• The Journal of Internal Korean Medicine
• /
• v.19 no.2
• /
• pp.278-299
• /
• 1998

This study was aimed to evaluate the anti-stress effect of danchisoyosan on the rats stressed by immobilization. The experimental animals were immobilized in the stress box($5{\times}5{\times}20cm$) for 12 hours in a day during 3 days, and administered $500mg/5m{\ell}/g$ of Danchisoyosan extract for 14 days before stress. There were measured the change of body weight and organ weight under immobilized-stress. The norepinephrine, epinephrine, dopamine, serotonine contents were measured by HPLC method in rat brain. There were measured the GOT, GPT contents in serum and tissue lipid peroxidation in the brain, liver, spleen, adrenalgland, pancreas, testes, thymus, heart. The following results were obtained: 1. The change of organ weight was significantly lower in control than normal group. Sample group inhibited decreased weight from stress comparing to control group. 2. Lipid peroxidation in the liver was significantly higher in control than normal group. Sample group shows significant decrease comparing to control group. 3. Lipid peroxidation in the kidney was significantly higher in control than normal group. Sample group shows significant decrease comparing to control group. 4. GPT contents in serum was significantly higher in control than normal group. Sample up shows significant decrease comparing to control group. 5. Dopamine contents in the brain was significantly higher in control than normal group. Sample group shows significant decrease comparing to control group. 6. Serotonine contents in the brain was significantly higher in control than normal group. Sample group shows significant decrease comparing to control group.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2442-2449
• /
• 2002

This paper provides an reference stress based J estimation equation fur cylinders with finite internal axial surface cracks under internal pressure. In part 1, the J estimation equation based on deformation plasticity using Ramberg-Osgood (R-0) materials is proposed. In this paper, the developed CE/EPRI -type solutions ale then re-formulated based on the reference stress concept. Such a re-formulation provides a simpler equation for J. estimation are then further extended to combined internal pressure and bending. The proposed reference stress based J estimation equation is compared with elastic-plastic 3-D FE results using actual stress-strain data for a Type 304 stainless steel. Good agreement between the FE results and the proposed reference stress based J estimations provides confidence in the use of the proposed method to elastic -plastic fracture mechanics of pressurised piping.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.1
• /
• pp.63-72
• /
• 2020

Objective : The purpose of this study is to identify and understand the internal and external control of the caregivers of elderly with severe dementia and the effects of care stress on depression, and to provide basic data of occupational therapy intervention. Methods : The internal and external control, care stress, and depression were examined in questionnaires for the caregivers of elderly who were diagnosed with moderate or higher degree of dementia through CDR by medical institutions. Internal and external control and depression by care stress was analyzed by using independent samples t-test and ANOVA, and the effects of internal and external control and care stress on depression were analyzed by performing multiple regression analysis. Results : The results were as follow; The first, there was a significant degree of depression according to difference of internal and external control. The second, there was a significant degree of classification in the care stress. The third, the effects of internal controls and care stress on depression were shown to be statistically significant. Conclusion : Based on the analyzed results, the caregivers of elderly with severe dementia needs to seek the role of a occupational therapist who can enhance internal control and lower care stress in intervention of occupational therapy because internal control and care stress can affect depression.

• The Journal of Korean Medicine
• /
• v.26 no.3 s.63
• /
• pp.162-175
• /
• 2005

Backgrounds : Two stress pathways, the hypothalamic-pituitary-adrenal (HPA) axis and the sympathetic nervous system, regulate immune system responses through release of corticosteroids, norepinephrine and epinephrine. respectively. These neuromediators act on immune cells via specific receptors on their surface to modulate the production of key regulatory cytokines. Objectives : To evaluate the preventive effects of oriental medicine Hyeolbuchukyeo-tang (HC) on stress. Methods : Mice were divided into three groups: nounal group, control group under immobilization stress and HC group which received Hyeolbuchukyeo-tang (HC) under immobilization stress. following sacrifice, their splenocytes were isolated and splenocyte surface markers were determined. The brains were removed and mRNA determined. In vivo, we separated RNA Iron cultured macrophages (RAW264.7). Results : In our study, immune functions were decreased in stress due mainly to changes of various neuromediators, cytokines and macrophage activities, and the treatment of HC increased those expressions. Conclusions : In summary, the present study documents the anti-stress effects of HC through stress-immune regulation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.57-66
• /
• 2012

The purpose of this study was to evaluate the relation between intentionally induced internal stress and cyclic fatigue failure of ProTaper Universal. ProTaper Universal (Dentsply Maillefer) S1, S2, F1, F2, F3, F4 and F5 (25 mm length) were used in this study. To give the internal stress, the ProTaper Universal were put into the .02 taper Endo-Training-Bloc (Dentsply Maillefer) until auto-stop by torque controlled motor. The rotation speed was 300 rpm and torque value was 1.0 Ncm. ProTaper Universal were grouped by the induced number of internal stress and randomly distributed among one control group and three experimental groups (n=10). The four groups were Stress 0 (control), Stress 1, Stress 2 and Stress 3. These instruments were rotated until separation. For cyclic fatigue measurement, inclined plane was used and time for separation was recorded. It was statistically analyzed using two-way ANOVA and Duncan post-hoc test at 95% confidential level. In all ProTaper Universal, there was statistically significant decrease on time for separation in Stress 3. In F2 and F3, there were statistically significant difference between control group and all experimental groups. And in F4 and F5, Stress 2 and 3 groups showed significantly lower cyclic fatigue resistance from Stress 0 group. In the limitation of this study, cyclic fatigue failure of ProTaper Universal is influenced by accumulated internal stress.

• Journal of Forest and Environmental Science
• /
• v.14 no.1
• /
• pp.89-100
• /
• 1998

The study was carried to investigate the change of internal stress and physical properties of paper by the mutiplying of paper structuring that is an useful means to maximize the performance and use of the fiber raw material. The effects of recycled fiber on the physical properties of multiplied paper also were studied. The beating increased the internal stress of single layered paper, while filler loading decreased the internal stress. Multiplying the structure of paper decreased the internal stress and the most of physical properties except for tear index. It was found that the properties of paper could be changed by the pulp type, beating and the combination of raw materials. The introduction of filler in the middle and/or outer layer could improved the internal stress, tensile index, tear index and burst index. The addition of recycled fiber increased the opacity and stiffness of paper in both single layered and multiplied paper. Multiplying the structure of paper improved the air permeability and stiffness, while decreased burst index.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.171-172
• /
• 2006

Most existing studies for stress analysis of teeth have employed small number of teeth, and used big element size using F-E models. Therefore, the results are not accuracy enough for showing the internal stress variation. 15 males' and 13 females' mandibular first premolar are employed for internal structure's study of teeth and small element size for a FE model are used. According to these processes, stress distribution of internal parts of teeth are well shown, and the stresses are varied a lot between enamel layer and dentine layer, but there is little variation on pulp chamber.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.4
• /
• pp.156-162
• /
• 2005

Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electro-plating for MEMS devices. The iron content of the deposits was changed by varying the nickel/iron ion ratio in the electrolyte. X-ray diffraction (XRD) analysis was applied for measuring the strength of the texture and grain size of the deposits. The nickel/iron atom ratio of the deposits was analyzed by EDS. The hardness of the alloys was evaluated by Vickers hardness indenter. The internal stress of the deposits was measured by Thin Film Stress Measurement using Stoney's formula. Surface morphology and roughness were investigated by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The results of this study revealed that at a grain size of approximately $17\~24$nm the hardness, internal stress and roughness depend strongly on the iron content. With increasing the iron content, the hardness and internal stress of the deposits increased. An excellent correlation between the increase in the internal stress and the loss of (200) texture was found.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.2
• /
• pp.100-108
• /
• 1996

The internal stress of acidic electroless nickel deposits on zincated aluminum was determined by spiral contractometer. Several plating conditions such as inhibitor and complexing agent concentrations and pH affecting the internal stress were studied. The resulting intrinsic stress contribution to the total stress was discussed in terms of phosphorous content of the deposit, solution pH, and surface morphology. However, the most important was found to be thermal stress for the total stress of Al substrate, because of high thermal expansion coefficient of the aluminum substrate.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.356-372
• /
• 2004

Statement of problom: In the internal connection system the loading transfer mechanism within the inner surface of the implant and also the stress distribution occuring to the mandible can be changed according to the abutment form. Therefore it is thought to be imperative to study the difference of the stress distribution occuring at the mandible according to the abutment form. Purpose: The purpose of this study was to assess the loading distributing characteristics of 3 implant systems with internal connection under vertical and inclined loading using finite element analysis. Material and method: Three finite element models were designed according to the type of internal connection of ITI(model 1), Friadent(model 2), and Bicon(model 3) respectively. This study simulated loads of 200N in a vertical direction (A), a $15^{\circ}$ inward inclined direction (B), and a $30^{\circ}$ outward inclined direction (C). Result: The following results have been made based on this numeric simulations. 1. The greatest stress showed in the loading condition C of the inclined load with outside point from the centric cusp tip. 2. Without regard to the loading condition, the magnitudes of the stresses taken at the supporting bone, the implant fixture, and the abutment were greater in the order of model 2, model 1, and model 3. 3. Without regard to the loading condition, greater stress was concentrated at the cortical bone contacting the upper part of the implant fixture, and lower stress was taken at the cancellous bone. 4. The stress of the implant fixture was usually widely distributed along the inner surface of the implant fixture contacting the abutment post. 5. The stress distribution pattern of the abutment showed that the great stress was usually concentrated at the neck of the abutment and the abutment post, and the stress was also distributed toward the lower part of the abutment post in case of the loading condition B, C of the inclined load. 6. In case of the loading condition B, C of the inclined load, the maximum von Misess stress at the whole was taken at the implant fixture both in the model 1 and model 2, and at the abutment in the model 3. 7. The stress was inclined to be distributed from abutment post to fixture in case of the internal connection system. Conclusion: The internal connection system of the implant and the abutment connection methods, the stress-induced pattern at the supporting bone, the implant fixture, and the abutment according to the abutment connection form had differenence among them, and the stress distribution pattern usually had a widely distributed tendency along the inner surface of the implant fixture contacting the a butment post.