• 대한방사선기술학회지:방사선기술과학
• /
• 제44권4호
• /
• pp.375-380
• /
• 2021

This study aim was quantitative assessment of MTFs of spectrum of the square wave chart images and Coltman chart images for 0°, 1.7°, 2.2°, 2.9°, 4.1° by using chart method. In general device was AccuRay-650 (DK Medical System, Korea) used, indirect flat panel detector(FPD) Aero (Konica, Japan) used and MATLAB R2019a (MathWorks, USA) used. The result of comparison for each angle of MTF the edge image was highest quantitatively value for MTF finding of showed the best value of 0.1 based on the frequency of 3.5 mm^-1, value of 0.1 based on the square wave was frequency of 3.0 mm^-1 and value of 0.1 based on the Coltman transform was frequency of 2.4 mm^-1. In this study it was significant that the methodology of the international Electro-technical Commission was applied mutandis by using the Fujita method within 2~3°.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.457-462
• /
• 2018

The purpose of this study was to compare image quality of indirect digital radiography (IDR) system using the International Electro-technical Commission standard (IEC 62220-1), and to suggest the analysis of noise power spectrum (NPS) which were applied to IEC 62220-1 in medical imaging. In this study, Pixium 4600 (Trixell, France) which is indirect flat panel detector (FPD) was used. The size of image receptor (IR) is $7{\times}17$ inch (matrix $3001{\times}3001$) which performed 14bit processing and pixel pitch is $143{\mu}m$. In IEC standard, NPS evaluation were applied to RQA3, RQA5, RQA7 and RQA9. Because of different radiation quality, each region of interesting (ROI) were compared. The results of NPS indicated up to $3.5mm^{-1}$ including low Nyquist frequency. RQA5 indicated the lowest NPS and the others indicated higher NPS results relatively. NPS result of ROI a38 was higher than ROI a92 and this result indicated that there are more noise in left (cathode) than right (anode). This study were to evaluate NPS by using different radiation quality and setting the each ROI, and to suggest the quantitative methods of measuring NPS.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권4호
• /
• pp.259-263
• /
• 2019

This study was purpose to compare image quality of Indirect digital radiography (IDR) system by using the International electro-technical commission standard(IEC 62220-1) which were applied to IEC in medical imaging. To evaluation the analysis of Modulation transfer function(MTF) measurements edge device each angle by using edge method. In this study, Aero (Konica, Japan) which is Indirect flat panel detector(FPD) was used, the size of image receptor matrix $1994{\times}2430$ which performed 12bit processing and pixel pitch is $175{\mu}m$. In IEC standard method were applied to each angle were compared. The results of shown as LSF at $2.0^{\circ}$ and $3.0^{\circ}$ angeles. Shape is constant and shows smooth shape. The amount of data seemed reasonable and 2.19 cycles/mm and 2.01 cycles/mm at a spatial frequency of $2.0^{\circ}$ and $3.0^{\circ}$ at an MTF value of 0.1. At an MTF value of 0.5, the spatial frequencies were $2.0^{\circ}$ and 1.11 cycles/mm and 0.93 cycles/mm at an angle of $3.0^{\circ}$. This study were to evaluate MTF by setting the each $2{\sim}3^{\circ}$ each angle and to suggest the quantitative methods of measuring by using IEC.

• 산업경영시스템학회지
• /
• 제22권53호
• /
• pp.99-109
• /
• 1999

The International Organization for Standardization(ISO) is a worldwide federation of national standards bodies. Through ISO Technical Committees(TC), various International Standards are being carried out. Each member body interested in a subject for which a TC has been established has the right to be represented on that committee. ISO collaborates closely with the International Electro-technical Commission(IEC) on all matters of electro-technical standardization. ISO established the ISO 9000 Family standard in 1987, and International Standard ISO 9000-3 was worked by ISO/TC 176, Quality management and quality assurance, Subcommittee 2(SC 2), Quality systems, in accordance with the ISO/IEC Directives, Part 3: 1997 Rules for the structure and drafting of International Standards, Many organizations have applied the ISO 9000-3 for their quality system standard in the software sector. That means that ISO 9000-3: 1991 and ISO 9000-3: 1997 have been used successfully by the software industry as the internationally accepted interpretation of ISO 9001 for the development and maintenance of computer software. Additionally ISO 9000-3: 1997 involved how the software life cycle processes defined in ISO/IEC 12207: 1995, Information Technology - Software Life Cycle Processes related to the requirements of ISO 9001:1994. After having performed full reviews of the WD3, CD1, CD2 and DIS drafts of the future ISO 9001:2000, this document will partly replace the part of ISO 9000-3: 1997 for measurement analysis and improvement of quality management system in computer software industry, as an interpretation for organizations and certification bodies, which will be withdrawn when ISO 9001:1994 is replaced by ISO 9001:2000,.

• Journal of Radiation Protection and Research
• /
• 제33권1호
• /
• pp.1-12
• /
• 2008

최근 국제 표준은 글로벌 패권확보 수단으로, 또 국제 무역의 중요 수단으로 여겨질 정도로 중요성이 커지고 있다. 특히 표준과 규제정책을 연계하며 국제 표준의 구속력을 강화하고 있는 추세에 있어, 나라마다 국제표준 선점을 두고 치열한 경쟁을 벌이고 있다. 세계 각국은 점차 규격을 IEC에 부응하는 방향으로 바꾸고 있으며 국내에서는 원자력 분야의 국제전기위원회 (International Electrotechnical Commission)기술위원회인 TC45(Nuclear Instrumentation) 총회를 2005년에 유치하여 국제적 활동을 강화하고 있으며 수 년 전부터 IEC 규격을 적용한 국가규격으로 대체하고 있는 실정이다. 여기에서는 원자력 중장기사업의 일환으로 "방사선계측기 성능평가 기술개발" 연구를 수행하여 물리적 및 전자기적 환경에서의 성능평가 기술 및 방사선장특성 평가 기술 개발을 수행하였으며 IEC61526(Radiation protection instrumentation)의 규격을 적용하여 개발된 방사선 방호용 계측기의 성능평가 기술을 소개하고 이러한 성능시험에서 얻어진 결과를 분석하여 방사선계측기를 개발할 때 고려하여야 할 사항과 현재 국내에서 사용 중인 방사선계측기의 성능평가 결과를 분석하여 봄으로서 나타난 문제점 등을 토의하여 보았다.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.121-127
• /
• 2015

Recently, LVDC(Low Voltage Direct Current) has been came into the newly spotlight with HVDC(High Voltage Direct Current) and as increasing digital load, DC power supply and high quality of demand is also getting extended. In accordance with the report of EPRI(Electric Power Research Institute), they expect digital load will grow to 50% of whole load in 2020. Subsequently, the use of DC equipment will grow dramatically. Therefore, the careful adoption of LVDC standardization policy is urgently required for the safety of people, prevention of confusion and occupancy of the market.

• 신재생에너지
• /
• 제5권2호
• /
• pp.31-38
• /
• 2009

The performance test of a wind turbine in a wind farm is generally carried out by the owner to verify the power curve of the wind turbine given by the turbine manufacturer. The international electro-technical commission provides the IEC 61400-12-1 standard on "Power performance measurements of electricity producing wind turbines". By using this code, one can easily find the suitable met-mast (meteorological mast) location for the wind data whether a wind farm is potential or already built. In this paper, the valid sectors for wind turbines installed in the HanKyoung wind farm, south-west in Jeju island are analyzed on the basis of the code by considering the wind farm layout. Among these sectors, the optimal met-mast location is presented for the power curve verification of the wind farm.

• 한국전자통신학회논문지
• /
• 제10권4호
• /
• pp.513-519
• /
• 2015

정적분석방식은 소프트웨어 코드분석방식중의 하나이다. 국제철도신호시스템 소프트웨어 관련규격 IEC 62279에서는 소프트웨어 안전성 레벨에 따라 총 9가지 분석방법을 조합하여 사용할 것을 권고하고 있다. 본 논문에서는 도시철도 차 지상간 열차운행 정보 통신장치 연구개발에서 소프트웨어 품질을 향상하기 위하여 세 가지 정적분석방식에 대하여 연구하고, LDRA 툴을 이용하여 사례 연구를 진행하였다. 따라서 철도신호시스템 소프트웨어개발주기에 필요한 시간을 단축하여 안전성 관련 소프트웨어의 효율적인 개발에 도움을 주고자 한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.415-420
• /
• 2016

본 연구에서는 맘모그래피 장비에 대한 유지 보수에 대한 진단을 하는데 있어서 필수적인 정확성을 높이기 위해서 edge방법을 이용한, 유방영상의 물리적 특성에 대해서 알아보고자 한다. International electronical commission standard IEC: 61267의 RQA-M2 방법에 의해서 변조전달함수(modulation transfer function: MTF), 잡음전력스펙트럼(noise power spectrum: NPS), 양자검출효율(detective quantum efficiency: DQE)등을 측정하였다. 결과는 selenia demensions의 tomo장비와 lorad selenia는 맘모 전형장비의 MTF는 $10mm^{-1}$에서의 공간분해능을 유지하고 있었으며, NPS와 DQE는 낮은 nyquist frequency 포함하여 $6.0mm^{-1}$까지 나왔다. 따라서 정확한 진단을 위하여 주기적인 맘모시스템의 유지보수가 필요하며, 본 연구는 DDR 맘모시스템의 QA 및 수행성능 평가에 기초가 될 것으로 생각된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.906-915
• /
• 2016

In this study, a network monitoring system, including a secure 460-Network and a 460-Gateway, is designed and developed according with the requirements of the IEC (International Electro-Technical Commission) 61162-460 network standard for the safety and security of networks on board ships. At present, internal or external unauthorized access to or malicious attack on a ship's on board systems are possible threats to the safe operation of a ship's network. To secure the ship's network, a 460-Network was designed and implemented by using a 460-Switch, 460-Nodes, and a 460-Gateway that contains firewalls and a DMZ (Demilitarized Zone) with various application servers. In addition, a 460-firewall was used to block all traffic from unauthorized networks. 460-NMS (Network Monitoring System) is a network-monitoring software application that was developed by using an simple network management protocol (SNMP) SharpNet library with the .Net 4.5 framework and a backhand SQLite database management system, which is used to manage network information. 460-NMS receives network information from a 460-Switch by utilizing SNMP, SNMP Trap, and Syslog. 460-NMS monitors the 460-Network load, traffic flow, current network status, network failure, and unknown devices connected to the network. It notifies the network administrator via alarms, notifications, or warnings in case any network problem occurs. Once developed, 460-NMS was tested both in a laboratory environment and for a real ship network that had been installed by the manufacturer and was confirmed to comply with the IEC 61162-460 requirements. Network safety and security issues onboard ships could be solved by designing a secure 460-Network along with a 460-Gateway and by constantly monitoring the 460-Network according to the requirements of the IEC 61162-460 network standard.