slope는 각각 395 mV 및 52 mV/dec으로 나타났다. 또한, 이 촉매는 10 mA/㎠에서 18시간 동안 우수한 내구성을 나타냈다.