• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1806-1813
• /
• 2010

In this paper, we investigate the development process of the quality assurance system ISO9001 in the railway industry and ISO/TS 16949 the quality system in the automotive industry. We study the international standard IRIS(International Railway Industry Standard) & TSI(Technical Specification for Interoperability) applied in railway industry. Throughout studying for the whole development process of the Rolling Stock Quality System, we are to review the necessity of the monitoring process and assesment process applied in IRIS & TSI guidelines. It will be the keystone enhancing our quality level to global level in railway industry.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.146-173
• /
• 1998

It is one of the most important factors Seafarers Education Quality Assurance and management in Higher Maritime Education Institution. The educational process and result of Higher Maritime Educational Institution. The educational process and result of Higher Maritime Educational Institution should be evaluated according to the 1995 Amendments to the International Convention on Standards of Training Certification and Watchkddping for Seafares(STCW) 1978. Actuall above-mentioned evaluation is deemed to make foundation in order to enhance the efficiency of shipboard education by surveying the satisfaction of shipboard training for Marine Engineering part cadets by the group. In this paper we carried out the questionnaire survey to study stisfactory value and the reason of dissatisfaction of 89 cadets being trained on board the Training Ship in Maritime College of Korea Maritime University The results were calculated by frequency and percentage; the significance of difference among Department groups like Marine Engineering Maritime polic and Ship Operating Systems Engineering Engineering was analysed by $x^2$ inspection.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.102-108
• /
• 2015

According to various researches, one of main causes of flight accidents is influence of human factors. It is important to collect and analyze event data in advance to minimize and prevent human errors by developing safety checklist. As a result international aviation industry developed Flight Operations Quality Assurance for commercial airliners, and, upon its proven effectiveness, it is now highly recommended to adopt for helicopter operations. Consequently, S government organization instituted Helicopter Flight Operations Quality Assurance system in 2012. Hence, this study conducted regression analysis of S organization's flight event frequency and applied ICAO SMS Matrix to categorize the severity of the events according to international standards. Based on the analysis, this research derived fundamental checklist factors for helicopter, which can be a proactive measure for safe operation.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.127-134
• /
• 2004

As the result of reduction of the barrier of national economy on matters of quality assurance of weighing instruments in recently, it is considering in domestic as well as international matters. Therefore, this study is to analysis and compare with international md national measuring standards on the electric self-indicating scale, to improve the quality of electronic machine by providing a reformation plan on currently problems of domestic manufactured, and to identify to introduce in domestic criteria from international standards. I had compared KSC 1313 to OIML R 76-1 as the performance assessment items, such as metrology Properties test, static temperature test, temperature effect testing under the un-load, electronic wave disturbance test, high-tempereature and high-humidity stability test and durability test. Therefore, only one company is passed all items of the test according to the international (reference) standards, but it is possible to improve the quality in general if it should be use the load cell and electric components which is stability of temperature change in order to supplementation to the static temperature test and temperature effect testing under the un-load. It is also possible to apply in the domestic with the OIML 76-1 after correcting the design.

• 한국방사선학회논문지
• /
• 제8권3호
• /
• pp.105-110
• /
• 2014

국내 진단용 방사선 발생장치는 3년 주기로 시행되는 정기적인 정도관리 검사에 앞서 일별, 주별, 월별, 분기 반기별로 시행하는 수시 정도 관리에 대한 항목 및 규정이 명확하게 지정되어 있지 않다. 미국과 유럽 등의 선진국에서는 정도 관리 항목에 대해 검사를 수행하는 검사자를 구분하여 국가 기관에 보고하도록 되어 있으므로 체계적인 검사 수행과 더불어 검토가 가능하다. 그러므로 의료 장비의 현대화가 이루어지는 시점에서 국외의 주기별 정도관리 시스템을 국내 진단용 방사선 발생 장치에 적합하도록 도입하여 정도관리 항목과 기준의 재정립이 반드시 필요하다. 이에 본 논문에서는 진단용 방사선 발생장치 중 가장 빈번히 사용되고 있는 일반 X선 촬영 장치의 3년 정기점검 사이에 주기적인 수시 정도 관리 검사 항목과 방법 및 기준 수립을 위해 미국, 캐나다 등의 국외 문헌 조사 및 국제 전자 기술 위원회(International Electro-technical Commission, IEC)의 규정 항목과 비교하였다. 이를 바탕으로 국내 수시 정도관리 항목 신설 시 필요한 검사 항목 및 기준 설정을 위한 기초 자료로 제시하고자 하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권9호
• /
• pp.4313-4318
• /
• 2016

Background: This study documented the performance of providers of visual inspection with acetic acid (VIA) at primary health centers, assessing their compliance with the VIA skills checklist and determinants of non-compliance, and exploring their perceptions of VIA training sessions. Materials and Methods: A cross-sectional study was conducted among VIA providers in the $Mekn\grave{e}s$-Tafilalet region of Morocco. Structured observation of their performance was conducted through supervisory visits and multiple focus group discussions (FGDs). Results: Performance of all the recommended steps for effective communication was observed in a low proportion of procedures (36.4%). Midwives/nurses had higher compliance than general practitioners (GPs) (p<0.001). All recommended steps for VIA examination were performed for a high proportion of procedures (82.5%). Compliance was higher among midwives/nurses than among GPs (p<0.001) and among providers in rural areas than those in urban areas (p<0.001). For pre-VIA counselling, all recommended steps were performed for only 36.8% of procedures. For post-VIA counseling, all recommended steps were performed in a high proportion (85.5% for VIA-negative and 85.1% for VIA-positive women). Midwives/nurses had higher compliance than GPs when advising VIA-positive women (p=0.009). All infection prevention practices were followed for only 14.2% of procedures, and compliance was higher among providers in rural areas than those in urban areas (p<0.001). Most FGD participants were satisfied with the content of VIA training sessions. However, they suggested periodic refresher training and supportive supervision. Conclusions: Quality assurance of a cervical cancer screening program is a key element to ensure that the providers perform VIA correctly and confidently.

• 의학교육논단
• /
• 제15권1호
• /
• pp.1-8
• /
• 2013

Outcome-Based education (OBE) is reviewed from the institutional perspective. The demand for and international trends in OBE are briefly examined and several term related to OBE, especially educational objective and program outcomes (POs), are introduced. It is stressed that systems for continuous quality improvement and quality assurance should be established to ensure the maintenance of the OBE system. Because the criteria for accreditation contain a criterion regarding the quality assurance related to program outcomes, several critical issues are considered regarding the POs themselves and the reduction of the POs. The core value of OBE is not only to provide appropriate education services to students to prepare them with the minimum skills and abilities for advancing their professional service, but also to guarantee the quality of graduates. In addition, the educational program should be continuously improved by employing the evaluation results acquired during the operation of the OBE systems. It is certain that an OBE system is one important aspect of student-centered education.

• 농약과학회지
• /
• 제15권4호
• /
• pp.529-544
• /
• 2011

분석표준화 관련 국제기관인 ISO, CIPAC 등은 농약제품 시험기관에 대한 정도관리(QC), 숙련도 시험 및 분석법 검증을 수행하기 위한 요구조건을 지침서로 제시하고 있다. 일반적으로, 숙련도 시험은 시험기관의 분석능력 평가를 위하여 시험기관간 비교시험을 바탕으로 시험기관의 수행능력과 기술능력 정도를 판단할 수 있다. 분석법 검증 절차는 정도관리(QC)에서 중요한 단계 중 하나로 특이성, 선택성, 직선성 등의 항목들이 포함되며, 대부분의 국제기관이 농약제품 중 주요성분에 대한 정량분석법에서 재현성, 정확성 및 정밀성 등을 요구하고 있다. 본 연구에서는 농약 이화학시험 분석기관의 시험연구과정 및 결과에 대한 신뢰성을 높이기 위해 국내 외 정도관리에 관한 지침서를 비교 검토하여 국제적으로 표준화된 지침서에 적합한 구체적이고, 효율적인 농약 이화학시험 분석기관의 농약분석법 검증절차 및 시험기관 정도관리 체계(안)를 제안하고자 한다.

• 대한디지털의료영상학회논문지
• /
• 제9권1호
• /
• pp.53-65
• /
• 2007

PACS has been run at the Kyung Hee University Medical Center(KHMC) since 2001, and the installation and operation of PACS have contributed to automation and quantification of KHMC's medical environment During these five years our greatest concern is how to make our own guiding principle of diagnostic monitor QA which is adapted to international standards. In accordance with the terms of 'KHMC QA Guideline', 'AAPM TG18', 'SMPTE RP133', 'DICOM Part14', 'DIN V 6868-57', 'JESRA X-0093', 'JIS Z4752-2-5' and 'KCARE', concern about quality assurance of medical images are on the increase. With the investigation of acceptance testing and quality control of international standards for medical display devices, and data collection and analysis for recommended guideline, it is reported that acceptance testing(quality control), including geometrical distortion, display reflection, luminance response, luminance uniformity, display resolution, display noise, veiling glare and color chromaticity being adequate and effective to domestic hospital environments for medical display devices and assessment methods according to each performance. Accordingly, KHMC classified the checkpoint items by period, at the time of monitor setting, monthly, quarterly, half-yearly and annually. Periodic classification of checkpoint items for monitor QA makes a good guideline for image QA/QC and useful guideline for persistent good quality of monitor.

• Wind and Structures
• /
• 제8권4호
• /
• pp.269-281
• /
• 2005

The paper describes the work of the IAWE Working Group WGF - Extreme Wind Prediction and Zoning, one of the international codification working groups set up in 2000. The topics covered are: the international database of extreme winds, quality assurance and data quality, averaging times, return periods, probability distributions and fitting methods, mixed wind climates, directionality effects, the influence of orography, rare events and simulation methods, long-term climate change, and zoning and mapping. Recommendations are given to promote the future alignment of international codes and standards for wind loading.