• Applied Biological Chemistry
• /
• v.32 no.1
• /
• pp.8-13
• /
• 1989

The rate constant and reaction order of the autoxidation of methyl linolenate were determined by using nuclear magnetic resonance spectrometer, and the applicability of nmr to the kinetic study was examined. The autoxidation was carried out under a mild condition, i.e., the air flow rate of 90m1/min and room temperature. The autoxidation of methyl linolenate followed the first-order kinetics, and the rate constant was found to be $1.96{\times}10^{-2}hr^{-1}$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.4
• /
• pp.548-555
• /
• 2019

Objective: The main objective of this study was to evaluate the effect of different feeding levels of a total mixed ration silage-based diet on feed intake, total tract digestion, enteric methane emissions, and energy partitioning in two beef cattle genotypes. Methods: Six mature bulls (three Thai natives, and three Thai natives - Charolais crossbreeds) were assigned in a replicated $3{\times}3$ Latin square design, with cattle breed genotype in separate squares, three periods of 21 days, and three energy feeding above maintenance levels (1.1, 1.5, and 2.0 MEm, where MEm is metabolizable energy requirement for maintenance). Bulls were placed in a metabolic cage equipped with a ventilated head box respiration system to evaluate digestibility, record respiration gases, and determine energy balance. Results: Increasing the feeding level had no significant effect on digestibility but drastically reduced the enteric methane emission rate (p<0.05). Increasing the feeding level also significantly increased the energy retention and utilization efficiency (p<0.01). The Thai native cattle had greater enteric methane emission rate, digestibility, and energy utilization efficiency than the Charolais crossbred cattle (p<0.05). The daily metabolizable energy requirement for maintenance in Thai native cattle ($388kJ/kg\;BW^{0.75}$, where $BW^{0.75}$ is metabolic body weight) was 15% less than that in Charolais crossbred cattle ($444kJ/kg\;BW^{0.75}$). Conclusion: Our results suggested that the greater feeding level in zebu beef cattle fed above maintenance levels resulted in improved energy retention and utilization efficiency because of the reduction in enteric methane energy loss. The results also indicated higher efficiency of metabolisable energy utilization for growth and a lower energy requirement for maintenance in Bos indicus than in Bos taurus.

• Electronics and Telecommunications Trends
• /
• v.36 no.1
• /
• pp.54-63
• /
• 2021

Since the recent COVID-19 pandemic, countries have been strengthening trade protection for their security, and the importance of securing strategic materials, such as food, is drawing attention. In addition to the cultural aspects, the global preference for food produced in Korea is increasing because of the Korean Wave. Thus, the Korean food industry can be developed into a high-value-added export food industry. Currently, Korea has a low self-sufficiency rate for foodstuffs apart from rice. Korea also suffers from problems arising from population decline, aging, rapid climate change, and various animal and plant diseases. It is necessary to develop technologies that can overcome the production structures highly dependent on the outside world of food and foster them into export-type system industries. The global agricultural industry-related technologies are actively being modified via data accumulation, e.g., environmental data, production information, and distribution and consumption information in climate and production facilities, and by actively expanding the introduction of the latest information and communication technologies such as big data and artificial intelligence. However, long-term research and investment should precede the field of living organisms. Compared to other industries, it is necessary to overcome poor production and labor environment investment efficiency in the food industry with respect to the production cost, equipment postmanagement, development tailored to the eye level of field workers, and service models suitable for production facilities of various sizes. This paper discusses the flow of domestic and international technologies that form the core issues of the site centered on the 4th Industrial Revolution in the field of agriculture, livestock, and fisheries. It also explains the environmental awareness production technologies centered on sustainable intelligence platforms that link climate change responses, optimization of energy costs, and mass production for unmanned production, distribution, and consumption using the unstructured data obtained based on detection and growth measurement data.

• Korean Journal of Plant Resources
• /
• v.36 no.3
• /
• pp.225-236
• /
• 2023

Stomatal traits such as stomata density (SD), aperture length (APL) and width (APW), guard cell length (GCL) and width (GCW), and distance between stomata (DIS) were investigated to identify correlation with agronomic traits for 35 Korean wheat cultivars. Flag leaf width (FLW) of Korean wheat cultivars was the widest in Ol-mil, and the narrowest in Keumkang. SD tended to be higher on the adaxial side than on the abaxial side in Korean wheat cultivars. SD of adaxial and abaxial sides was classified into a cultivar with a significantly different or not. In APL, 18 wheat cultivars showed significant differences according to leaf side, and APL of adaxial was longer than APL of abaxial in 13 wheat cultivars. In APW, 15 wheat cultivars showed a significant difference, and APW of abaxial was wider than APW of adaxial among them. In GCL, 14 wheat cultivars showed a significant difference, and the GCL of abaxial was longer than the GCL of adaxial in 10 wheat cultivars. In GCW, 10 wheat cultivars showed a significant difference, GCW of adaxial was wider than GCW of abaxial and in 6 wheat cultivars. FLW of adaxial and abaxial showed a negative correlation with GCL and a positive correlation with grain number per panicle. FLW of only abaxial showed a positive correlation with DIS. The SD of the adaxial showed a negative correlation with GCL, while the SD of the abaxial showed a negative correlation with APL. APL of both sides of the leaf showed a positive correlation with GCL, and APW of only abaxial showed a negative correlation with GLC. DIS of adaxial showed a negative correlation with tiller number (TN), while DIS of abaxial showed a positive correlation with GNP.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.3
• /
• pp.216-223
• /
• 2023

This study aimed to identify and compare the characteristics of Elymus humidus on common wheat (Triticum aestivum L. cv. Chinse Spring, CS). The seed length, width, height, and weight of E. humidus were smaller than those of the CS. In particular, the germination rate of E. humidus was substantially lower than that of CS. In the anatomical dissection of the leaf, E. humidus showed a considerably different xylem diameter of the main vascular bundle in the main vein; however, there was no difference in the phloem of the main vascular bundle compared with the xylem and phloem of the main vascular bundle in the main vein of CS, although E. humidus showed a leaf structure similar to that of CS. In addition, E. humidus had a thinner epidermis than that of CS. Regarding stomatal traits, E. humidus showed a graminoid stomata type similar to that of CS. On the adaxial and abaxial sides, the density, length, and width of the stomata in E. humidus were smaller than those in CS, whereas the distance between stomata in E. humidus was greater than that in CS. The chromosomes of E. humidus were classified as long and short based on their respective lengths. Long chromosomes were classified based on the ratio of the long arm to the short arm e.g., 1:1 or 2:1. Short chromosomes showed the same trend and some short chromosomes were microsatellites. To evaluate genetic diversity, 38 barley EST markers with polymorphisms between E. humidus and CS were selected from 236 barley EST markers.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.2
• /
• pp.79-89
• /
• 2023

This paper is about the development results of an automatic silkworm breeding system to reduce labor and time by automatically performing the works for silkworm droppings changing and feed its food. It consists of an automatic guided vehicle and a processing unit. The automatic guided vehicle transports a silkworm dropping changing frame mounted on a silkworm tray stand, and the processing unit takes over the dropping changing frame on it, removes excrement contained the droppings changing frame and feeds silkworm food. In the case of the current silkworm farming, because the breeding period for large silkworms (4 to 5 stage) is short to 14 days and the supply of mulberry leaves takes 98% of the total amount of mulberry leaves needed for breeding silkworms at this time, labor concentration is intensive, and all breeding works depends on manpower. Therefore, it was difficult to breed large silkworms on a large scale. Moreover, silkworms are bred by adding Silkworm bed (Seop) and mulberry in the silkworm tray, and their droppings changing is to separate silkworms and excrement by moving silkworm trays one by one, and the production cost increases due to the high-cost manpower for silkworm breeding. To solve this problem, technology for automating silkworm breeding has also been developed. However, there is still a limitation that silkworm feeding and droppings changing works are not suitable for mass breeding because a lot of labor and time are spent depending on manual work. Therefore, a new silkworm breeding system for breeding silkworm automatically is needed and so we developed an Automatic Silkworm Breeding System applying the droppings change frame, the inverting unit, the feeding silkworm food device and automatic guided vehicle.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.325-335
• /
• 1985

Biogas production from agricultural wastes were summarized as follows: 1. Biogas Generation Characteristics of Various Manures and Residues a. Gas yield from crop residues like rice straw, rice hull, corn stalk and coconut husk can be improved by addition of animal manures. b. Gas yield from coconut husk can be improved through aerobic fermentation for at least one week before loading in the digester. c. Gas yield from fresh rice straw is better than from pre-fermented one, whether alone or in combination with animal manures. d. Initial study has shown that fresh azolla can be substituted for animal manures in manurerice straw combinations and gas yield derived based on unit volatile solids loaded is actually better than for manure-residue combinations. e. Gas production is highly sensitive to substrate pH and becomes almost nil at a pH of below 6. 2. Effect of ambient conditions and other factors on biogas production in a house hold-size digester. a. Results showed that compaction of rice straw in straw-manure combination can reduce gas yield compared with loosely mixed straw. b. The effective gas production period extended to 70 days using freshly threshed rice straw and fresh cattle manure as feed material. c. Underground and above ground digesters with shade have relatively more stable substrate temperature than aboveground exposed digesters. This relative temperature instability may likely be the reason for lower gas yield for the exposed aboveground digester loaded with loose straw-cattle manure substrate, compared with the underground digester with the same substrate. 3. Economic Analysis a. Based on prevailing costs of fuel, materials, and labor in the Philippines, biogas produced from the household size system is cheaper than either LPG or kerosene. b. If other benefits like organic fertilizer, pollution control and convenience are considered, biogas will surely be the best alternative fuel source.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.16-22
• /
• 2021

This experiment was conducted to study on the growth characteristics and seed productivity of Italian ryegrass (Lolium multiflorum Lam., IRG) planted in the Spring in Gangwon Highland according to the seeding distance (20, 30 and 40 cm). The field was located in highland around 600 m above sea level. The experimental design was randomized block design with three replication and the tested IRG variety was 'Greencall' developed by National Institute of Animal Science (NIAS). IRG was sown on March 26, 2020, and harvested on July 2. The plant height was the shortest at 80.5 cm in the 40 cm seeding distance plot (P<0.05), and there was no significant difference between the 20 and 30 cm seeding distance. The number of spike per square meter (㎡) was significantly higher in the 20 cm seeding distance plot than that of 40 cm (937 vs. 571). The dry matter (DM) content of seed and straw after harvesting was 49.70 and 33.36 % on average, and there was no significant difference between treatments (P>005). However, there was a significant difference in the fresh and DM yield of seeds and straw (P<0.05). DM yield of seeds was significantly higher in 20 cm distance than that of 40 cm, and the yield of straw was the same trend. On the other hand, there was no significant difference in DM yield between 20 cm and 30 cm and also in the feed value of straw after seed harvesting among seeding distance. The average CP, ADF, NDF, and TDN contents were 6.91, 36.76, 61.75 and 59.86%, respectively, and the RFV value was 91. Considering the above results, the production of Italian ryegrass seeds sown in the spring in the highlands of the Gangwon is lower than that of autumn sowing, but it is judged that it needs to be reviewed in case it is unavoidable. In the future, there should be an economic analysis and the development of technology that can increase production.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.115-122
• /
• 2015

Purpose - This study was conducted to develop a beekeeping farm management standard checklist. This is essential to increase the competitive power of beekeeping farmers. Checklists in relation to crops and livestock were established by the Rural Development Administration in the 2000s. To date, 60 checklists have been created by crop and livestock experts. However, other farmers outside the 60 checklists are increasing. Therefore, extra development is required for these farmers. This study was conducted to meet farmers' requirements. The special farming dealt with in this study is beekeeping. Such checklists were not developed due to the small number of beekeeping farmers. However, these days, a number of such farmers are emerging. Research design, data, and methodology - Many related experts participated in this study. This study was conducted in four stages. First, a basic outline of beekeeping was created by surveying many kinds of beekeeping experts. The draft of the beekeeping checklist was created by a secondary advisory council. This draft was then sent to 14 beekeeping experts to confirm whether or not it was suitable as a management checklist. For collecting the experts' opinions, a direct visit survey was done through an arranged questionnaire. Additionally, a basic management checklist blueprint was reviewed by many experts. In the third stage, a Delphi survey method was utilized with a special Delphi questionnaire. In this stage, experts who participated in the first and second stages were excluded. As there were uncertain answers among them, a second Delphi survey was done. As a result of this survey, all answers were agreed among them. Results - From the results of this survey, four subjects in the management accomplishment index were determined. These are farming scale, average product per beehive, the sale price of honey (1kg), and the number of bee plates in the beehive. In the case of the management checklist content, five items were determined. These are beekeeping farming facilities, the environment around the farm land and general management, the product management of the beekeeping harvest, the management of the disease and pest, and farming management. This checklist will be utilized for beekeeping farmers to implement in a management situation. Conclusions - These days, the number of beekeeping farmers is increasing. The management checklist for beekeeping farmers will be used to improve their farming situation and marketing. Beekeeping farmers can understand their management by reviewing their checklist. After checking, the situation of management can be analyzed. Farmers can supplement weaknesses with expert advice. This checklist will be used by agricultural technique extension workers for farming management consulting. This checklist has to be complemented by a change in the management of the environment. This checklist will be delivered to beekeeping farmers after a verification survey is done. The result of the checklist score will be utilized for a benchmarking service to be implemented for beekeeping farmers to utilize.

• Journal of Environmental Science International
• /
• v.28 no.12
• /
• pp.1061-1069
• /
• 2019

Common reed (Phragmites australis) is widespread in reclaimed land and wetland habitats. Every year, the common reed produces extensive colonies by means of underground rhizomes and ground-surface stolons. From an agricultural point of view, the common reed's large biomass is a good material for supplying organic matter. However, it has not yet been studied in terms of seedling production, transplanting conditions, and decomposition characteristics in reclaimed land. Seeds were harvested from the native common reed in Saemangeum, South Korea, the previous year and stored on an open field. The seeds were sowed in the greenhouse at the beginning of April. Common reed decomposition was studied from June to September, with the use of coarse mesh (5 mm) stem litterbags, on three samping dates and with five replicate packs per sample. These packs were dug in five soil condition (low-salinity topsoil, subsoil, high-salinity topsoil, subsoil, paddy topsoil) to 0.2 m and 0.4 m depth. The highest germination rate of common reed seeds was observed in non-salt solution, but the exhibited germination rate was 70% at 9.38 dS m^-1. The plant height of young reed decreased steadily with increasing salinity, but leaf number did not decrease by 9.38 dS m^-1. The survival rate of the two-year-old reed was 83.3%, which was 35% higher than that of the one-year reed. The transplant success rate was 0% in the no vinyl mulching in the soil, but the first year and second year seedlings survived rates were 63% and 83.3%, respectively, in vinyl mulching. Common reed decomposition rates were faster low salinity than high salinity. All nutrient contents were found to fluctuate significantly with time by soil conditions. We also need to study the growth rate of reed transplanting seedlings by soil moisture contents and the comparison of degradation in common reed tissues.