• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1169-1171
• /
• 2002

In this paper, RFRPP(Random Frequency Randomized Pulse Position ) PWM for three-phase voltage-controlled inverters is proposed. The LLPWM(Lead-Lag PWM) techinquc is that three switching pulses are located randomly back and forth in each switching interval. But with the restriction of random distribution, the harmonic spectrum cannot be dispersedly and continuously distributed. This paper calculates the duty ratio of the switching pulse firstly. Second, the switching pulses are located randomly in the switching interval. Third, the fixed switching frequency of the space vector modulation is randomly varied. To verify the validity of the proposed technique, simulation study is tried using Matlab/Simulink. When a proposed techniquc is employed, the harmonic spectrum of the inverter output voltagc varies from one cycle to the next and the EMI(Electromagnetic Interference) and resonant vibration are greatly alleviated.

• Journal of Integrative Natural Science
• /
• v.5 no.4
• /
• pp.246-252
• /
• 2012

Multivariate cumulative sum (CUSUM) control charts for simultaneously monitoring both means and variances under multivariate normal process are investigated. Performances of multivariate CUSUM schemes are evaluated for matched fixed sampling interval (FSI) and variable sampling interval (VSI) features in terms of average time to signal (ATS), average number of samples to signal (ANSS). Multivariate Shewhart charts are also considered to compare the properties of multivariate CUSUM charts. Numerical results show that presented CUSUM charts are more efficient than the corresponding Shewhart chart for small or moderate shifts and VSI feature with two sampling intervals is more efficient than FSI feature. When small changes in the production process have occurred, CUSUM chart with small reference values will be recommended in terms of the time to signal.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.155-162
• /
• 1999

reliability from components reliability. In this case, it assumes that components failure is mutually independent, but it may not true in real systems. In this study, the mean cost per unit time is computed as the ratio of mean life to the mean cost. The mean life is obtained by the reliability function under power rule model. The mean cost is obtained by the mathematical model based on the inspection interval. A heuristic method is proposed to determine the optimal number of redundant units and the optimal inspection interval to minimize the mean cost per unit time. The assumptions of this study are as following : First, in the load-sharing k-out-of-n:G system, total loads are applied to the system and shared by the operating components. Secondly, the number of failed components affects the failure rate of surviving components as a function of the total load applied. Finally, the relation between the load and the failure rate of surviving components is set by the power rule model. For the practical application of the above methods, numerical examples are presented.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.195-203
• /
• 2007

In this paper, an analytic model of sleep model operation in the IEEE 802.16e is investigated. A mobile subscribe. station (MSS) goes to sleep mode after negotiations with the base station (BS) and wakes up periodically for a short interval to check whether there is downlink traffic to it. If the arrival of traffic is notified, an MSS returns to wake mode. Otherwise, it again enters increased sleep interval which is double as the previous one. In order to consider the situation more practically, we propose the sleep mode starting threshold, during which MSS should await packets before it enters the sleep mode. By modifying the M/G/1 with multiple vacations model, energy consumption ratio(ECR) and average packet response time are calculated. Our analytic model provides potential guidance in determining the optimal parameters values such as sleep mode starting threshold, minimal sleep and maximal sleep window.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.211-218
• /
• 1998

A variable flow-controlled boom sprayer was developed and evaluated. Field tests were conducted to evaluate the adoptability of the sprayerr with optimal conditions. Negative response time was obtained from the field test because pump and PTO were interlocked with the speed of sprayer. Another reason for the negative value was due to the definition of the response time. With constant on-time control, the system was unstable at the conditions of small tolerance and long control interval. The performances of the spray system were stable and accurate. The stable and synchronous responses were achieved with a variable on-time control. The flow control system with an optimal condition (1.0 sec of control interval, 2 of damping ratio, 1% of tolerance) provided the proper performance for uniform spraying. A standard operating procedure of the flow compensating boom sprayer for the ground speed variation was presented and recommended.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.65.4-65
• /
• 2002

In this paper, RSF+RPP(Random Switching Frequency Ran-domized Pulse Position) PWM for three-phase voltage-controlled inverter is proposed. The LLPWM(Lead-Lag PWM) technique is that three switching pulses are located randomly back and forth in each switching interval But with the restriction of random distribution, the harmonic spectrum cannot be dispersedly and continuously distributed. To tackle this problem , First, the switching frequency is varied randomly. Next, the duty ratio is calculated under the first circumstance. Finally, the switching pulses are located randomly in the switching interval. To verify the validity of the proposed technique, Simulation Study is tried Using Matlab/Si...

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.66-69
• /
• 2003

This paper presents the procedures for the evaluation of the maximum surface roughness and the shapes of the cut remainder employing the ridge method. The shapes and the heights of the cut remainder are estimated by overlapping adjacent ridges in consideration of the various machining parameters: the feedrate. the path interval. The maximum surface roughness in plane cutting modes are derived as a function of the maximum effective cutter radius, R$\_$eff,max/. and the path interval ratio, $\tau$$\_$fp/, The predicted results are compared with the values estimated by the conventional roughness model.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.225-232
• /
• 2007

This work intends to investigate the effects of shift characteristics on the propulsion performance of a manual wheelchair with an automatic transmission. A planetary gear train is employed to generate a two-stage shift automatically, based on the distance traveled from rest. Motion analysis has been performed for measuring kinematic properties of the arm and then the inverse dynamics has been applied for estimating joint forces/torques. Then, a parametric study has been performed to find a set of the shift ratios and the shift intervals for optimizing propulsion performance. Results show that the propulsion performance is closely related to the shift condition. It is found that a short shift interval is desirable for a short distance propulsion. However, an optimum shift interval for a long distance propulsion is inversely proportional to the shift ratio approximately. Consequently, the automatic transmission can greatly lower the joint loadings by the speed reduction, which eventually contribute to prevent joint injuries of wheelchair users.

• Structural Engineering and Mechanics
• /
• v.46 no.4
• /
• pp.447-458
• /
• 2013

Splitting tensile strength (STS) is a respectable mechanical property reflecting ability of the concrete. The STS of concrete is mainly related to compressive strength (CS), water/binder (W/B) ratio and concrete age. In this study, the assessment of STS is made by a novel uncertainty-oriented method which uses least square optimization and then predicts STS of concrete by uncertain (fuzzy) numbers. The approximation method addresses a novel integration of fuzzy set theory and multivariate statistics. The numerical examples showed that the method is applicable with relatively limited data. In addition, the prediction of uncertainty at various levels of possibility can be described. In conclusion, the uncertainty-oriented interval analysis can be suggested an effective tool for appraising the uncertainties in concrete technology.

• Korean Journal of Veterinary Research
• /
• v.62 no.2
• /
• pp.15.1-15.8
• /
• 2022

The objective of this study was to identify risk factors for repeat breeder dairy cows and their impact on reproductive performance. The characteristics of 1,504 cows, including their peripartum health, nutrition, production, and reproduction, were collected. Cows with metabolic disorder were significantly more likely (odds ratio [OR], 2.47; p < 0.001) and cows with clinical endometritis tended to be more likely (OR, 1.35; p < 0.1) to become repeat breeders than cows without metabolic disorder and clinical endometritis, respectively. Cows initially inseminated > 80 days after calving were less likely (OR, 0.78; p < 0.05) to become repeat breeders than cows initially inseminated ≤ 80 days after calving. As a result, repeat breeding in dairy cows resulted in a 90 day longer (p < 0.0001) mean interval from calving to pregnancy. In conclusion, postpartum metabolic disorder, clinical endometritis, and a short interval from calving to initial insemination were risk factors for repeat breeder dairy cows, resulting in a severely impaired reproductive performance.