• Journal of Communications and Networks
• /
• v.12 no.3
• /
• pp.266-274
• /
• 2010

The efficient network resource management is one of the important topics in a real-time system. In this paper, we present a practical network resource management framework, control-theoretic packet scheduler (CPS) system. Using our framework, an operating system can schedule both input and output streams accurately and efficiently. Our framework adopts very portable feedback control theory for efficiency and accuracy. The CPS system is able to operate independent of the internal network protocol state, and it is designed to schedule packet streams in fine-grained time intervals to meet the resource requirement. This approach simplifies the design of the CPS system, and leads us to obtain the intended output bandwidth. We implemented our prototype system in Linux, and measured the performance of the network resource management system under various network QoS constraints. The distinctive features of our principles are as follows: It is robust and accurate, and its operation is independent of internal network protocols.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.65 no.1
• /
• pp.61-72
• /
• 2023

The increase in the rearing intensity of pigs has caused deterioration in the pig house's internal environment such as temperature, humidity, ammonia gas, and so on. Traditionally, the widely used method to control the internal environment was through the manipulation of the ventilation system. However, the conventional ventilation system had a limitation to control the internal environment, prevent livestock disease, save energy, and reduce odor emission. To overcome this problem, the air-recirculated ventilation system was suggested. This system has a semi-closed loop ventilation type. For designing this system, it was essential to evaluate the ventilation rates considering the pressure loss of ducts. Therefore, in this study, pressure loss calculation and experiment were conducted for the quantitative ventilation design of a semi-closed loop system. The results of the experiment showed that the inlet through which external air flows should always be opened. In addition, it was also found that for the optimum design of the semi-closed loop ventilation system, it was appropriate to install a damper or a backflow prevention device rather than a ventilation fan.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.4
• /
• pp.33-41
• /
• 2004

This study examines the relationship between multiple sales force management practices and performance within each of Miles & Snow (1978)'s strategy types and Walker & Ruekert (1987)'s strategy types. The findings are as follows : First, Prospectors seem to be associated with increased performance when they are utilizing a relationship selling strategy, internal sales force, moderate levels of supervision, outcome-based control system and incentive-oriented compensation system. Second, Analyzers seem to be associated with increased performance when they are utilizing a relationship selling strategy, internal sales force, outcome-based control system to deal with the instability in their strategic focus. Third, Low Cost Defender seem to be associated with increased performance when they are utilizing a relationship selling strategy, external sales force, low levels of supervision, outcome-based control system and salary-oriented compensation system. Fourth, Differentiated Defenders seem to be associated with increased performance when they are utilizing a relationship selling strategy, high levels of supervision, balanced (outcome+behavior) control system and salary-oriented compensation system.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.285-287
• /
• 2006

The paper treats the nonlinear robust control of Chua's circuit having Chuar's diode as an element based on the internal model principle. The Chua's diode has unknown nonlinear parameters and the circuits parameters are alos assumend unknown. Nonlinear regulator equations are established to obtain 3-fold equilibrium equations on which the output error is zero. Also an internal model of the 3-fold exosystem is constructed for obtaining the control law. Pole Placement method is used for obtaining the feeback control law. Simulation results are presented for tracking the sinusoidal and constant reference input signal. Asymptotic trajectory control and the suppression of chaotic motion in spite of uncertainties in the system are accomplished.

• The Journal of Internal Korean Medicine
• /
• v.27 no.3
• /
• pp.698-705
• /
• 2006

Objectives : This study was designed to investigate the effect of PC6 and SP4 on autonomic nerve system in healthy adults. Methods : 22 healthy adults were recruited and randomized into the study group or control group. The study group (real acupuncture group) was acupuncturcd on PC6 and SP4. The control group (sham acupuncture group) was acupunctured superficially near PC6 and SP4 but not the exact points. The subjects rested for 10 minutes, and were then acupunctured. After 15 minutes, acupuncture needles were removed and the subjects rested for another 15 minutes. Heart rate variability(HRV) was continuously measured during the study period by FM-150 (digital Holter ECG recorder). Results : In the real acupuncture group. LF(low frequency) significantly decreased during the acupuncture period(p<0.05). LF/HF ratio also had a significant decrease during acupuncture period and the decrease was maintained during the post-treatment period as compared with the pre-treatment period. In the sham acupuncture group. LF significantly increased during the acupuncture period but LF/HF ratio had no significant changes. Conclusions : The results suggest that acupuncture on PC6 and SP4 can increase parasympathetic activity and balance autonomic nervous system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.1
• /
• pp.136-144
• /
• 2004

In general a hydraulic system which uses a single rod hydraulic as an actuator is modeled as a nonlinear system and reveals uncertain Parameter characteristics such as the density variation of hydraulic oil and is subject to load variations and severe disturbances during operation. A variable design-parameter fuzzy PID controller is adopted to solve these undesirable internal and external problems and its effectiveness is verified through computer simulations for control performance and real time control possibility.

• Electronics and Telecommunications Trends
• /
• v.8 no.3
• /
• pp.39-52
• /
• 1993

This study involves a Common Cause Failure (CCF) problem on the ultra-high reliability required system development such as war game operations, nuclear power control, air traffic control, space shuttle missions, and large scale network communication system. The system situation problems are defined according to CCF, reliability and system fault identifications for the development cast verifications in the multi-version redundant software system. Then, CCF analysis of redundant system, system principles and statistical dependence are also described. This validation oh the CCF in the human software interaction system will notify software engineers to conceive what really is CCF contribution factor, not only the internal but the external ones.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.315-321
• /
• 2005

Interactions among multiple control functions of a UPFC installed in a power system have been observed in power system simulation and been reported in authors' previous publications [1,2]. This paper presents new analytical results about these observed interactions and concludes that they are due to the control conflict between the series and shunt part of the UPFC, which are connected through the internal common capacitor inside the UPFC. Investigation in the paper reveals, for the first time as far as the authors are aware of, that the linkage pattern of UPFC series and shunt part decides whether the control functions implemented by the UPFC series and shunt part conflict each other or not. This linkage pattern of UPFC series and shunt part can be described by the flow of active power through the UPFC at steady-state operation of the power system. Hence in order to predict the possible interactions among multiple control functions of the UPFC, an interaction indicator is proposed in the paper which is the direction and amount of active power flow through the internal link of the UPFC series and shunt part at steady-state operation of the power system. This proposed interaction indicator can be calculated from power system load flow solution without having to run simulation of the power system with UPFC controllers installed. By using the indicator, the interactions among multiple control functions of the UPFC caused by badly set controller's parameters are excluded. Therefore the indicator only identifies the possible existence of inherent control conflict of the UPFC.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2003.05a
• /
• pp.338-346
• /
• 2003

Information Technology (IT) and the internet have been major drivers the changes in all aspects of the business processes and activities. They have brought major changes to the financial statements audit environment as well, which in turn has required modifications in audit procedures. There exist, however, certain difficulties with current audit procedures especially for the assessment of the level of control risk. This assessment is primarily based on the auditors' professional judgment and experiences, not based on the objective hies or criteria. To overcome these difficulties, this paper proposes a prototype decision support model named CRAS-CBR using case based reasoning (CBR) to support auditors in making their professional judgment on the assessment of the level of control risk of the general accounting system in the manufacturing industry. To validate the performance, we compare our proposed model with benchmark performances in terms of classification accuracy for the level of control risk. Our experimental results showed CRAS-CBR outperforms a statistical model (MDA) and staff auditor performance in average hit ratio.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.456-463
• /
• 2009

The paper presents a method for controlling induction motors using a nonlinear internal model control (IMC) approach. The process model and the inverse model are developed in the rotor flux coordinate. The main advantage of the proposed method is that it easily specifies the performance (steady state error, transient response, etc.) and the robustness of the controller by means of the IMC filters. Simulation results illustrate the effectiveness of the proposed method. Results on a real time system show that the control system has good performance and robustness against changes in motor parameters (rotor and stator resistances, rotor and stator inductances, rotor inertia).