• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.170-171
• /
• 2021

In Korea, the concentration of cities has led to the high-rise and deep-rise of buildings. In the case of such high-rise buildings, there is a high risk of fire, and the number of internal fires expanding to the outside continues to increase. The Korean Building Act continues to change the ban on combustible exterior materials, and combustible exterior materials are currently not available for buildings with three stories or more than 9 meters, and detailed test standards for finishing materials are also strengthened after the Ulsan residential and commercial fires in 2020. However, the path of fire in the actual building is through a series of processes in which the fire in the compartment grows internally and expands through openings supplied with ventilation factors. Therefore, other than just external materials, design criteria for embedded materials also need to be established. The purpose of this study is to compare standards for internal and external materials at home and abroad and to secure basic data for fire safety design of buildings based on them.

• 산업공학
• /
• 제7권2호
• /
• pp.25-30
• /
• 1994

ISO 9000 is a series of several standards(ISO 8402, 9000, 9001, 9002, 9003, 9004,...). ISO 9000 is a standard explaining fundamental concepts, defining important terms, and providing guidance for selecting among the other standards. ISO 9001, the most comprehensive standard to ensure quality in design, development, production, installation, and servicing. ISO 9002 is used to assure conformance to specification, installation and servicing. ISO 9003 has the least requirement among three standards and applies to inspection and final testing. ISO 9004 is a standard developed for internal use only and not applicabe to contractual arrangements. In this paper, quality system requirements for ISO 9000 series are also specified.

• 대한의용생체공학회:의공학회지
• /
• 제43권3호
• /
• pp.147-152
• /
• 2022

This research is to measure real-time temperature distribution inside a tissue-mimicking phantom for the safety and effectiveness evaluations of focused ultrasound (FUS) device capable of linear scanning stimulation. Since the focusing area of the FUS stimulation device is smaller than diameter of conventional thermal probe and keeps moving, it is impossible to monitor temperature distribution inside the phantom. By using the phantom with a thin film temperature sensor array inserted, real-time temperature change caused by the FUS device was measured. The translation of the measured temperature peak was also tracked successfully. The present phantom had been experimentally proven to be applicable to validate the performance and safety of the therapeutic ultrasound devices.

• 분석과학
• /
• 제14권3호
• /
• pp.244-252
• /
• 2001

어류근육속에 포함된 nonylphenol(NP), octylphenol(OP), bis(2-ethylhexyl)phtalate(BEHP)의 동시 정량방법을 1-phenyldecanol(PD)과 bis(2-ethylbutyl)phthalate(BEBP) 2가지 내부표준물질을 이용하여 연구하였다. 1-phenyldecanol은 nonyphenol과 octylphenol을 정량하고, bis(2-ethylbutyl)phthalate는 bis(2-ethylhexyl)phthalate를 정량하기 위해 사용하였다. NP와 OP의 경우 $0.2{\sim}20{\mu}g/g$ 농도범위에서 75% 이상의 회수율을 나타냈으며, BEHP는 $0.4{\sim}40{\mu}g/g$ 농도범위에서 102% 이상의 회수율을 보였다. 시료를 밀폐된 배양시험관에서 이염화메탄을 이용하여 추출하고 용매를 이소-헥산으로 바꾸고 aminopropyl 칼럼(2g)을 이용하여 분리한후 GC/MS-SIM 방법으로 분석하였다. 확립된 분석방법을 11점의 한국시료와 3점의 영국시료에 적용하였다. Nonylphenol은 2점의 한국어류시료에서, BEHP는 9점의 한국어류시료에서 검출되었고, 그 농도범위는 각각 $0.02{\sim}0.06{\mu}g/g$과 $0.18{\sim}2.03{\mu}g/g$이었다. 그러나 영국어류시료에서는 단 1점의 시료에서 BEHP가 검출되었고 그 농도는 $2.99{\mu}g/g$이었다. 이 방법에 의해서 octylphenol은 어떠한 시료에서도 검출되지 않았으며, 이와 같이 2가지 내부표준물질을 이용하는 방법은 각기 다른 특성을 갖는 분석대상물질에 각각의 특성과 유사한 내부표준물질의 사용으로 매우 적은량의 생체 시료에서 보다 정확한 정량이 가능하였다.

• 한국대기환경학회지
• /
• 제23권5호
• /
• pp.515-525
• /
• 2007

In this study, various techniques for measurement and analysis of PAHs in the ambient air were verified in order to select a more reliable method. Sampling and analysis of PAHs were done by the EPA TO-13a method. QA/QC of the measurement was conducted to minimize errors in sampling and analyzing processes. The linearity of calibration curve of the PAH standards was good ($R^2{\geq}0.99$). Audit accuracy was evaluated using 5 internal standards of PAHs ($Naphthalene-d_8,\;Acenaphthene-d_{10},\;Phenanthrene-d_{10},\;Chrysene-d_{12},\;Perylene-d_{12}$). Relative standard deviations of the internal standard of the PAHs were ranged from 6.22% for $acenaphthene-d_{10}$ to 8.11% for $chrysene-d_{12}$. To evaluate the surrogate recoveries, two field surrogate standards of PAHs ($fluoranthene-d_{10},\;benzo(a)pyrene-d_{12}$) and two extract surrogate standards of the PAHs ($fluorene-d_{10},\;pyrene-d_{12}$) were spiked into all samples before field sampling and sample extraction, respectively. Recoveries of field the surrogate standards ranged from $80.4{\pm}12.2%$ for $fluoranthene-d_{10}$ to $66.2{\pm}12.8%$ for $benzo(a)pyrene-d_{12}$. Extraction recoveries of the surrogate standards ranged from $70.4{\pm}10.2%$ for $fluorene-d_{10}$ to $77.6{\pm}10.8%$ for $pyrene-d_{10}$. The detection limit of benzo(a)pyrene among 16 PAHs standards for quantitation was 20 pg.

• Asian Journal of Business Environment
• /
• 제5권2호
• /
• pp.23-29
• /
• 2015

Purpose - This theoretical study develops practical recommendations for implementing a quality management system (QMS) in Kazakh organizations to ensure the effectiveness and safety of products and services. We discuss the improvement of Kazakhstan's quality standards based on the requirements of ISO 9000. Research design, data, and methodology - We provide methods for improving the quality standards system, ranging from research and development to the sale of products. We also propose to establish a special quality systems award to motivate enterprises toward product quality improvement. The study's methodological basis included Kazakhstan's legislative and regulatory Acts, and international and national standards defining QMS requirements for scientists worldwide to develop and implement a QMS for enterprises. Results - Aligning the QMS reduces Kazakh companies' costs for the detection and correction of defects, and the external and internal loss caused by the defects. Effective QMS also reduces management costs. Conclusion - This article can help increase the transparency of organizations for their leaders and (if necessary) the external environment, and improve the accuracy, quality, and timeliness of decision-making.

• 한국콘텐츠학회논문지
• /
• 제17권12호
• /
• pp.368-377
• /
• 2017

본 연구는 고등교육기관 평가 인증제와 대학재정지원사업을 중심으로 대학 자체교육인증제의 시행배경을 살펴보고, A대학의 사례를 중심으로 운영상의 문제점을 확인하여 대학 자체교육인증제의 개선 방안을 도출하는 것을 목적으로 한다. 이를 위해 A대학에서 2016년도에 실시한 평가위원 및 인증위원과의 면담자료와 자체교육인증 관련 회의록 등을 Nvivo11을 사용하여 질적 자료 분석의 단계에 따라 분석하였다. 분석 결과 A대학의 사례를 통해 나타난 자체교육인증제의 운영상 문제점은 첫째, 학과의 과중한 행정업무 부담에 따른 자체인증제 참여 부담, 둘째, 모호한 평가지표로 인한 보고서 작성과 평가의 어려움 등으로 확인되었다. 자체교육인증제의 개선방안으로는 첫째, 충분한 준비기간 제공과 준비자료의 세부 안내, 둘째, 구체적인 피드백과 함께 지속적이고 체계적인 관리, 셋째, 상시 성과기록 시스템 구축, 넷째, 별도 재인증 기준 마련, 다섯째, 학과 특성을 반영한 평가 기준 설정, 마지막으로 자체평가보고서의 공통 양식 제공 등이 제시되었다.

• 분석과학
• /
• 제34권5호
• /
• pp.202-211
• /
• 2021

Volatile organic compounds (VOCs) in hazardous air pollutants (HAPs) have been regulated by the Air Pollution Control Act (1978) and their atmospheric concentrations have been monitored in 39 monitor sites in Korea. However, measurement standards of volatile organic compounds (VOCs) in HAPs at ambient levels have not been established in Korea. Primary reference gas mixtures (measurement standards) at ambient levels are required for accurately monitoring atmospheric VOCs in HAPs and managing their emissions. In this study, primary reference gas mixtures (PRMs) at 5 nmol/mol were developed in order to establish primary national standards of VOCs in HAPs at ambient levels. Primary reference gas mixtures (PRMs) were prepared in pressurized aluminum cylinders with special internal surface treatment using gravimetric method. Analytical methods using gas chromatography-flame ionization detector (GC-FID) coupled with a cryogenic preconcentrator were also developed to verify the consistency of gravimetrically prepared HAP VOCs PRMs. Three different columns installed in the GC-FID were evaluated and compared for the retention times and separation of eighteen target components in a chromatogram. Results show that the HAP VOCs PRMs at 5 nmol/mol were consistent within a relative expanded uncertainty (k=2) of less than 3 % except acrylonitrile (less than 6 %) and the 18 VOCs were stable for 1 year within their associated uncertainties.

• Journal of the Korean Wood Science and Technology
• /
• 제51권4호
• /
• pp.253-269
• /
• 2023

Oriented strand board (OSB) distributed in Korea was collected, and its mechanical properties were investigated according to the International Organization for Standardization (ISO), Japanese Industrial Standards, and Korean Design Standard. Ten types of OSBs were collected, including six types for walls and others for floors. The thickness swelling, moisture content, and density of each product satisfied the ISO standards. All products showed lower formaldehyde emission values than those of the SE0 grade. The internal bonding strengths of all products, except products B, H, and I, met the ISO standards. However, products A, B, C, F, and H did not satisfy the thickness swelling standard of the load-bearing OSB for use in dry conditions. Products D and G showed heavy duty load-bearing OSB for use in humid conditions in terms of internal bonding and bending strength after boiling. In the nail head pull-through force and lateral nail resistance tests, all products met the standards. In terms of the structural bending performance (four points), the six types of OSBs for walls satisfied the standard for bending strength and modulus of elasticity. All the products for flooring met the standard for bending strength but, except for product G, the products did not meet the standard for modulus of elasticity. Although the results of this study cannot represent the performance of all imported OSBs, considering the above results, the water resistance performance of seven types of OSB products did not meet the standard, and 10 types of products did not match the labeling grades.

• Wind and Structures
• /
• 제11권6호
• /
• pp.427-440
• /
• 2008

Estimates of wind-induced wind effects on tall buildings are based largely on 1980s technology. Such estimates can vary significantly depending upon the wind engineering laboratory producing them. We describe an efficient database-assisted design (DAD) procedure allowing the realistic estimation of wind-induced internal forces with any mean recurrence interval in any individual member. The procedure makes use of (a) time series of directional aerodynamic pressures recorded simultaneously at typically hundreds of ports on the building surface, (b) directional wind climatological data, (c) micrometeorological modeling of ratios between wind speeds in open exposure and mean wind speeds at the top of the building, (d) a physically and probabilistically realistic aerodynamic/climatological interfacing model, and (e) modern computational resources for calculating internal forces and demand-to-capacity ratios for each member being designed. The procedure is applicable to tall buildings not susceptible to aeroelastic effects, and with sufficiently large dimensions to allow placement of the requisite pressure measurement tubes. The paper then addresses the issue of accounting explicitly for uncertainties in the factors that determine wind effects. Unlike for routine structures, for which simplifications inherent in standard provisions are acceptable, for tall buildings these uncertainties need to be considered with care, since over-simplified reliability estimates could defeat the purpose of ad-hoc wind tunnel tests.