• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.613-621
• /
• 2018

The electrically assisted brazing of a ferritic stainless steel with nickel-based filler metal is experimentally investigated. During electrically assisted brazing of a lap joint, the temperature of the joint is first rapidly increased to a brazing temperature and held nearly constant for a specific period using a pulsed electric current. Microstructural analysis results strongly suggest that the electric current during electrically assisted brazing enhances diffusion between the filler metal and the ferritic stainless steel, thus inducing significantly thicker diffusion zones compared with induction brazing. The mechanical test results show that the strength of the electrically assisted brazing joint is comparable to or even superior to those of the joint fabricated by induction brazing, while the process time of the electrically assisted brazing is significantly shorter than that of induction brazing.

• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.26-31
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired fer car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. In the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6NO 1 alloy welds. Aluminum alloy plate of 2.Omm in thickness with filler metal bar was welded by twin beam Nd: YAG laser facility (total power: 5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 1/min was used. The defocusing distance is kept at 0 mm. At travel speeds off 3 to 9 and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• International Journal of Advanced Culture Technology
• /
• 제8권2호
• /
• pp.28-33
• /
• 2020

The Chemist Antoine-Laurent Lavoisier and mathematician Pierre Simon Laplace, who conducted a collaborative research on heat phenomena, are two of the key figures that represent French scientific community in the late 18th century. They joined hands together to understand heat phenomena that had not been fully explained until that time. They studied heat phenomena based on a heat particle model called 'caloric' and this study further expanded into light, magnetism and electricity, laying groundwork for many other research achievements afterwards. This article goes through their individual researches and looks into the process of their joint research based on the analysis of their publications. Further to these, it emphasizes its continuity with the Laplacian Program, a large-scale research project conducted in the early 19th century. Lastly, this article presents how science can merge with history, and at the same time, introduces the prerequisites for successful convergence research through existing research cases.

• 한국도로학회논문집
• /
• 제13권1호
• /
• pp.223-228
• /
• 2011

본 논문에서는 포스트텐션 콘크리트 포장(PTCP: Post-Tensioned Concrete Pavement)과 줄눈 콘크리트 포장(JCP: Jointed Concrete Pavement)이 접속되는 터미널 조인트의 시공시 초기 줄눈 폭 설계에 대하여 연구하였다. PTCP와 JCP 사이의 줄눈 폭은 소음과 승차감에 직접 영향을 미치는 요소이다. 초기 설계 줄눈 폭이 지나치게 크면 소음과 승차감을 저하시키고, 줄눈 폭이 지나치게 작게 되면 온도 상승시 슬래브의 팽창과 블로우업 발생으로 압축응력이 과도하게 작용하여 줄눈부 파손을 야기할 수 있기 때문이다. 본 연구는 온도변화에 따른 터미널조인트의 줄눈 폭의 연구를 위하여 PTCP와 JCP가 시공된 동해고속도로 주문진현장에서 2010년 8월과 11월에 줄눈 폭 데이터를 측정하고 분석하여 최적의 줄눈 폭 설계방안을 제시하였다.

• 한국인터넷방송통신학회논문지
• /
• 제20권4호
• /
• pp.23-33
• /
• 2020

본 연구는 현재 한국 콘텐츠 업계가 처한 국내외 환경하에서 우리가 전략적으로 융합해야 할 시장인 아세안 시장에서의 한-아세안 공동 제작 융합 방안을 모색하는 데 목적을 두어 실시되었다. 연구 목적을 달성하기 위한 연구 내용은 아세안 5개국 방송 프로그램 시청자를 대상으로, 조사 방법은 사례 조사 분석 연구를 실시하였다. 첫째, 2018년도 상반기 중 아세안 5개국의 한국 콘텐츠 방영 현황, 둘째, 아세안 5개국의 한국 방송 프로그램에 대한 이용 및 인식 현황, 셋째, 아세안 5개국의 방송 프로그램 공동 제작에 대한 이용 및 인식 현황, 넷째, 한국과의 공동 제작 방송 프로그램에 대한 이용 및 인식 현황, 마지막으로 아세안 5개국 내 한국과의 국제 공동 제작 사례를 분석하였다. 이상을 통해, 본 연구에서는 한-아세안 공동 제작은 현재 한국 콘텐츠 업계가 처한 국내외 환경하에서 전략적으로 융합해야 할 것을 제안하였다는 데 가치가 있다.

• 국제물리치료학회지
• /
• 제12권1호
• /
• pp.2279-2285
• /
• 2021

Background: The spinal nerves, which start at the lumbar level, are connected to the nerve innervation in the knees. Currently, there is a lack of research on the treatment of knee pain through lumbar mobilization. Objectives: To investigate the effects of lumbar joint mobilization (LJM) and transcutaneous electronic nerve stimulation (TENS) on proprioception and muscular strength in volleyball players with chronic knee pain. Design: Two group pre-posttest. Methods: A total of 26 professional volleyball players with chronic knee pain were allocated to the LJM (n=13) and TENS (n=13) groups. In the LJM group, grade III - IV amplitude was applied 3 times for 1 minute (80 times per minute) at the affected lumbar (L2-3) facet joint in the prone position. In the TENS group, the TENS treatment device was used to directly apply or 15 minutes to the area of chronic knee pain (100 Hz, 150 ㎲). Proprioception was measured by knee flexion and extension angles, and muscle strength was evaluated using an isokinetic test. Measurements were taken before and after interventions. Results: In the eye opened conditiond, proprioception significantly increased during both knee extension and flexion after LJM, while only knee extension was significantly increased in the TENS group. There was also a significant difference in knee extension between the two groups. In the eye close conditiond, proprioception was significantly improved only during knee extension in the LJM group, and the difference in knee extension between the groups was also significant (P<.05). The maximum torque of the affected knee joint was significantly improved at 60°/sec in both groups (P<.05); however, there was no difference between the two groups. There was no significant difference in the maximum flexion torque within or between the groups. Conclusion: This study suggests that LJM improved proprioception and muscular strength in volleyball players with chronic knee pain.

• STI Policy Review
• /
• 제7권2호
• /
• pp.106-131
• /
• 2016

The general purpose of this paper is to identify opportunities for and to measure existing collaboration on research and development between institutions from the countries of Asia and Latin America in FEALAC's framework, in the fields of biotechnology and nanotechnology and their convergence. The methodological approach includes scientific and technological surveillance and research seeking to identify both the R&D and innovation capacities of the countries as well as the degree of international cooperation between countries of the two regions; case studies and a study of the governance framework of international collaboration in R&D about issues considered global challenges. The study has three main findings. First, nanotechnology, biotechnology and their convergence contribute to solving the problem of contamination by heavy metals affecting most of the countries that are part of FEALAC and to address problems arising from the accelerated rate of energy consumption, which also contributes to environmental damage. In this scenario, important business opportunities arise from the adaptation and development of bio-refinery technologies. Second, the scientific relationship between FEALAC countries, mainly between Asian and Latin American countries, is weak as can be seen in research for articles and patents. But there is plenty of room and potential for improvement. Third, current and upcoming joint R&D programs and projects should be linked both to existing governance structures and to new ones that serve as experiments of STI public policy regarding innovative management of intellectual property and capacity building. Practical implications are included in lessons learned and a set of recommendations involving a couple of proposals. One proposal calls for research and innovation in promising fields for international cooperation. Another proposal creates mechanisms in the governance framework for sharing knowledge, capacity building, and funding.

• Journal of Microbiology and Biotechnology
• /
• 제15권6호
• /
• pp.1280-1285
• /
• 2005

Using the nodY::lacZ fusion system in Bradyrhizobium japonicum USDA 110, 22 flavonoids, which have structurally different features, were tested to define the role of the substituted functional groups as an inducer or inhibitor for the nod gene expression. A functional ,group of 4'-OH on the B-ring and the double bond between 2-C and 3-C on the C ring were required to induce the nod gene expression in B. japonicum USDA 110. In the case of isoflavones, the 4'-methoxyl group, which blocks the open 4'-OH functional group, did not significantly lower inducing activity, as compared with isoflavones with 4'-OH. However, all flavonols tested, which have a 3-OH functional group on the C-ring, did not induce, but inhibited the nod gene expression. Flavone, 7-hydroxyflavone, and kaempferol (5,7,4'-trihydroxyflavonol) at $1\;{\mu}M$ concentration significantly inhibited the nod gene expression induced by 7,4'-dihydroxyflavone. However, 7-hydroxy-4'-methoxyflavone at $1\;{\mu}M$ concentration showed a synergistic effect with genistein and 7,4'-dihydroxyflavone on the induction activity.

• 국제물리치료학회지
• /
• 제3권1호
• /
• pp.364-369
• /
• 2012

The purpose of this study was to analyze lower limb muscle activity and 3D motion analysis according to change foot arch height during walking. We selected 9 young and healthy people who have been normal foot. And we selected 7 young and healthy people who have been flatfoot. So, people were divided into 2 groups and walked platform during 2 minutes twice for checked by 3D motion analysis. These data were characterized by EMG measurements of three muscles( tibialis anterior, medial and lateral gastrocnemius) while they were walking. The collected data were analyzed by Independent t test using the SPSS statistics program(Ver 12.0). In foot arch change, there were no significant difference in three muscles 3D motion analysis also found that there were no significant difference in joint angles. In this study was to analyze lower limb muscle activity and 3D motion analysis according to change foot arch, but there were no significant difference in 6 muscles neither joint angles.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4835-4855
• /
• 2018

In this paper, we study the sparse signal recovery that uses information of both support and amplitude of the sparse signal. A convergent iterative algorithm for sparse signal recovery is developed using Majorization-Minimization-based Non-convex Optimization (MM-NcO). Furthermore, it is shown that, typically, the sparse signals that are recovered using the proposed iterative algorithm are not globally optimal and the performance of the iterative algorithm depends on the initial point. Therefore, a modified MM-NcO-based iterative algorithm is developed that uses prior information of both support and amplitude of the sparse signal to enhance recovery performance. Finally, the modified MM-NcO-based iterative algorithm is used to estimate the time-varying sparse wireless channels with temporal correlation. The numerical results show that the new algorithm performs better than related algorithms.