• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

• (The) Research of the performance art and culture
• /
• no.42
• /
• pp.107-146
• /
• 2021

This article examined the current status of performance activities in the theaters in Ulsan during the Japanese colonial period, and examined the characteristics and social roles of performance culture at that time.,The cultural space during the Japanese colonial period can be divided into theater space and semi-theater space.,The theater spaces in Ulsan include Daejeonggwan, Sangbanggwan, and Ulsan Theater. The semi-theater spaces include Ulsan Youth Center, Ulsan Youth Alliance Hall, Barrack Youth Hall, Eonyang Youth Alliance Hall, Eonyang Christian Hall, Eonyang Christian Hall, Eonyang Inn, Eonyang Public Inn, Eonyang Public Normal School, Seosaeng School, Ulsan Public Aid Auditorium, Night school.,These spaces not only held events or performances for a specific purpose, but also played a role as public spaces producing local discourse. The theater was a complex cultural space where performances are performed along with movie performances, and artists and audiences meet.,Furthermore, the theater provided a special experience of producing and consuming various issues such as colonial modernization, modern city formation, and the emergence of new popular culture beyond the meaning of stage space.,The theaters in Ulsan also functioned as a space to represent the foreign culture acceptance, leisure activities, the performance and viewing of cultural contents, and the artistic skills of local artists in accordance with the purpose of establishing local theaters.,It was a base space for local discourse production and enjoyment activities by holding political rallies, meetings, lecture activities, and various conferences.,Political rallies were also concerts, enlightenment activities were also accompanied by film screenings, and music performances were associated with dance performances and charity gatherings.,In particular, Ulsan Theater, which is the first theater in Ulsan, and the role of the public hall, held a lecture, debate, and oratory for public enlightenment along with performances such as musical drama, children's song contest, fairy tale contest, small-sized play performance,, It was widely used as a large-scale rallying place, and served as a public hall, such as a place to visit outside theaters. Thus, the theater and semi-theater space in Ulsan during the Japanese colonial period improved the cultural level of the region, fulfilling the aesthetic needs of the local people and faithfully fulfilling the social role as a public sphere leading the public opinion and agenda.,And it was also positioned as an alternative public area of ​​modern society and also played a role as a public institution.

• Radiation Oncology Journal
• /
• v.23 no.4
• /
• pp.236-242
• /
• 2005

Purpose: To evaluate the role of surgical clips and scars in determining electron boost field for early stage breast cancer undergoing conserving surgery and postoperative radiotherapy and to provide an optimal method in drawing the boost field. Materials and Methods: Twenty patients who had $4{\sim}7$ surgical clips in the excision cavity were selected for this study. The depth informations were obtained to determine electron energy by measuring the distance from the skin to chest wall (SCD) and to the clip implanted in the most posterior area of tumor bed. Three different electron fields were outlined on a simulation film. The radiological tumor bed was determined by connecting all the clips implanted during surgery Clinical field (CF) was drawn by adding 3 cm margin around surgical scar. Surgical field (SF) was drawn by adding 2 cm margin around surgical clips and an Ideal field (IF) was outlined by adding 2 cm margin around both scar and clips. These fields were digitized into our planning system to measure the area of each separate field. The areas of the three different electron boost fields were compared. Finally, surgical clips were contoured on axial CT images and dose volume histogram was plotted to investigate 3-dimensional coverage of the clips. Results : The average depth difference between SCD and the maximal clip location was $0.7{\pm}0.55cm$. Greater difference of 5 mm or more was seen in 12 patients. The average shift between the borders of scar and clips were 1.7 1.2, 1.2, and 0.9 cm in superior, inferior, medial, and lateral directions, respectively. The area of the CF was larger than SF and IF in 6y20 patients. In 15/20 patients, the area difference between SF and if was less than 5%. One to three clips were seen outside the CF in 15/20 patients. In addition, dosimetrically inadequate coverage of clips (less than 80% of prescribed dose) were observed in 17/20 patients when CF was used as the boost field. Conclusion: The electron field determined from clinical scar underestimates the tumor bed in superior-inferior direction significantly and thereby underdosing the tissue at risk. The electron field obtained from surgical clips alone dose not cover the entire scar properly As a consequence, our technique, which combines the surgical clips and clinical scars in determining electron boost field, was proved to be effective in minimizing the geographical miss as well as normal tissue complications.

• Science of Emotion and Sensibility
• /
• v.23 no.4
• /
• pp.105-116
• /
• 2020

The purpose of this study is to progress the limitations and disadvantages of existing safety clothing by applying high technology to current safety clothing that is produced and distributed only with fluorescent fabrics and retroreflective materials. Therefore, the industrial suspender-type safety belt and engineering technology are introduced, designed, and fabricated to help save a life in an emergency. First, the suspender-type safety belt to be developed is designed to emit light by LED attached to the film, and the body of the belt-wearer is recognized from a distance through retroreflection from the flashing LED. It aims to support people's safety by preventing accidents during roadside work, rescue activities, and sports activities at night. Second, with the development of advanced devices when the user is in an unconscious state due to distress or falls into an unconscious state due to distress or accident, the tilt sensor of the control unit attached to the belt automatically detects the angle of the human body and generates light and sound. It is intended to further enhance the utilization by mounting a sensing and signaling device that generates a distress signal and shaping it in the form of a belt attached to a vest that can be easily detached from the outside of the garment. When the wearer falls due to an accident, the tilt sensor of this belt detects the angle change and then the controller generates a high-frequency sound and repeated LED blinking signals at the same time. In the case of conventional safety vests, it is almost impossible to detect that the person is wearing a vest when there is no ambient light, but in case of the safety belts in this study, the sound and light signals of the safety belt enable us to find the wearer within 100 meters even when there is no ambient light.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.77-90
• /
• 2020

Today, the transition to the era of "post-drama" brought a change in the position of text, which was considered the center of the play, and the expansion of the role of actors. After entering the post-drama era, the actor no longer transforms himself into "delivering" the fixed meaning of text, but "producing" the valid meaning of "now, here" meeting the audience. In other words, actors in the post-drama era have expanded their roles as "performers" who can become the subject of narratives themselves and create various theatrical languages. Despite the expansion of the actor's role, verbal-centered actor training through text, which still forms the basis of acting education, does not satisfy the newly changing contemporary theatricality and creates a gap between education and the field. Therefore, the researcher argued that non-verbal-centered acting education needs to be discussed, and highlighted the actors' physical training on the "empty" side. The researchers first compare and analyze the characteristics of modern theater people's training methods from an "empty" perspective. Based on this, researchers about the meaning and direction of the training "empty". Furthermore, the study concludes with an emphasis on the direction of acting education in the post-drama era, which is free from language that can respond to stimuli and interact freely.

• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.239-244
• /
• 1972

Commercial edible soybean oil was introduced into plastic containers. Colorless transparent (control), red transparent, green transparent cellophane films and, also, colorless transparent cellophane films coated respectively with Cemedine C, Cemedine C containing 10% pyridine, benzophenone, and p-aminobenzoic acid were prepared, and the % transmittance of each film to lights at U.V. and visible regions were measured. The containers were covered with the films and irradiated simultaneously with direct sunlight for 4.5 hours daily. The peroxide values of the oils in the plastic containers were determined at regular intervals. The effects of the Alms on the PV development of the oils were compared with that of the control, i.e., the colorless transparent films.The red and green films showed strong retarding effects ell the PV development. The red films showed a slightly stronger effect than the green ones. The colorless transparent films coated with Cemedine C showed an appreciable retarding effect. The films had absorbed the lights at the U.V. and visible regions considerably. The pyridine and benzophenone coated films lost their retarding effects after 10 and 4 days respectively. The p- aminobenzoic acid coated films showed a considerable retarding effect throughout the experimental period. The films had absorbed the lights strongly .As a whole, the retarding effects of the films on the PV development were, in decreasing order. as follows; Red> Green> p-Aminobenzoic acid coated > Cemedine Ccoated) Control > Pyridine coated > Benz ophenone coated

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.59-83
• /
• 2015

Magical realism, blooming and improving in Latin America, opened the new vision about reality and rationalism, coming out from the out-styled frame of past. While having common points with unrealistic literature, which uses fantastical components, magical realism is different from Surrealism and fantasy literature that is focusing on reality and realizing reality intensely. In the early stage of this research, magical realism was restricted by the characteristics of literature of Latin America, but the research of magical realism is expanding in planning Post-Modernism nowadays. Lately, the influence of magical realism is identified in literatures, arts, films, and animations over the world; according to the research, however, research about magical realism in animations was not done in Korea before. A Korean independent animation "A coffee vending machine and its sword" was evaluated positively in many international film festivals is valuable as the research of magical realism. Throughout this study, this animation "A coffee vending machine and its sword" was analyzed by its narrative and images. The analysis of narrative consists two parts. One is about the form of narrative and the other is about contents through the story. Analysis of Image is also divided into two parts: background image and character image. In this animation, the protagonist is narrating about the fantastic accidents in his life and his own feelings towards it. The narration leads audience to understand his situation and feelings in meta-fiction. On the surface, audience watches the love story of a normal girl and coffee vending machine in this artwork, but deep inside the animation, it is visible that the directors tried to make audiences think about the life of 880,000-won Generation in Korea. The background image was represented as real places in Seoul including the landmark of Seoul, making mimesis of reality in Korea. The character image has two conflicting aspects with reincarnated warrior, Jinyoungyoung and a coffee vending machine. It is a hybrid-character transmogrifying between two characters. Likewise, "A coffee vending machine and its sword" has the characteristics of Korean magical realism through form, content and image. Through analyzing the Korean independent animation "A coffee vending machine and its sword", this research tried to find a way of using factors of fantasy, of representing reality as a dramatic device and of using magical realism of Korean animation for bond of sympathy with audience.

• Journal of the Korean Electrochemical Society
• /
• v.20 no.1
• /
• pp.7-12
• /
• 2017

Using a precursor of $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ as a starting material, a surface-modified cathode material was obtained by coating with KCl, where the added KCl reduces residual Li compounds such as $Li_2CO_3$ and LiOH, on the surface. The resulting electrochemical properties were investigated. The amounts of $Li_2CO_3$ and LiOH decreased from 8,464 ppm to 1,639 ppm and from 8,088 ppm to 6,287 ppm, respectively, with 1 wt% KCl added $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ that had been calcined at $800^{\circ}C$. X-ray diffraction results revealed that 1 wt% of KCl added $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ did not affect the parent structure but enhanced the development of hexagonal crystallites. Additionally, the charge transfer resistance ($R_{ct}$) decreased dramatically from $225{\Omega}$ to $99{\Omega}$, and the discharge capacity increased to 182.73mAh/g. Using atomic force microscopy, we observed that the surface area decreased by half because of the exothermic heat released by the Li residues. The reduced surface area protects the cathode material from reacting with the electrolyte and hinders the development of a solid electrolyte interphase (SEI) film on the surface of the oxide particles. Finally, we found that the introduction of KCl into $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ is a very effective method of enhancing the electrochemical properties of this active material by reducing the residual Li. To the best of our knowledge, this report is the first to demonstrate this phenomenon.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.14 no.1
• /
• pp.35-42
• /
• 2008

Twenty eight gas impermeable plastic films for food-contact application were collected in the domestic market and material and/or migration tests for overall migration, antioxidants, potassium permanganate consumption, heavy metal, and plasticizers were carried out. The average overall migration values for NY/PE or NY/LLDPE, PETP/PE, and PVDC packaging films obtained by using n-heptane as fatty food simulant were 7.6, 6.9 and 14.1 mg/L, respectively. These values were much lower than the limit values of 150 and 30 mg/L for polyethylene and polyvinylidene chloride prescribed in the Korea Food Code. In almost of the packaging materials tested, the antioxidants such as Irganox 1010, Irganox 1076 and Irgafos 168 were found. The migration test result showed that almost of all samples except PVDC film contained Irganox 1076 and Irgafos 168, while the maximum migration value of Irganox 1076 into n-heptane was found in the Ny/PE/LLDPE(15/25/50 ${\mu}m$) sample at the concentration of 216.9 ${\mu}g/g$. From the plastic packaging samples tested, plasticizers such as DEP, DPRP, DBP, DPP, BBP, DCHP, DEHP, DEHA and observed above the detection limit. Consumption amount of potassium permanganate was much lower than the limit value of 10 mg/L. In the material test for heavy metals, cadmium and lead were determined at the concentrations far below the limit value of 100 mg/kg. The migration test for cadmium and lead showed a lower value than the detection limit. Therefore, it can be concluded that the safety status of the plastic films tested met the requirement of limit values as prescribed for the material and migration tests of food packaging utensils, containers and packages of the Korea Food Code.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.11-18
• /
• 2004

The eruption of permanent teeth represents the movement in the alveolar bone before appearance in oral cavity, to the occlusal plane after appearance in oral cavity, and additive movement after reaching th the occlusal plane. Tooth eruption is mostly controlled by genetic signals. The eruption stage is divided to preeruptive alveolar stage, alveolar bone stage, mucosal stage according to the process of growth and development. If the disturbance is occured in any stage of eruption, tooth does not erupt. The cause of eruption disturbance are ectopic position of the tooth germ, obstruction of the eruption path and defects in the follicle or PDL. In the treatment of eruption disturbance, surgical procedures are commonly used. There are three kind of surgical procedure ; surgical exposure, surgical repositioning, surgical exposure and traction Surgical exposure is basic procedure. This involves removal of mucosa, bone, lesion that are surrounding the teeth, dental sac when necessary to maintain a patent channel between the crown and the normal eruptive path into the oral cavity. To ensure this patency, many techniques including cementation of a celluloid crown, packing with gutta-percha or zinc oxide-eugenol, or a surgical pack, are used. When surgical exposure is conducted, operators should not expose any part of cervical root cement and not injure periodontium or root of adjunct tooth. After surgical exposure, tooth should be surrounded by keratinized gingiva. There is direct relationship between the extent of development of pathophysiologic aberrations and the intensity of the manipulative injury inflicted on the tooth by surgical treatment, so operator should consider this thing. In these cases, surgical exposure is conducted on Maxillary 1st milars that have a eruption disturbance and improve the eruption disturbance effectively.