• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.273-277
• /
• 2002

In the electrode fabrication of unit cell, we found that optimal the electrochemical characteristics were obtained with at 90 wt.% of activated carbon(BP-20), 5 wt.% of conducting agent(Ppy, Super P) and 5 wt.% of P(VdF-co-HFP)/PVP mixed binder. The electrochemical characteristics of unit cell with Ppy improver were as follows : 37.6 F/g of specific capacitance, 0.98 $\Omega$ of AC-ESR, 2.92 Wh/kg and 6.05 Wh/L of energy density, and 754 W/kg and 1,562 W/L of power density. It was confirmed that internal resistance were reduced due to the increase of electrical conductivity and filling density by the introduction of conductivity agent, and content of conducting agent was suitable in the range of 4~6 wt.%. According to the impedance measurement of the electrode with conductivity agent, we found that it was possible to charge rapidly by the fast steady-state current convergence due to low equivalent series resistance(AC-ESR), fast charge transfer rate at interface between electrode and electrolyte, and low RC time constant.

• Journal of Korea Foundry Society
• /
• v.24 no.6
• /
• pp.347-355
• /
• 2004

In the die casting process, the flow of liquid metal has significant influence on the quality of casting products and die life. For the optimal process design of automobile gear housing, various analyses were performed in this study by using computer simulation code, MAGMAsoft. The simulation has been focused on the molten metal behaviors during the mold filling and solidification stages for the sound casting products. Also the internal defects were predicted by application of air pressure and feeding criteria.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.137-138
• /
• 2014

The aim of this research is suggesting the method of obtaining well-graded aggregates for concrete replacing the recycled aggregate which size range is from 5 to 13 mm to currently used gap-graded natural aggregates which size range is only 13 to 25 mm. according to the tests results, the workability of concrete was improved with replacing the aggregates of 5 to 13 mm of size range because of compensating gap-grading. Furthermore, there was an improvement in compressive strength when the aggregates of 5 to 13 mm of size range was replaced because obtained well-graded aggregates contributed on increasing adhesiveness and filling internal pore system. Comparing replacing recycled aggregate to natural aggregate, there was no significant difference on the performances.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.253-256
• /
• 2000

In order to commercialize the low cost composite fabrication technology in the area of domestic aerospace structure field, Resin Transfer Molding process has been considered as an alternative process to replace the high cost autoclave technology. The end part for the development of RTM process is the control rod of flight control system of aircraft. A braided preform was triaxially designed to improve the dimensional stability and mechanical property in the direction of external loads. Through the flow analysis using CVFEM, the resin filling time was calculated and the resin injection method was determined. The results of the flow analysis were directly applied to RTM mold design. The control rod was successfully manufactured by RTM process using internal pressure. The length and outer diameter of the manufactured part are 1148mm and 32mm, respectively.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.73-80
• /
• 2022

Unlike the CFT retrofit method, The EPFT retrofit method, which fills the steel tube with engineering plastic, does not require a separate concrete forming work and is a lightweight seismic Retrofit Method. In this study, an prototype model of the EPFT was proposed, and to analyze the seismic performance, an independent specimens and a reinforced concrete column were fabricated to conduct a seismic performance test. As a result of loading test of the independent specimens, the strength was increased compared to the steel tube column without internal filling, and the ductility ratio did not significantly increase due to the falling off of the weld. As a result of loading test of the concrete reinforcement specimen, the strength, ductility ratio, and energy dissipation were increased, and the number of cracks by loading step decreased compared to the non-reinforced specimen.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.67-68
• /
• 2021

In this study, Repair mortar was prepared using CNT powder with improved dispersibility and its characteristics were analyzed. As a result of the experiment, the compressive strength and flexural strength were found to be at similar levels compared to Plain without CNT. In addition, as a result of the drying shrinkage test, it was found that the drying shrinkage amount was decreased due to the effect of CNT mixed into the porous material filling the internal pores of the repair mortar.. The Bond strength of the repair mortar was at a similar level regardless of whether CNT was added or not

• The Korean Journal of Medicine
• /
• v.93 no.6
• /
• pp.538-547
• /
• 2018

Background/Aims: The impact of left ventricular (LV) diastolic function and filling pressure on clinical outcomes in young patients with acute myocardial infarction (AMI) has been poorly studied. Therefore, the aim of this study was to investigate the impact of LV diastolic function and LV filling pressure on major adverse cardiac events (MACEs) in young patients with AMI. Methods: A total of 200 young patients (males < 45 year, females < 55 year) with AMI were divided into two groups according to the diastolic function; normal (n = 46, $39.5{\pm}5.3$ years) versus abnormal (n = 154, $43.5{\pm}5.1$ years). Results: Despite regional wall motion abnormalities, normal LV diastolic function was not uncommon in young AMI patients (23.0%). During the 40 months of clinical follow-up, MACEs developed in 26 patients (13.0%); 14 re-percutaneous coronary intervention (7.0%), 8 recurrent MI (4.0%), and 4 deaths (2.0%). MACEs did not differ between the normal and abnormal diastolic function group (13.6% vs. 10.9%, p = 0.810), but MACEs were significantly higher in the high LV filling pressure group than the normal LV filling pressure group (36.8% vs. 10.5%, p < 0.001). On multivariate analysis, high LV filling pressure was an independent predictor of MACEs (hazard ratio 3.022, 95% confidence interval 1.200-7.612, p = 0.019). Conclusions: This study suggested that measurement of the LV filling pressure (E/e' ratio) would be useful in the risk stratification of young patients with AMI. However, it would be necessary to monitor this category of patient more carefully.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.1-8
• /
• 2020

The purpose of this study was to identify the factors that influence the organizational commitment of clinical dental hygienists to contribute to manpower management. The subject of the study was 195, and the following results were obtained as a result of collecting and analyzing data using a self-filling questionnaire from March 10 to April 20, 2020. The degree of organizational commitment, job satisfaction, and internal marketing according to general characteristics were analyzed by t-test and one-way ANOVA, and post-test was set to'Scheffe'. The correlation between organizational commitment, job satisfaction, and internal marketing showed a significant positive correlation with job satisfaction (r=0.689) and internal marketing (r=0.678). The factors influencing organizational commitment were multiple regression analysis, and the influencing factors for organizational commitment were internal marketing and job satisfaction. The most influential factor was job satisfaction, and the explanatory power was 56.1%.As a result, the internal marketing of clinical dental hygienists was found to be related to job satisfaction and organizational commitment, and the factor that most affected was job satisfaction. Therefore, institutional and administrative support from dental medical institutions is needed to improve job satisfaction, which has an impact on organizational commitment of clinical dental hygienists.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2008

The geotextile tube shall be sewen with geotextile longitudinally in the shape of hose and it shall be filled hydraulically through filling ports at the proper intervals to construct structure. Geotextile container shall be sewen after spreading of geotextile on the split barge and sealed shut after the filling soil, and then moved and positioned at the required position. And the geotextile container passes through the bottom of barge by opening split barge and drops to the seabed to form structure. This structure for the ${\bigcirc}{\bigcirc}$ project, UAE and we would propose that geotextile containment for core material of power plant breakwater to be constructed for lower bunds with containers up to -4.0m and do upper parts with the structures of tube up to 0.0m. For the application of proposed geotextile containment, review on stability of breakwaters and design consideration were adopted. The evaluation on stability of geotextile containment was classified by 3 items, internal design consideration for material selection, reviews on stability for individual and global structure. In this research, the geothermal analysis was performed to estimate the geothermal behavior of central breakwater. Central breakwater is located boundary of intake and outfall channel, it is mean that the central breakwater is thermal boundary of intake low temperature sea water and outfall high temperature sea water. Therefore, it is required to be designed a low permeability to ensure no mix of intake and outfall waters.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.167-172
• /
• 2012

This paper presents the technique separating objects on the single frame image from the background using region segmentation technique based on active contour. Active contour is to extract contours of objects from the image, which is set to have multi-search starting point to extract each objects contours for multi-object segmentation. Initial rough object segments are generated from binary-coded image using object specific contour information, and then the hole filling is performed to compensate internal segmentation caused by the change of inner object hole area and pixels. This procedure complements the problems caused by the noise from the region segmentation and the errors of segmentation near by the contour. The proposed method and conventional method is compared to verify the superiority of the proposed method.