• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.413-417
• /
• 2014

In coherent superhigh speed optical transmission link, compensating the system impairments are critical issues. Among these issues, phase noise and carrier frequency offset are the most important impairments which interrupt the signal recovery. This paper suggests a algorithm of digital signal processing that compensates the phase noise and carrier frequency offset and verified its validity. The suggested digital signal processing algorithm has a lower computational complexity compared with the previous algorithms, so it can ease the burden of signal processing at the receiver to provide high speed optical transmission system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.7-15
• /
• 2002

This paper is concerned with remote environment monitoring & control for the breeding house as scattering far and wide. The environment data is detected in the breeding house that is collected to one processor. It's adapted to the PSTN(public switch tele-phone network) and multi-processing for exchange the environment data and the control data in between the manager and a breeding house by micro-processor. We have designed the algorithm of the communication sequence through the experimental research. This system is composed of sensor interface, FSK communications, LED display, data latch and MCS-51 single-chip. The S/W is composed with data acquisition by multi-processing, data communication and interrupt. And this paper is Proposed the DB structure algorithm concern to a mount scale using web design. The subject is a performance of effective management for the breeding house.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.207-215
• /
• 2014

In this paper, we propose a Micro Real-Time Control System (MRTCS) for decreasing the delay during interrupts processing and data transfer on sensor nodes. The MRTCS consists of a control, sensor nodes based on Controller Area Network (CAN) device. The control node was designed with Real Time Operating System (RTOS) on top of the small Micro Control Unit (sMCU). Sensor nodes have the CAN device without sMCU, which have multiple Digital Inputs, Outputs (DI/DO) and the CAN controller. We have evaluated with OCTAVE v3.6.4 from open source for system performance. Simulation results show that the system performance was increased through the delay reducing for interrupt processing and internal data transfer. We verify that a proposed MRTCS approach will be adapted to various real-time control system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2017

The lower $2^{nd}$ molar eruption is beginning to mesiolingually, then rotate to distobuccally so it has a tendency to be tilted and impacted mesially. Signs and symptoms of impacted $2^{nd}$ molar are similar to impacted $3^{rd}$ molar's. However, treatment plan for impacted $2^{nd}$ molar is different from that of impacted $3^{rd}$'s. The former is the preservation and uprighting of $2^{nd}$ molar so that it could act to recovery of mastication, symmetrical facial growth, maintaining the symmetry of dental arch, stable occlusion, while the latter is the extraction of tooth. If the uprighting treatment is planned, most proper protocol of treatment and the additional treatment opition should be applied with consideration for it's crown exposure, present of $3^{rd}$ molar which interrupt the uprighting process, extrusion of opposite tooth. Although it could not improve the esthetic result, it could prevent many dental problems. Therefore, uprighting for impacted lower $2^{nd}$ molar is meaningful treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.137-143
• /
• 2017

X-ray image is a widely used to medical examination, airport security and cargo inspection. However, X-ray images contain many visual noise, which interrupt image analysis. Consequently, it is primary importance to reduce noises of X-ray image. In this paper, we present a improved denoise technique for x-ray image using pixel value and range weights. First, we denoise a x-ray image using bilateral filter. Next, we detect a edge region of the original x-ray image. If a denoised pixel belongs to the edge region, we calculate weighting values of original x-ray image and denoised x-ray image in $3{\times}3$ neighboring pixels and compute the cost value to determine the boundary pixel value. Finally, the pixel value having minimum cost is determined as the pixel value of the denoised x-ray image. Simulation results show that the proposed algorithm achieves good performance in terns of PSNR comparison and subjective visual quality.

• The KIPS Transactions:PartA
• /
• v.9A no.2
• /
• pp.147-162
• /
• 2002

Multi-processor system with fast I/O devices improves processing performance and reduces the bottleneck by I/O concentration. In the system, the Performance influenced by shared memory used for exchanging data between processors varies with configuration and utilization. This paper suggests a prediction model for buffer and shared memory optimization under interrupt recognition method using mailbox. Ethernet (IEEE 802.3) packets are used as the input of system and the amount of utilized memory is measured for different network bandwidth and burstiness. Some empirical studies show that the amount of buffer and shared memory varies with packet concentration rate as well as I/O bandwidth. And the studies also show the correlation between two memories.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4B
• /
• pp.403-410
• /
• 2004

In general communication system is composed of processor subsystems, I/O processor subsystems and data storage device subsystems those are classified as their functions. In order to improve the data reliability, all subsystems are redundant. Storage device keeps the operational information such as system related information and charging information, and such informations must be stored in non-volatile memory. Flash memory and battery backup memory are commonly used as the non-volatile storage devices. But such kind of memories are expensive per unit capacity and data can't be restored when lost while not being backed up. In this paper we develop a redundant storage device to store a lot of data safely and reliably in communication system. The device consists of micro-controller, FPGA and hard disk It provides many functions those are rebuilding, automatic remapping, host service and remote host service. Also it is designed to provide host service while rebuilding is being done in order not to interrupt the communication services. The developed device can be used instead of expensive storage device like flash memory in various communication systems.

• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.19-24
• /
• 2012

As the representative of the convergence of broadcasting and communication, the data service was expected to be a new profit source of the related industries. The data service, however, has not satisfied the expectation due to the short of killer services that make it popular with the viewers. According to the several survey reports, a lot of viewers do internet-searching using the key-words related to the TV program they are watching and, with the faith in the survey results, several trials has been performed to port established PC-based searching systems onto TV-set only to fail to get popularity among viewers. The failures are mainly caused that they did not sufficiently consider the viewers' modality that viewers seriously want not to be obstructed by anything when they are absorbed in a program. This paper proposes an MHP-based searching data service designed to minimally interrupt the viewers watching a TV program and to be synchronized with a TV program by using the searching key-words relative to it, the content of which changes as time goes on.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.5
• /
• pp.278-283
• /
• 2016

Objectives: The maxillary sinus mucosa is reported to recover to preoperative sterility after sinus floor elevation. However, when drainage of maxillary sinus is impaired, recovery can be delayed and maxillary sinusitis can occur. Therefore, in this study, we investigated the correlations between anatomic variants that can interrupt the ostium of the maxillary sinus and incidence of complication after sinus lifting. Materials and Methods: The subjects are 81 patients who underwent sinus lifting in Wonkwang University Dental Hospital (Iksan, Korea). Computed tomography (CT) images of the subjects were reviewed for presence of nasal septum deviation, anatomic variants of the middle turbinate, and Haller cells. Correlations between anatomic variations and occurrence of maxillary sinusitis were statistically analyzed. Results: Patients with anatomic variants of ostio-meatal units, such as deviated nasal septum, concha bullosa or paradoxical curvature of the middle turbinate, or Haller cells, showed a higher rate of complication. However, only presence of Haller cell showed statistically significant. Conclusion: Before sinus lifting, CT images are recommended to detect anatomic variants of the ostio-meatal complex. If disadvantageous anatomic variants are detected, the use of nasal decongestants should be considered to reduce the risk of postoperative sinusitis.