• 대한교통학회지
• /
• 제6권2호
• /
• pp.49-56
• /
• 1988

Alternate use of lane at a signalized intersection is a quite different control of the operation of an intersection. This control introduces a new stop line and signal before the original stop line. All of the lanes between the two stop lines are used for left turn traffic or through traffic at a time. The purpose of the control is increasing the capacity of a n intersection without widening the approach width. this paper contains a study on the condition of a application, the proper distances between the two stop lines, the reasonable offsets(rear) to guarantee clearing the vehicles of previous phase, the comparison of approach capacity between the existing control and this control. The study results reveals that the offsets(rear) are rather stable showing the range(maximum value minus minimum value) of it's value does not exceed 3.6 seconds according to the field data. The approach capacity will be increased by 27%, 43%, 59%, 84% when the distances between the stop lines are 30.0m respectively. The control might have theoretical limitation to operate in practice. So an experimental application of the control at some suitable intersections prior to expanding it.

• 대한수학회보
• /
• 제60권2호
• /
• pp.485-494
• /
• 2023

Let Y be the quintic del Pezzo 4-fold defined by the linear section of Gr(2, 5) by ℙ⁷. In this paper, we describe the locus of double lines in the Hilbert scheme of coincs in Y. As a corollary, we obtain the desigularized model of the moduli space of stable maps of degree 2 in Y. We also compute the intersection Poincaré polynomial of the stable map space.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.172-178
• /
• 1999

3D linear and circular interpolations are a basic part for the machining of complex shapes. Until now, because of the absence of appropriate algorithms for the generation of 3D lines and circles, a full accomplishment for available machine tool resolution is difficult. this paper presents new algorithms for 3D linear and circular interpolation in the reference pulse technique. In 3D space, the line or circle is not expressed as an implicit function, it is only defined as the intersection of two surfaces. A 3D line is defined as the intersection of two planes, and a 3D circle is defined as the intersection of a plane and the surface of a sphere. Based on these concepts, interpolation algorithms are designed to follow intersection curves in 3D space, and a real-time 3D linear and circular interpolator was developed in software using a PC. The algorithm implemented in a PC showed promising results in interpolation error and speed performance. It is expected that it can be applied to the next generation computerized numerical control systems for the machining of 3D lines, circles and some other complex shapes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권4호
• /
• pp.177-184
• /
• 2010

In this study, geometric modeling techniques and their application to ship modeling and design are presented. Traditionally the hull shape is defined by using curves called the lines and various necessary computations are performed based on the discrete points obtained from the lines. However, some applications find difficulty in using the lines such as seakeeping analysis, which requires the computation of wetted part that is changing dynamically over time. To overcome such a problem and increase accuracy and efficiency in computation, two essential geometric modeling techniques, surface modeling and surface-to-surface intersection, are introduced and their application to ship modeling and analysis including hydrostatic computation, slamming and seakeeping analyses is presented.

• 한국컴퓨터그래픽스학회논문지
• /
• 제6권4호
• /
• pp.29-34
• /
• 2000

이 논문에서는 평행이동곡면 (surface of extrusion) 과 임의의 자유곡면 사이의 교차곡선의 구조를 분석하고 이를 계산하는 방법에 대해 설명한다. 평행이동곡면의 이동방향에 대하여 다른 곡면의 윤곽곡선 (silhouette curve) 을 구하고, 이를 평행이동곡면의 기준곡선과 교차시킴으로써 교차곡선의 구조를 분석한다. 또한, 교차곡선이 존재하는 범위와 특이점을 구함으로써 교차곡선 전체를 안정적이고 효율적으로 계산하는 알고리즘을 제시한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.626-630
• /
• 1996

The most important problem in NC machining of a freeform mold surface is removal of tool interference. In this paper three methods are introduced to remove self-intersection on offsetted freeform surface for 3-axis NC. All methods are using intersectional offset curves on original offset surface. The fast method is sequential loop check using two lines which have two neighbor points of intersectional offset curves.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.262-269
• /
• 2003

An approach to compute characteristic curves such as section curves, reflection characteristic lines, and asymptotic curves on a surface is introduced. Each problem is formulated as a surface-plane inter-section problem. A single-valued function that represents the characteristics of a problem constructs a property surface on parametric space. Using a contouring algorithm, the property surface is intersected with a horizontal plane. The solution of the intersection yields a series of points which are mapped into object space to become characteristic curves. The approach proposed in this paper eliminates the use of traditional searching methods or non-linear differential equation solvers. Since the contouring algorithm has been known to be very robust and rapid, most of the problems are solved efficiently in realtime for the purpose of visualization. This approach can be extended to any geometric problem, if used with an appropriate formulation.

• The Korean Journal of Ecology
• /
• 제15권1호
• /
• pp.1-7
• /
• 1992

The dvelopment of leaves in soybean(glycine max cv. yellow grain and glycine max cv. black grain)plant were assessed for the applicability of the plastochron index. The plastochron ages versus time in days were respectively 6.4 days in black grain and 9.6 days in yellow grain. Plots of plastochron indes(pi) versus time were linear, there were two distinct groups of regression line. when a point of intersection in the lines were upper than the reference length, pi was estimated n+(ln Ln-ln LR)/(ln Ln-ln Ln+2) or (n-1)+(ln Ln-1-ln LR)/(ln Ln-1-ln Ln+1) . When a point of intersection in the lines were less than the reference length, pl was estimated n+(ln Ln-ln LR)/(ln Ln-ln Ln+2) or (n-1)+(ln Ln-1-ln LR)/(ln Ln-1-ln Ln+1) . The growth rate of black grain plants analysed by pl was higher than yellow grain plants.

• 통합자연과학논문집
• /
• 제10권1호
• /
• pp.27-32
• /
• 2017

In this paper we consider the two tangent lines of isogonal and isotomic conjugates of the line at both vertices of a given triangle. We find the necessary and sufficient condition for the two tangent lines of isogonal or isotomic conjugates of the line at both vertices and the median line to be concurrent. We also prove that every line whose isogonal conjugate tangent lines at both vertices are concurrent with the median line intersects at a unique point. Moreover, we show that the three intersection points correspond to the vertices of triangle are collinear.

• 로봇학회논문지
• /
• 제10권1호
• /
• pp.9-15
• /
• 2015

We present a robust power transmission lines detection method based on vanishing point estimation. Vanishing point estimation can be helpful to detect power transmission lines because parallel lines converge on the vanishing point in a projected 2D image. However, it is not easy to estimate the vanishing point correctly in an image with complex background. Thus, we first propose a vanishing point estimation method on power transmission lines by using a probabilistic voting procedure based on intersection points of line segments. In images obtained by our system, power transmission lines are located in a fan-shaped area centered on this estimated vanishing point, and therefore we select the line segments that converge to the estimated vanishing point as candidate line segments for power transmission lines only in this fan-shaped area. Finally, we detect the power transmission lines from these candidate line segments. Experimental results show that the proposed method is robust to noise and efficient to detect power transmission lines.