• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.340-350
• /
• 2020

This study was conducted to present comprehensive professionalism measurement tools suitable for hospital administration staffs. The study used measurement tools related to the psychological and behavioral characteristics of individuals used in prior studies for administration staffs at general hospitals and hospitals. Factor analysis and reliability analysis were conducted to verify the validity and internal relevance. As a result of the analysis, it was concluded that composed of 5 factors, and that the total reliability was 94.4%, which was very reasonable as a comprehensive professionalism measurement tool. Therefore, each component was defined as Confidence of Job performance, Salary Adequacy, Pride in Duties, Ability to achieve work goals, and Work Autonomy in order to provide a clear meaning. Professionalism from a modern perspective is a broader concept than traditional professionalism, including the subjective perceptions of job values and individuals' their abilities. Therefore, comprehensive professionalism measurement tools presented in this study will be very suitable and useful for hospital administration staffs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.60-69
• /
• 2000

This paper describes a single-chip full-custom implementation of pipelined adaptive decision-feedback equalizer(PADFE) using a 0.25-${\mu}m$ CMOS technology for wide-band wireless digital communication systems. To enhance the throughput rate of ADFE, two pipeline stages are inserted into the critical path of the ADFE by using delayed least-mean-square(DLMS) algorithm. Redundant binary (RB) arithmetic is applied to all the data processing of the PADFE including filter taps and coefficient update blocks. When compared with conventional methods based on two's complement arithmetic, the proposed approach reduces arithmetic complexity, as well as results in a very simple complex-valued filter structure, thus suitable for VLSI implementation. The design parameters including pipeline stage, filter tap, coefficient and internal bit-width, and equalization performance such as bit error rate (BER) and convergence speed are analyzed by algorithm-level simulation using COSSAP. The single-chip PADFE contains about 205,000 transistors on an area of about $1.96\times1.35-mm^2$. Simulation results show that it can safely operate with 200-MHz clock frequency at 2.5-V supply, and its estimated power dissipation is about 890-mW. Test results show that the fabricated chip works functionally well.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.780-786
• /
• 2007

Statement of problem. The performance and maintenance of implant-supported prostheses are primarily dependent upon load transmission both at the bone-to-implant interface and within the implant-abutment-prosthesis complex. The design of the interface between components has been shown to have a profound influence on the stability of screw joints. Purpose. The Purpose of this study was to compare the strength and the fatigue resistance of 1-piece and 2-piece abutment connected to oral implant, utilizing an internal conical interface. Material and methods. Twenty $Implatium^{(R)}$ tapered implants were embedded to the top of the fixture in acrylic resin blocks. Ten $Combi^{(R)}$(1-piece) and $Dual^{(R)}$(2-piece) abutments of the same dimension were assembled to the implant, respectively. The assembled units were mounted in a testing machine. A load was applied perpendicular to the long axis of the assemblies and the loading points was at the distance of 7mm from the block surface. Half of 1-piece and 2-piece abutment-implant units were tested for the evaluation of the bending strength, and the others were cyclically loaded for the evaluation of the fatigue resistance until plastic deformation occurred. Nonparametric statistical analysis was performed for the results. Results. Mean plastic and maximum bending moment were $1,900{\pm}18Nmm,\;3,609{\pm}106Nmm$ for the 1-piece abutment, and $1,250{\pm}31Nmm,\;2,688{\pm}166Nmm$ for the 2-piece abutment, respectively. Mean cycles and standard deviation when implant-abutment joint showed a first plastic deformation were $238,610{\pm}44,891$. cycles for the 1-piece abutment and $9,476{\pm}3,541$ cycles for the 2-piece abutment. A 1-piece abutment showed significantly higher value than a 2-piece abutment in the first plastic bending moment (p<.05), maximum bending moment (p<.05) and fatigue strength (p<.05). Conclusion. Both 1-piece and 2-piece conical abutment had high strength and fatigue resistance and this suggests long-term durability without mechanical complication. However, the 1-piece conical abutment was more stable than the 2-piece conical abutment in the strength and the fatigue resistance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.89-90
• /
• 2011

The purposes of this study were to analyze the effects of a marine leisure exhibition event(MLEE)'s appraisal attributes on visitors' satisfaction and repurchase behavior and thus provide fundamental information that facilitates developing effective marketing and operational strategies for a MLEE. In order to accomplish such purposes, this study employed a survey with a total of 300 visitors to a MLEE hosted by G Province. Questionnaires were developed on the basis of related studies and modified to reflect the study context. Then, such questionnaires were verified to be valid and reliable through content validity, exploratory factor analysis and internal consistency analysis. Valid 286 questionnaires were analyzed with correlation analysis and multiple regression analysis on significance level of .05. Following findings were derived from current study. First of all, the appraisal attributes of a MLEE had a significant effect on visitors' satisfaction and among them only the factor of event program had a unique relation with the levels of satisfaction. In addition, the appraisal attributes of the MLEE also had a significant effect on visitors' repurchase behavior and among them event program, transportation and employee factors had unique relations with the performance variable in order. In conclusion, all the research hypotheses that had been set up through previous studies were confirmed in this study.

• Food Science and Preservation
• /
• v.9 no.4
• /
• pp.418-424
• /
• 2002

This study was undertaken to develop the optimum baking formular and process in making the improved soy-wheat composite breads furtified with soy flour, which has been known for a source of biologically active phytochemicals and for more vegetable proteins as well. The effects of the addition of soy flour on a rheological properties of dough, on the sensory characteristics of breads, and on the possibilities of commercialization of these functional breads were investigated. As the added amount of soy flour increased, water absorption, development time and the weakness value of dough were increased, but dough stability were decreased in the farinograph. In the extensograph, the more soy flour was added, the less the extensibility and the resistance to extention were shown. As the amount of soy flour increased, gelatinazation point was increased in the amylograph, but the maxium viscosity was decreased. As the added amount of soy flour was increased, b value(yellowness) was obviously increased, L value(lightness) was slightly decreased. However, a value(redness) was not nearly changed in the color of cut loaves. In sensory evaluation, the more soy flour was added, the less the external, the internal characteristics and the eating qualities were shown. Accorting to the addition of soy flour, the toughness and the brittleness tended to be increased proportionally. The dough of 10% soy-wheat composite flour(SF10) was the most favorable on the baking performance.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.10
• /
• pp.771-782
• /
• 1991

In industrial multivariable plants, it is ofte the case that the plant outputs are measured in similar components not simultaneously but serially. In this paper, the problem of estimating the state vector of the plant based on the data obtained from such a measuring scheme is considered, and a special type of observer(referred to as a $'$multiple serial-sampling$'$ type observer) which renews its internal states whenever a new group of data is obtained is proposed. It is proved that such an observer can be constructed for almost every sampling period if the palnt is observable as a continuous-time multivariable system, and that the poles of the closed-loop system using the multiple serial-sampling type observer consist of the poles of the observer and those of the state feedback system. The behaviors of the observer and the closed-loop system are studied by simulation. The results of simulation indicate that a multiple serial-ampling type observer can estimate the state of the plant more accurately than the ordinary type observers and improve the closed-loop performance, especially, in the existence of measuring noise.ng noise.

• International Commerce and Information Review
• /
• v.14 no.2
• /
• pp.147-172
• /
• 2012

The aim of this research is to identify the competencies required by freight forwarding company logistics managers or supply chain managers. And this research also attempts to show their relative importance and key knowledge areas that require improvement. Using a survey questionnaire, data was collected against forty three logistics and supply chain management skills or competencies, which were then grouped into four categories and analysed. The Analysis revealed that supply chain awareness, ability to make decisions, analytical skill, communication skill, supply chain cost, people skill, and integration of internal or external information flow which belong to logistics planning group are considered the most important competencies for effective and efficient logistics functioning. On the other hand, reverse logistics and IATA regulations from environmental awareness group show little influence on logistics managers for improving their logistics performances. The results have implications for a variety of parties including prospective logisticians, students, teachers and companies considering expanding their business to Chinese market. For example, the results permit companies to employ appropriate logistics managers who are qualified with sufficient skills and competencies suggested in this research. In the case of practitioners, the results provide a benchmark for comparison with their current level of abilities and suggested competencies.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.331-340
• /
• 2013

The recent economic downturn has created new challenges for today's company workers such as increased job instability; layoffs; the need to maintain dual income households and the associated childcare requirements; and other job stresses. These stresses give rise to serious problems for workers and ultimately to organizations. Companies therefore need to pay attention to solving the problem of stress. These days, many companies seek a solution from EAP. EAP aims to support workers through counseling, consulting and coaching services to help them overcome issues which may adversely affect job satisfaction and performance. EAP was introduced in this country ten years ago. Formerly, many companies viewed stress primarily as a personal issue. But now more companies are in a hurry to adopt EAP as a means for individuals to resolve stress. This study draws on the example of EAP use in LG Hausys. The company has adopted EAP under the CEO's strong support. The company has effectively managed EAP services which include professional counseling and the training of internal counselors. This study derives implications for the further implementation of EAP services.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.73-80
• /
• 2004

In this paper, we present the cell resequencing buffer to solve the cell sequence integrity problem of the Cyclic banyan network that is a high-performance fault-tolerant cell switch. By offering multiple paths between input ports and output ports, using the deflection self-routing, the Cyclic banyan switch offer high reliability, and it also solves congestion problem for the internal links of the switch. By the way, these multiple paths can be different lengths for each other. Therefore, the cells departing from an identical source port and arriving at an identical destination port can reach to the output port as the order that is different from the order arriving at input port. The proposed cell resequencing buffer is a hardware sliding window mechanism. to solve such cell sequence integrity problem. To calculate the size of sliding window that cause the prime cost of the presented device, we analyzed the distribution of the cell delay through the simulation analyses under traffic load that have a nonuniform address distribution that express tile Property of traffic of the Internet. Through these analyses, we found out that we can make a cell resequencing buffer by which the cell sequence integrity is to be secured, by using a, few of ordinary memory and control logic. The cell resequencing buffer presented in this paper can be used for other multiple paths switching networks.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.535-542
• /
• 2015

A reactor containment acts as a final barrier to prevent leakage of radioactive material due to the possible reactor accidents into external environment. Because of the functional importance of the containment building, the SIT(Structural Integrity Test) for containments shall be performed to evaluate the structural acceptability and demonstrate the quality of construction. In this paper, numerical analyses are presented, which simulate the results obtained from the SIT for a prestressed concrete(PSC) structure. A sophisticate structural analysis model is developed to simulate the structural behavior during the SIT properly based on various preliminary analysis results considering contact condition among structural elements. From the comparison of the analysis and test results based on the acceptance criteria of ASME CC-6000, it can be concluded that the construction quality of the containment has been well maintained and the acceptable performance of new design features has been verified.