• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.437-443
• /
• 2014

Electric motors and drives consume the largest amount of electricity more than 40% of global electricity consumption. In addition, motors, drives and its components are included in the global high-trade products and the main driving source for industrial equipment and house appliances. Thus, International standards and regulations for their safety and efficiency are internationally being discussed and created for the protection of its citizens and energy saving. So, understanding the international standards and the regulation of each country is essential to enhance overseas market and to develop product. In this paper, on the basis of this background, status and trends of international standards and regulations are introduced for safety and efficiency of motors and the drives. Safety and efficiency of the IEC (International Electrotechical Commission) standards are introduced in the emphasis. Also, regulations are studied about the differences and trends in each county.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.6
• /
• pp.127-134
• /
• 2004

As the result of reduction of the barrier of national economy on matters of quality assurance of weighing instruments in recently, it is considering in domestic as well as international matters. Therefore, this study is to analysis and compare with international md national measuring standards on the electric self-indicating scale, to improve the quality of electronic machine by providing a reformation plan on currently problems of domestic manufactured, and to identify to introduce in domestic criteria from international standards. I had compared KSC 1313 to OIML R 76-1 as the performance assessment items, such as metrology Properties test, static temperature test, temperature effect testing under the un-load, electronic wave disturbance test, high-tempereature and high-humidity stability test and durability test. Therefore, only one company is passed all items of the test according to the international (reference) standards, but it is possible to improve the quality in general if it should be use the load cell and electric components which is stability of temperature change in order to supplementation to the static temperature test and temperature effect testing under the un-load. It is also possible to apply in the domestic with the OIML 76-1 after correcting the design.

• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.35-43
• /
• 2008

This study analyzes the present state of disaster management system in Korea and the international standardization trend of disaster management systems in advanced nations. ISO has developed international disaster management standards in ISO/TC 223 Societal Security Technical Committee, and the advanced nations such as U.S.A., U.K. and Japan are in competition with each others to reflect their national disaster management standards in international standardization. Each disaster management organization in Korea separately carries on the disaster management standardization and activities because national standards for the disaster management is not established yet. The national standardization efforts for disaster management system have to be executed in Korea to raise efficiency in disaster management activities and to cope with the international standardization of disaster management.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.27-35
• /
• 2018

Purpose: The diverse users and the increase of power wheelchair users have made it difficult to apply the standards of Wheelchair user accessible toilet rooms for the existing law and BF-certification. To address these issues, the standards of the relevant laws have been improved (Ministry of Health and Welfare, 2018), but there are still many problems. In this study, problems with the standards for Wheelchair user accessible toilet rooms in Korea are analyzed by comparing national and international standards. In addition, improvements to standards for Wheelchair user accessible toilet rooms will be suggested. Method: It presents improvement for standards of Wheelchair user accessible toilet rooms by comparing national, international standard and standards of many countries. Korean standard, International Standard(ISO 21542), American Standard(ADA Standards), German Standard(DIN 18040-1), Austrian Standard($\ddot{O}NORM$ B 1600) and Swiss Standard(Norm SIA 500) were investigated and analyzed. Results: Korea's standards differ from the ISO and the Standards of other countries in many ways, so there is a need for realignment. Specifications for disabled toilets and clear criteria for the size, shape, and location of sanitary appliances in toilets that are practically available to wheelchair users should be provided. Considering the increasing number of disabled toilet users, the installation of various disabled toilet rooms should be considered considering the user characteristics of those who can walk and wheelchair users. Implication: Recent partial improvements to relevant laws cannot meet the requirements of various users. Therefore, comprehensive and clear standard should be presented that take into account changing society and the environment.

• Journal of Arbitration Studies
• /
• v.25 no.1
• /
• pp.65-86
• /
• 2015

Under current international investment law clear criteria to determine standards of indirect expropriation are absent. Arbitral tribunals determine on a case-by-case whether an indirect expropriation has occurred by conducting a fact-based inquiry. However, three common determination standards can be inferred by analyzing prior arbitration cases. The appropriate analytical framework that can be applied to determine whether a state's measure constitutes an indirect expropriation is as follows. i) the degree of economic invasion of the state's action into the foreign investor's property rights and durability of the period, ii) interference with the foreign investor's distinct and reasonable investment-backed expectations, and iii) the nature, purpose and character of the state's measure. Therefore, it is necessary to fully acknowledge and to utilize strategically this determination standard. However, derived standards cannot be applied to all disputes en masse. So, it is desirable to exclude ambiguity and to clearly define the determination standard of indirect expropriation in investment agreements, since arbitral tribunals can apply different determination standards on a case-by-case basis. And, based on the discussions until now, more developed standards and direction in response to demand should be established through consistent analysis and review of precedents related to indirect expropriation. Lastly, This study is expected to be a useful guideline to prepare a necessary countermeasure to prevent dispute related to indirect expropriation beforehand or in case of dispute occurrence.

• Journal of Radiation Protection and Research
• /
• v.10 no.2
• /
• pp.130-136
• /
• 1985

The activity measurement of a solution of $^{133}Ba$ which is an electron capture nuclide was carried out by the ${\beta}-{\gamma}$ coincidence method. The counting rates at the ${\beta}-,\;{\gamma}-$, and coincidence-channels were measured using a $4{\pi}$ proportional counter and two NaI(Tl) scintillation detectors. The specific activity of the solution calculated by the efficiency extrapolation was $(1151.01{\pm}2.99)kBqg^{-1}$ at the reference time(00h UT, 03-15-84). According to an international comparison of activity measurements organized by the Bureau International des Poids et Mesures, this result showed the difference of 0.94% to the mean value derived from the comparison.

• Fashion & Textile Research Journal
• /
• v.25 no.3
• /
• pp.398-408
• /
• 2023

Smart clothing products can experience a decrease in performance and reliability due to various mechanical, biological, and chemical stress factors that occur throughout their life cycle. These issues can hinder consumer acceptance of the products. This study aims to enhance the reliability of smart clothing and facilitate quality control by analyzing and identifying the current status of international standardization for smart clothing and electronic textiles (e-textiles). The focus of this analysis was on the durability test methods in the use environment. Furthermore, similar standards published by different standardization organizations for durability tests were compared in depth. The study showed that a total of 27 international standards have been developed or are currently under development. The current standardization efforts mainly aim to develop functionality and durability test methods for smart clothing and e-textile products. A detailed comparison was made between two international standards (IEC 63023-204-1:2023 and AATCC TM210:2019) specifically in relation to the washing durability test method and the electrical resistance measurement standards (BS EN 16812:2016 vs AATCC EP13-2021), before and after the environmental exposure tests. Based on this comparison, several suggestions have been made and discussed for the future revision of these international standards.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.4
• /
• pp.71-79
• /
• 2019

Purpose: The manoeuvring space at doors must be secured for users of walking aids, wheelchair users, stroller users, luggage carriers, etc., so clear criteria must be established. The korean standards for the manoeuvring space at doors need to be improved to present clear criteria depending on the type of entrance and the direction of opening and closing. Method: Korean standard, International Standard(ISO 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(OENORM B 1600, 2017) and Swiss Standard(Norm SIA 500, 2009) were investigated and analyzed. A comprehensive improvement of the criteria for the manoeuvring space at doors is proposed. Results: The manoeuvring space at doors, which is essential for the disabled to use the door, shall be installed with a comprehensive consideration of the width of doors, the Circulation space, the direction of access, and the method of opening and closing of the door. Korean standards, such as the width of doors, the Circulation space, and the manoeuvring space at doors, are different from international and international standards, which require improvement of standards. The criteria for the manoeuvring space at doors shall be clearly improved so as not to be misinterpreted during the installation of doors and the BF-certification. Implication: The criteria for the installation of doors shall be presented as a comprehensive alternative through continued study of details. In addition, improvements in standards that reflect changes in international standards should be made.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.115-121
• /
• 2019

The purpose of this study is to establish the training standards for HF of aviation maintenance reflecting the growing relevance of aviation maintenance technicians' ability to perform their work for the safety and efficiency of airline operation. For this purpose, previous studies on the concept of human factors were examined, and the HF training standards of the advanced international aviation bureaus such as the International Civil Aviation Organization(ICAO), Federal Aviation Administration(FAA) and European Aviation Safety Agency(EASA) were compared with the operational technical standards of Korea Aviation Safety Law. In addition, the actual status of human factors education and training were examined for Korea's two full service carriers (FSC) and four of the low cost carriers (LCC). The study results revealed that Korea's human factors education and training standards were weak compared with international standards, and that most airlines were not able to systematically implement human factors education and training. These results complement the existing problem of training standards for aviation maintenance human factors in Korea and support the development of a standard model of the training course for aviation maintenance human factors which meets international standards.

• Journal of the Korean Institute of Educational Facilities
• /
• v.23 no.1
• /
• pp.13-22
• /
• 2016

Recently, Korea has been established and operated International Schools manifesting to improve the nation's capacity of the foreign languages skill and to cultivate internationally trained professional manpower. In order to achieve the vision of a world-class educational organization, it has to be designed for the facility standards to meet the international accreditation standards. Therefore, the main purpose of this study is to research about basic resources through comparison of facility conditions between public schools in Korea and international accredited schools. By comparing those two different plan drawings are found the following things. First, Schools which established with International Accreditation Standard are prepared detailed criteria for the facility, Furthermore information about the furnishings included, in addition to specific equipments for classes are stated to be prepared. Secondly, it is more effective when special classrooms such as music and science are equipped with various spatial elements, enough educational equipment storage, teacher's study rooms, practical training rooms and student's activity rooms to support various teaching programs and learning efficiently. Lastly, there was a clear tendency that not only hardware but also software standards for the audiovisual room and library have been more enhanced to enable multidisciplinary educational approaches with the recent education training trend.